• 제목/요약/키워드: FCN

검색결과 39건 처리시간 0.033초

그래핀/탄소나노튜브(FCN) 첨가에 따른 Polyamide-Nylon 6의 기계적 특성에 미치는 영향 (Effect of Adding Graphene/Carbon Nanotubes (FCN) on the Mechanical Properties of Polyamide-Nylon 6)

  • 여승준;신해름;노우승;김만태
    • 한국산업융합학회 논문집
    • /
    • 제26권6_3호
    • /
    • pp.1297-1303
    • /
    • 2023
  • Research on enhancing the mechanical strength, lightweight properties, electrical conductivity, and thermal conductivity of composite materials by incorporating nano-materials is actively underway. Thermoplastic resins can change their form under heat, making them highly processable and recyclable. In this study, Polyamide-Nylon 6 (PA6), a thermoplastic resin, was utilized, and as reinforcing agents, fused carbon nano-materials (FCN) formed by structurally combining Carbon Nanotube(CNT) and Graphene were employed. Nano-materials often face challenges related to cohesion and dispersion. To address this issue, Silane functional groups were introduced to enhance the dispersion of FCN in PA6. The manufacturing conditions for the composite materials involved determining the use of a dispersant and varying FCN content at 0.05 wt%, 0.1 wt%, and 0.2 wt%. Tensile strength measurements were conducted, and FE-SEM analysis was performed on fracture surfaces. As a result of the tensile strength test, it was confirmed that compared to pure PA6, the strength of the polymer composite with a content of 0.05 wt% was improved by about 60%, for 0.1 wt%, about 65%, and for 0.2 wt%, the strength was improved by 50%. Also, when compared according to the content of FCN, the best strength value was shown when 0.1 wt% was added. The elastic modulus also showed an improvement of about 15% in the case of surface treatment compared to the case without surface treatment, and an improvement of about 70% compared to pure PA6. Through FE-SEM, it was confirmed that the matrix material and silane-modified nanomaterial improved the dispersibility and bonding strength of the interface, helping to support the load evenly and enabling effective stress transfer.

Fully Convolutional Network 기반 관심 영역 검출 기법의 속도 개선 연구 (A Study on Improving Speed of Interesting Region Detection Based on Fully Convolutional Network)

  • 황현수;정진우;김용환;최윤식
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2018년도 하계학술대회
    • /
    • pp.322-325
    • /
    • 2018
  • 영상의 관심 영역 검출은 영상처리 및 컴퓨터 비전 응용 분야에서 꾸준하게 사용되고 있는 기법이다. 특히, 근래 심층신경망 연구의 급격한 발전에 힘입어 심층신경망을 이용한 관심 영역 검출 기법에 대한 연구가 활발하게 진행되고 있다. 한편 Fully Convolutional Network(이하 FCN)은 본래 심층 예측(Dense Prediction)을 통한 의미론적 영상 분할(Semantic Segmentation)을 수행하기 위해 제안된 심층신경망 구조이다. FCN을 영상의 관심 영역 검출에 활용하여도 기존 관심 영역 검출 기법과 비교하여 충분히 좋은 성능을 발휘할 수 있다. 그러나 FCN에 사용되는 convolution 층의 수가 많고, 이에 따른 가중치(weight)의 개수도 기하급수적으로 늘어나 검출에 필요한 시간 복잡도가 매우 크다는 문제점이 있다. 따라서 본 논문에서는 기존 FCN이 가진 검출 시간 복잡도의 문제점을 convolution 층의 가중치 관점에서 해결하고자 이를 조절하여 FCN의 관심 영역 검출 속도를 향상시키는 방법을 제안한다. 적절한 convolution 층의 가중치를 조절함으로써, MSRA10K 데이터셋 환경에서 검출 정확도를 크게 저하시키지 않고도 최대 약 20.5%만큼 검출 속도를 향상시킬 수 있었다.

  • PDF

자율주행 환경에서 이미지 객체 분할을 위한 강화된 DFCN 알고리즘 성능연구 (A Study on the Performance of Enhanced Deep Fully Convolutional Neural Network Algorithm for Image Object Segmentation in Autonomous Driving Environment)

