• Atmosphere
• /
• v.26 no.4
• /
• pp.673-686
• /
• 2016

Understanding limitation of simulation for Planetary Boundary Layer (PBL) height in mesoscale meteorological model is important for accurate meteorological variable and diffusion of air pollution. This study examined the accuracy for simulated PBL heights using two different PBL schemes (MYJ, YSU) in Weather Research and Forecasting (WRF) model during the radiosonde observation period. The simulated PBL height were verified using atmospheric sounding data obtained from radiosonde observations that were conducted during 5 months from August to December 2014 over the Gumi weir in Nakdong river. Four Dimensional Data Assimilation (FDDA) using radiosonde observation data were conducted to reduce error of PBL height in WRF model. The assessment result of PBL height showed that RMSE with YSU scheme were lower than that with MYJ scheme in the day and night time, respectively. Especially, the WRF model with YSU scheme produced lower PBL height than with the MYJ scheme during night time. The YSU scheme showed lower RMSE than the MYJ scheme on sunny, cloudy and rainy day, too. The experiment result of FDDA showed that PBL height error were reduced by FDDA and PBL height at the nudging coefficient of $3.0{\times}10^{-1}$ (YSU_FDDA_2) were similar to observation compared to the nudging coefficient of $3.0{\times}10^{-4}$ (YSU_FDDA_1).

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.536-538
• /
• 2009

• Journal of Environmental Science International
• /
• v.14 no.3
• /
• pp.297-309
• /
• 2005

Recently air quality modeling studies for industrial complex and large cities located in the coastal regions have been carried out Especially, the representation of atmospheric flow fields within a model domain is very important, because an adequate air quality simulation requires an accurate portrayal of the realistic three­dimensional wind fields. Therefore this study investigated effect of using high resolution terrain height data and FDDA with observational data to reflect local characteristics in numerical simulation. So the experiments were designed according to FDDA and the detail terrain height with 3sec resolution or not Case 30s was the experiment using the terrain height data of USGS without FDDA and Case 3s was the experiment using the detail terrain height data of Ministry of Environment without FDDA and Case 3sF was experiment using the detail terrain height data of Ministry of Environment with FDDA. The results of experiments were more remarkable, In Case 3s and Case 3sF, temperature indicated similar tendency comparing to observational data predicting maximum temperature during the daytime and wind speed made weakly for difference of terrain height Also Case 3sF had more adequate tendency than Case 3s at dawn.

• Journal of Environmental Science International
• /
• v.15 no.8
• /
• pp.759-774
• /
• 2006

We employed two data assimilation techniques including MM5 Four Dimensional Data Asssimilation (FDDA) and Local Analysis and Prediction System (LAPS) to find out the effects of the changed inetial conditions on the wind fields simulation according to the objective analysis methods. We designed 5 different modeling cases. EXP B used no data assimilation system. Both EXP Fl using surface observations and EXP F2 with surface and upper-air observations employed MM5 FDDA. EXP Ll using surface observations and EXP L2 with surface and upper-air observations used LAPS. As results of, simulated wind fields using MM5 FDDA showed locally characterized wind features due to objective analysis techniques in FDDA which is forcefully interpolating simulated results into observations. EXP Fl represented a large difference in comparison of wind speed with EXP B. In case of LAPS, simulated horizontal distribution of wind fields showed a good agreement with the patterns of initial condition and EXP Ll showed comparably lesser effects of data assimilation of surface observations than EXP Fl. When upper-air observations are applied to the simulations, while MM5 FDDA could hardly have important effects on the wind fields simulation and showed little differences with simulations with merely surface observations (EXP Fl), LAPS played a key role in simulating wind fields accurately and it could contribute to alleviate the over-estimated winds in EXP Ll simulations.

• Journal of Environmental Impact Assessment
• /
• v.11 no.2
• /
• pp.109-116
• /
• 2002

The diagnostic and prognostic methods for generating 3 dimensional wind field were comparatively analyzed and 4 dimensional data assimilation (FDDA) technique by incorporating Automatic Weather System (AWS) into the prognostic methods was discussed for the urban scale air quality model. The A WS covered the urban scale grid distance of 10.6 km and 4.3 km in South Korea and Kyong-in region, respectively. This is representing that AWS for FDDA could be fairly well accommodated in prognostic model with the meso${\gamma}$~ microa scale (~5 km), indicating that the 3 dimensional wind field by FDDA technique could be a useful interpretative tool in urban area for the atmospheric environmental impact assessment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.181.1-181.1
• /
• 2010

