• Journal of Ginseng Research
• /
• 제30권3호
• /
• pp.172-180
• /
• 2006

The purpose of this study is classifying types of American ginseng and estimating their production cost and revenue by the types. Usually, the American ginseng can be classified as 4 different types; wild ginseng(WG), wild simulated ginseng(WSG), woods grown ginseng(WGG), and field cultivated ginseng(FCG). This paper estimates costs and benefits for FCG, WGG, and WSG per acre. The WGG & WSG are produced under the tree at mountain while the FCG is produced at large scale farm with machinery. Annual profit for the FCG is $2,222 while that of the WGG and the WSG are $2,759 and $3,799 per acre. Although quantity produced per acre for the WGG and WSG(600lbs and 160lbs) are much smaller than that of the FCG(3,000lbs), prices per pound for the WGG and WSG($125, 375$) are higher than that of the FCG($24). In addition, production costs for the WGG and WSG are lower than that of the FCG because of the costs for seeds, shadow facility, and chemicals are different by the types of production.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2977-2981
• /
• 2021

Corrosion fatigue crack growth (FCG) behavior of 316LN stainless steel was investigated in high-temperature pressurized water at different temperatures, load ratios (R = K_max/K_min) and rise times (t_R). The environmental assisted effect on FCG rate was observed when both the R and t_R exceeded their critical values. The FCG rate showed a linear relation with stress intensity factor range (ΔK) in double logarithmic coordinate. The environmental assisted effect on FCG rate depended on the ΔK and quantitative relations were proposed. Possible mechanisms of environmental assisted FCG rate under different testing conditions are also discussed.

• 한국재료학회지
• /
• 제2권5호
• /
• pp.313-319
• /
• 1992

The mechanisms of fatigue crack growth (FCG) in a Ti$_3$Al-based (${\alpha}_2$) alloy, Ti-24Al-11Nb (a/o) with acicular microstructure were studied with particular attention focused on the fatigue crack path through the microstructure and on the effects of specimen orientation and crack closure. The results showed that the fatigue cracks of Ti-24Al-11Nb alloy grew much faster than conventional titanium alloys, with little difference in FCG rates for TL and TS orientations. The fatigue crack paths revealed crystallographic transgranular fracture with frequent serrations and branching. This is in agreement with the known effects of slip planarity and microstructure on the FCG behavior. The load-displacement hysteresis loops showed that the crack closure influenced the FCG behavior.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.167-172
• /
• 2008

This study is to evaluate the fatigue crack growth characteristics for base metals and welded metal of 9% Ni steels. Since this material has very excellent fracture toughness at low temperature, it has been widely used for inner walls of LNG storage tank. These materials to compare fatigue crack growth (FCG) behaviour are treated with heat by the method of quenching and tempering (QT), and quenching, lamellarizing and tempering (QLT). FCG tests using compact temsion (CT) specimen under stress ratio R=0.1, 0.5, and constant load are carried out. K-increasing tests are conducted by the standard test method described in ASTM E 647. To investigate the effect of welded metal on the crack growth rate, the locations of notch tip were chosen at the center of welded metal and heat affected zone (HAZ). Form the results, FCG rate has almost same tendency according to stress ratio, base and welded metal, the locations of welded metal. FCG rate of welded metal is somewhat faster than base metal. Also scanning electron microscope (SEM) is used to observe the striation of the fractured surface after fatigue crack tests.

• Mycobiology
• /
• 제42권2호
• /
• pp.147-151
• /
• 2014

We investigated the diversity of the foliar endophytes of Korean ginseng. Endophytic fungi were isolated from healthy leaves of mountain-cultivated ginseng (MCG) and field-cultivated ginseng (FCG) at 4 sites in Chungbuk Province. A total of 24 species of fungal endophytes were identified using molecular approaches. Additionally, the diversity of these endophytic fungi was compared between MCG and FCG. The major isolated endophytes were Edenia gomezpompae and Gibberella moniliformis in the MCG and FCG samples, respectively. The results suggest that ginseng endophytes have different community structures in different environments, and this understanding may prove useful in ginseng cultivation.

• 대한기계학회논문집A
• /
• 제39권1호
• /
• pp.27-35
• /
• 2015

본 연구에서는 피로 하중 및 크리프 하중을 받는 Mod.9Cr-1Mo (ASME Grade 91)강 시편에 대한 일련의 실험결과로부터 재료물성치인 고온 균열진전 모델을 개발하였다. 이 균열진전 모델은 크리프-피로하중을 받는 균열체의 결함평가에 사용되는 물성치이다. 한국원자력연구원이 수행한 일련의 피로 균열진전(FCG) 속도 실험 및 크리프 균열진전(CCG) 속도 실험 결과로부터 균열진전 모델을 결정하고, 이를 프랑스의 고온 설계 기술기준인 RCC-MRx 와 비교함으로써 설계 물성치의 보수성에 대해 검토하였다. RCC-MRx 는 FCG 모델 및 CCG 모델을 Section III Tome 6 에서 제공하고 있는데, 실험으로부터 결정한 균열진전 모델과 비교한 결과 RCC-MRx 의 FCG 모델은 보수적인 것으로 나타난 반면 CCG 모델은 비보수적인 것으로 나타나 동 물성치에 대한 검증이 필요한 것으로 나타났다. 또한 본 연구에서는 기계적 강도 및 크리프 시험결과에 대해서도 RCC-MRx 의 물성치와 비교 및 분석하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.43-47
• /
• 2000