  • 김영광;김진술
    • 스마트미디어저널
    • /
    • 제9권4호
    • /
    • pp.9-16
    • /
    • 2020
  • 최근 이미지 분할(Image Segmentation)에 관련되어 스마트 공장 산업과 의료 분야 등에 접목하려는 연구가 다수 진행되고 있다. 특히 딥러닝 알고리즘을 사용한 이미지 분할 시스템들은 대용량의 데이터를 높은 정확도로 학습할 만큼 발전되었다. 자율주행 분야에서도 이미지 분할을 이용하기 위해선 대용량의 데이터들에 대한 충분한 학습량이 필요하며, 실시간으로 운전자의 데이터를 처리하는 스트리밍 환경은 고속도로, 어린이보호구역 등으로 안전운행에 대한 정확도가 중요하다. 따라서 본 논문에서는 다양한 도로환경에 적용할 수 있는 기존 FCN(Fully Convoulutional Network) 알고리즘을 강화한 DFCN 알고리즘을 제안하였으며, DFCN 알고리즘의 성능이 FCN 알고리즘과 비교하여 손실 값 측면에서 1.3% 개선하였음을 증명하였으며, 기존 U-Net 알고리즘에 DFCN 알고리즘을 적용하여 이미지 내의 주파수의 정보를 유지하여 더 좋은 결과치를 도출함으로써 결과적으로 자율주행 환경에서 DFCN 알고리즘이 FCN 알고리즘보다 성능이 향상되었다는 것을 증명하였다.

Bayer 패턴의 de-mosaicing 과정에서 발생하는 색상잡음 제거를 위한 검열기반 적응적 평탄화 기법 (Adaptive Smoothing Algorithm Based on Censoring for Removing False Color Noise Caused by De-mosaicing on Bayer Pattern CFA)

  • 황성현;김채성;문지혜
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.403-406
    • /
    • 2005
  • The purpose of this paper is to propose ways to remove false color noise (FCN) generated during de-mosaicing on RGB Bayer pattern images. In case of images sensors adapting Bayer pattern color filters array (CFA), de-mosaicing is conducted to recover the RGB color data in single pixels. Here, FCN phenomena would occur where there is clearer silhouette or contrast of colors. The FCN phenomena found during de-mosaicking process appears locally in the edges inside the image and the proposed method of eliminating this is to convert RGB color space to YCbCr space to conduct smoothing process. Moreover, for edges where different colors come together, censoring based smoothing technique is proposed as a way to minimize color blurring effect.

  • PDF

인코더-디코더 사이의 특징 융합을 통한 멀티 모달 네트워크의 의미론적 분할 성능 향상 (Improved Semantic Segmentation in Multi-modal Network Using Encoder-Decoder Feature Fusion)

  • 손찬영;호요성
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2018년도 추계학술대회
    • /
    • pp.81-83
    • /
    • 2018
  • Fully Convolutional Network(FCN)은 기존의 방법보다 뛰어난 성능을 보였지만, FCN은 RGB 정보만을 사용하기 때문에 세밀한 예측이 필요한 장면에서는 다소 부족한 성능을 보였다. 이를 해결하기 위해 인코더-디코더 구조를 이용하여 RGB와 깊이의 멀티 모달을 활용하기 위한 FuseNet이 제안되었다. 하지만, FuseNet에서는 RGB와 깊이 브랜치 사이의 융합은 있지만, 인코더와 디코더 사이의 특징 지도를 융합하지 않는다. 본 논문에서는 FCN의 디코더 부분의 업샘플링 과정에서 이전 계층의 결과와 2배 업샘플링한 결과를 융합하는 스킵 레이어를 적용하여 FuseNet의 모달리티를 잘 활용하여 성능을 개선했다. 본 실험에서는 NYUDv2와 SUNRGBD 데이터 셋을 사용했으며, 전체 정확도는 각각 77%, 65%이고, 평균 IoU는 47.4%, 26.9%, 평균 정확도는 67.7%, 41%의 성능을 보였다.

  • PDF

A Deep Learning-Based Image Semantic Segmentation Algorithm

  • Chaoqun, Shen;Zhongliang, Sun
    • Journal of Information Processing Systems
    • /
    • 제19권1호
    • /
    • pp.98-108
    • /
    • 2023
  • This paper is an attempt to design segmentation method based on fully convolutional networks (FCN) and attention mechanism. The first five layers of the Visual Geometry Group (VGG) 16 network serve as the coding part in the semantic segmentation network structure with the convolutional layer used to replace pooling to reduce loss of image feature extraction information. The up-sampling and deconvolution unit of the FCN is then used as the decoding part in the semantic segmentation network. In the deconvolution process, the skip structure is used to fuse different levels of information and the attention mechanism is incorporated to reduce accuracy loss. Finally, the segmentation results are obtained through pixel layer classification. The results show that our method outperforms the comparison methods in mean pixel accuracy (MPA) and mean intersection over union (MIOU).