기후변화의 주요인이 되는 온실가스 감축을 목표로 화석연료를 대체하기 위한 대체 에너지 개발을 위한 많은 노력이 진행되고 있다. 풍력 에너지와 같은 신재생에너지는 이러한 하나의 해결 수단이 될 수 있으며 풍력 에너지 사업의 활성화를 위해서는 정확한 풍력 정보 제공이 우선이다. 풍력-기상자원지도는 풍력 발전에 유용한 정보 제공을 위한 목적으로 중규모 수치 모델을 이용하여 작성된다. 본 연구에서는 중규모 수치 모델의 정확도 향상을 위한 자료동화 방법으로써 Four-Dimensional Data Assimilation (FDDA) 방법을 이용한다. 풍력-기상자원지도는 공간분해능 1 km 해상도로 개발된다. 풍력-기상자원지도는 1998-2008년까지의 평균적인 상태에 대하여 모의를 하기 위하여 통계적인 방법으로 11년 기간의 평균과 유사한 기간을 선정하였다. 풍력-기상자원지도는 연 평균, 월 평균 풍속과 주 풍향, 주풍향 발생 비율 등의 정보를 제공한다. 우리나라 풍속의 평균 분포는 내륙 산악지역, 남해안, 제주도에서 강풍이 발생하며 주 풍향은 대체로 북서풍이다. 주 풍향의 발생비율은 산악 지역과 남 동해안에서 높아 풍력 발전의 최적지 정보를 제공한다. 1 km 해상도의 모델과 관측의 오차는 서해안 등의 해안지역보다 강원 산악지역에서 오차가 더욱 증가하였다. 이러한 산악 지역의 오차는 복잡한 지형에서는 1km 미만의 수 백 m 해상도 수치모의가 필요함을 지시한다. 따라서 본 연구에서는 WRF-LES 모형을 이용하여 333m 해상도의 기상자원지도를 개발한다. 333m 해상도의 자원지도 영역은 강원도 지역에 대하여 모의되었다. 333m 해상도의 풍속 분포는 1km 해상도의 풍속 분포와 비교하였을 때 풍속의 분포가 보다 세밀하게 표현되었다. 정량적인 검증을 하였을 때 관측소에 따라 차이는 있었으나 1km 해상도에서 과대 모의된 풍속의 분포가 현저히 개선이 되었으며, 시간적인 경향도 잘 일치함을 보였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.1
• /
• pp.15-25
• /
• 2009

Donghae city is one of the most representative cement industrial city in Korea. The area is faced with the East Sea to the East and with high montane region of Tae-Back mountain range to the West. Many pollutant sources of air pollution are located near the coast, but the largest point sources of the region are located at the bottom of the mountain area in Donghae city. The local wind is highly affected by local topography and plays an important role in transport and dispersion of contaminants from the pollution sources. This study was designed to evaluate enhancement of MM5 predictions by using Four Dimensional Data Assimilation (FDDA), the SONDE data and the national meteorological station, data only. The alternative meteorological fields predicted with and without FDDA were used to simulate spatial and temporal variations of NOx in combined with Atmospheric Dispersion Models (CALPUFF). For the modeling domain, the alternative meteorological fields with 1.1 km spatial resolution were interpolated to the CALMET with 0.5 km resolution. The vertical layers set to have 35 and 12 layers for MM5 and CALPUFF, respectively. MM5 with the FDDA did not resulted in significant improvement of meteorological field prediction in Donghae region, which is primarily because of complex geography and wind scheme. The result of CALPUFF, however, showed reduction of uncertainty errors by using the interpolation scheme of the actual measurement data.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.4
• /
• pp.264-274
• /
• 2009

Concentration of Air Quality Models (CMAQ) has a deep connection with emissions and wind fields. In particular the wind field is highly affected by local topography and plays an important role in transport and dispersion of contaminants from the pollution sources. The purpose of this study is to examine the impact of interpolation on Air quality model. This study was designed to evaluate enhancement of MM5 and CMAQ predictions by using Four Dimensional Data Assimilation (FDDA), the SONDE data and the national meteorological station and the MODerate resolution Imaging Spectroradiometer (MODIS). The alternative meteorological fields predicted with and without MODIS data were used to simulate spatial and temporal variations of ozone in combined with CMAQ on June 2006. The result of this study indicated that data assimilation using MODIS data provided an attractive method for generating realistic meteorological fields and dispersion fields of ozone in the Korea peninsular, because MODIS data in 10 km domain are grid horizontally and vertically. In order to ensure the success of Air quality model, it is necessary to FDDA using MODIS data.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.559-561
• /
• 2008

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.149-150
• /
• 2008