When estimating fatigue crack growth (FCG) life of structures, the use of crack growth models and knowledge of the values of their corresponding parameters are of vital importance. Inconsistency in using models with appropriate parameters can lead to enormous errors in FCG life prediction. In this paper examples are analyzed and compared with test results to show the possible problems, Consistency checks are necessary for avoiding some pitfalls, and also necessary for verifying the correct performance and accuracy of the used computer program.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 춘계학술발표회
• /
• pp.5-5
• /
• 2018

Ginseng (Panax ginseng C.A. Meyer), one of the most widely used medicinal plants in traditional oriental medicine, is used for the treatment of various diseases. It has been classified according to its cultivation environment, such as field cultivated ginseng (FCG) and mountain cultivated ginseng (MCG). However, little is known about differences in gene expression in ginseng roots between field cultivated and mountain cultivated ginseng. In order to investigate the whole transcriptome landscape of ginseng, we employed High-Throughput sequencing technologies using the Illumina HiSeqTM2500 system, and generated a large amount of sequenced transcriptome from ginseng roots. Approximately 77 million and 87 million high-quality reads were produced in the FCG and MCG roots transcriptome analyses, respectively, and we obtained 256,032 assembled unigenes with an average length of 1,171 bp by de novo assembly methods. Functional annotations of the unigenes were performed using sequence similarity comparisons against the following databases: the non-redundant nucleotide database, the InterPro domains database, the Gene Ontology Consortium database, and the Kyoto Encyclopedia of Genes and Genomes pathway database. A total of 4,207 unigenes were assigned to specific metabolic pathways, and all of the known enzymes involved in starch and sucrose metabolism pathways were also identified in the KEGG library. This study indicated that alpha-glucan phosphorylase 1, putative pectinesterase/pectinesterase inhibitor 17, beta-amylase, and alpha-glucan phosphorylase isozyme H might be important factors involved in starch and sucrose metabolism between FCG and MCG in different environments.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5550-5558
• /
• 2015

최근 환경오염원의 배출이 적고, 에너지 효율이 높은 연료전지에 대한 관심이 높아지고 있으며, 특히 고온동작 연료전지의 경우 대용량 연료전지발전시스템(FCGS, Fuel Cell Generation System)으로 전력계통에 연계되고 있다. 그러나 대용량 FCGS는 계통의 각종외란(불평형전류, 고조파, 서지 등)에 의하여 보호기기의 오동작, 제어소자의 소손현상 및 제어신호 헌팅현상이 발생하여 이에 대한 대책이 요구되고 있는 실정이다. 따라서 본 논문에서는 전력분석장비를 이용하여 대용량 FCGS에서 발생하는 실 계통 문제점을 분석하고, PSCAD/EMTDC, ETAP, P-SIM 소프트웨어를 이용하여, FCGS설비 및 FCGS의 접지계통과 불평형전류, 고조파, 서지와 같은 계통외란현상의 모델링을 수행하였다. 또한, 각 계통외란에 대한 방지대책을 수립하기 위하여, 불평형전류를 줄이기 위한 중성점접지저항기(NGR, Neutral Ground Resister)운용알고리즘, 고조파를 기준 범위 이내로 줄이기 위한 고조파필터 설계알고리즘, 서지로부터 설비를 보호하기 위한 SPD(Surge Protective Device) 운용알고리즘, 적절한 접지계통을 적용하기 위한 접지계통 운용알고리즘을 제안하였다. 이를 검증하기 위하여 상기에서 제시한 모델링을 이용하여, FCGS의 주요 장해요인들을 모의한 결과, 본 논문에서 제안된 대용량 FCGS의 계통외란방지알고리즘의 유용성을 확인하였다.

• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.55-61
• /
• 2005

A fuel cell (FC) system includes a fuel processor plus subsystems to manage air, water, and thermal energy, and electric power. The overall system is high-priced and needs peripheral devices. In this paper, a FC simulator is designed and constructed with the electrical characteristics of a fuel cell generation (FCG) system, using uses a simple buck converter to overcome these disadvantages. The characteristic voltage and current (V-I) curve for the FC simulator is controlled by a simplified linear function. In addition, to verify FCG system performance and operation, a full-bridge DC/DC converter and a single-phase DC/AC inverter were designed and constructed for FC applications. Close agreement between the simulation and experimental results confirms the validity and usefulness of the proposed FC simulator.