Surface Water Mapping of Remote Sensing Data Using Pre-Trained Fully Convolutional Network

  • Song, Ah Ram;Jung, Min Young;Kim, Yong Il
    • 한국측량학회지
    • /
    • 제36권5호
    • /
    • pp.423-432
    • /
    • 2018
  • Surface water mapping has been widely used in various remote sensing applications. Water indices have been commonly used to distinguish water bodies from land; however, determining the optimal threshold and discriminating water bodies from similar objects such as shadows and snow is difficult. Deep learning algorithms have greatly advanced image segmentation and classification. In particular, FCN (Fully Convolutional Network) is state-of-the-art in per-pixel image segmentation and are used in most benchmarks such as PASCAL VOC2012 and Microsoft COCO (Common Objects in Context). However, these data sets are designed for daily scenarios and a few studies have conducted on applications of FCN using large scale remotely sensed data set. This paper aims to fine-tune the pre-trained FCN network using the CRMS (Coastwide Reference Monitoring System) data set for surface water mapping. The CRMS provides color infrared aerial photos and ground truth maps for the monitoring and restoration of wetlands in Louisiana, USA. To effectively learn the characteristics of surface water, we used pre-trained the DeepWaterMap network, which classifies water, land, snow, ice, clouds, and shadows using Landsat satellite images. Furthermore, the DeepWaterMap network was fine-tuned for the CRMS data set using two classes: water and land. The fine-tuned network finally classifies surface water without any additional learning process. The experimental results show that the proposed method enables high-quality surface mapping from CRMS data set and show the suitability of pre-trained FCN networks using remote sensing data for surface water mapping.

R-FCN과 Transfer Learning 기법을 이용한 영상기반 건설 안전모 자동 탐지 (Image-Based Automatic Detection of Construction Helmets Using R-FCN and Transfer Learning)

  • 박상윤;윤상현;허준
    • 대한토목학회논문집
    • /
    • 제39권3호
    • /
    • pp.399-407
    • /
    • 2019
  • 대한민국에서 건설업은 타 업종들과 비교하여 안전사고의 위험성이 가장 높게 나타난다. 따라서 건설업 내 안전성 향상을 도모하기 위해 여러 연구가 예전부터 진행이 되어 왔고, 본 연구에선 건설현장 영상 데이터를 기반으로 물체 탐지 및 분류 알고리즘을 이용해서 효과적인 안전모 자동탐지 시스템을 구축하여 건설현장 노동자들의 안전성 향상에 기여하고자 한다. 본 연구에서 사용된 알고리즘은 Convolutional Neural Network (CNN) 기반의 물체 탐지 및 분류 알고리즘인 Region-based Fully Convolutional Networks (R-FCN)이고 이를 Transfer Learning 기법을 사용하여 딥러닝을 실시하였다. ImageNet에서 수집한 1089장의 사람과 안전모가 포함된 영상으로 학습을 시행하였고 그 결과, 사람과 안전모의 mean Average Precision (mAP)은 각각 0.86, 0.83로 측정되었다.

patterns and crust - mantle interactio

  • Du, Y.
    • 대한자원환경지질학회:학술대회논문집
    • /
    • 대한자원환경지질학회 2000년도 춘계 공동학술발표회
    • /
    • pp.110-110
    • /
    • 2000
  • Temporal and spatial distribution patterns of the magmatic rocks and associated ore deposits in the Mesozoic magmatic - metallogenic belt along the Yangtz River, Anhui Province are used to determine and discuss the crust - mantle interaction processes. The magmatic rocks are Cu - Au mineralized high - K calc - alkalic intermediate ¬acidic (CAK) and Fe - Cu mineralized high - Na alkalic - calc intermediate - basic intrusive rocks (FCN) in the central part of the belt and grade to Cu - Mo - Pb - Zn - Ag mineralized calc - alkalic granitoids (CMG) and A - type granites (AG) in the southern and northern parts of the belt. Samples from the CAK and CMG yield Rb - Sr isochron ages of 137 - 140Ma with $(^{87}Sr/^{86}Sr)_{o}$ = 0.7060 - 0.7101, while those from the FCN and AG yield the ages of 120 - 129Ma with $(^{87}Sr/^{86}Sr)_{o}$ = 0.7047 - 0.7077. The Sr isotope ratios, CriTh ratios 0.4 - 3.1), Eu/Eu* ratios < 0.79 - 1.05) and initial epsilon (Nd) values (-16.6 - -6.3) for the CAK and CMG are consistent with magma derivation from old metamorphic basement rocks rich in metallogenic elements through a two - stage process of mantle - derived magma underplating caused by primary lithosphere extension and subsequent partial melting. On the basis of Sr isotope data, CriTh ratios (3.4 - 13.8), Eu/Eu* ratios (0.86 - 1.13) and initial epsilon (Nd) values (-7.7 - +1.4), the FCN and AG are considered to be formed through syntexis with material input from the mantle that resulted from further lithosphere extension followed by mantle - derived magma underplating on a large scale.

  • PDF