• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.81-86
• /
• 2011

The aqueous solution of Sunset Yellow-FCF (SY-FCF) began to show schlieren texture at room temperature when its concentration reaches 25 wt%. A further increase of the concentration of SY-FCF to 28 wt% resulted in a perfect nematic liquid crystal phase. However, more than 30 wt% of SY-FCF in aqueous solution was required to make an optically anisotropic film simply by shear coating. In our study, concentration of SY-FCF solution, coating speed, drying temperature, and relative humidity were considered as coating parameters affecting the preparation of optically anisotropic thin films. From analysis of variance analysis (ANOVA), the solution concentration was revealed as a main factor affecting the film thickness. The drying temperature and solution concentration were main factors affecting the transmittance of parallel direction ($T_o$). Especially, SY-FCF aqueous solution with high concentration induced a better alignment of LC columns and produced highly oriented anisotropic films. In this study, optically anisotropic films prepared by 33 wt% of SY-FCF in aqueous solution showed 89.7~98.7% of degree of polarization.

• Journal of Environmental Science International
• /
• v.13 no.6
• /
• pp.599-603
• /
• 2004

In a batch reactor, the characteristics of photocatalytic degradation of brilliant blue FCF in titanium dioxide suspension was studied under the irradiation of ultra-violet ray. Photocatalytic degradation in anatase type of TiO$_2$ was more effective than in rutile type of $TiO_2$ below the dosage of 5g. The degradation rate was slightly increased with decreasing initial pH of brilliant blue FCF aqueous solution, but rapidly increased with the addition of oxidant. Potassium bromate acted as more effective oxidant than ammonium persulfate. The photocatalytic degradation rate of brilliant blue FCF was pseudo-first order with rate constants of 0.012, 0.006 and $0.003min^{-1}$ at initial pH 3.1, 5.2 and 7.1 of brilliant blue FCF solution, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.11
• /
• pp.1705-1712
• /
• 2007

The effect of different tropical feed sources on rumen ecology, cellulolytic bacteria, feed intake and digestibility of beef cattle was investigated. Four fistulated, castrated male crossbred cattle were randomly allocated to a $4{\times}4$ Latin square design. The treatments were: T1) urea-treated (5%) rice straw (UTS); T2) cassava hay (CH); T3) fresh cassava foliage (FCF); T4) UTS:FCF (1:1 dry matter basis). Animals were fed concentrates at 0.3% of body weight on a DM basis and their respective diets on an ad libitum basis. The experimental period was 21 days. The results revealed that the use of UTS, CH, FCF and UTS:FCF as roughage sources could provide effective fiber and maintain an optimal range of ruminal pH and $NH_3-N$. Total viable and cellulolytic bacterial populations were enhanced (p<0.05) with UTS as the roughage source. Animals fed FCF had a higher rumen propionate production (p<0.05) with a lower cellulolytic bacteria count. Moreover, three predominant cellulolytic bacteria species, namely Fibrobacter succinogenes, Ruminococcus albus and Ruminococcus flavefaciens, were found in all treatment groups. Roughage intake and total DM intake were highest with UTS (2.2 and 2.5% BW, respectively) as the roughage source (p<0.05). Nutrient intake in terms of organic matter intake (OMI) was similar in UTS, CH and UTS:FCF treatments (8.0, 6.8 and 8.7 kg/d, respectively), while crude protein intake (CPI) was enhanced in CH, FCF and UTS:FCF as compared to the UTS treatment (p<0.05). Digestion coefficients of DM and organic matter (OM) were similar among treatments, while the CP digestion coefficients were similar in CH, FCF and UTS:FCF treatments, but were higher (p<0.05) in CH than in UTS. CP and ADF digestible intakes (kg/d) were highest (p<0.05) on the CH and UTS treatments, respectively. It was also observed that feeding FCF as a full-feed resulted in ataxia as well as frequent urination; therefore, FCF should only be fed fresh as part of the feed or be fed wilted. Hence, combined use of FCF and UTS as well as CH and FCF were recommended.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.174-181
• /
• 2012

In this paper, the Flow Control Fin(FCF) optimization has been carried out using computational fluid dynamics(CFD) techniques. This study focused on evaluation for the performance of the FCF attached in the stern part of the ship. The main advantage of FCF is to enhance the resistance performance through the lift generation with a forward force component on the foil section, and the propulsive performance by the uniformity of velocity distribution on the propeller plane. This study intended to evaluate these functions and to find optimized FCF form for minimizing viscous resistance and equalizing wake distribution. Four parameters of FCF are used in the study, which were angle and position of FCF, longitudinal location, transverse location, and span length in the optimization process. KRISO 300K VLCC2(KVLCC2) was chosen for an example ship to demonstrate FCF for optimization. The optimization procedure utilized genetic algorithms (GAs), a gradient-based optimizer for the refinement of the solution, and Non-dominated Sorting GA-II(NSGA-II) for Multiobjective Optimization. The results showed that the optimized FCF could enhance the uniformity of wake distribution at the expense of viscous resistance.

• Journal of Environmental Health Sciences
• /
• v.4 no.1
• /
• pp.10-12
• /
• 1977

A study was carried out to detect of illegal artificial dyes and to confirm the used rate of illegal dyes in the production process of commercial jellys by thindayer chromatography and paper chromatography, from March, 1976 to July, 1976. The following conclusions were obtained 1. Seperated dyes were amaranth, erythrosin, tatrazin, sunset yellow FCF, fight green SF yellowish, fast green FCF and the most frequent use of amaranth. 2. Used rate of legal dyes were 94.12% (96 samples) and illegal dyes were 5.88% (6 samples) with samples 102. 3. The average Rf value of T.L.C. were amaranth (0.92), erythrosin (0.48), tatrazin (0.83), sunset yellow FCF(0.86), fast green FCF (0.63), light green SF yellowish (0.23) and paper chromatography were amaranth (0.76), erythrosin (0.44), tatrazin(0.75), sunset yellow FCF (0.76), fast green FCF (0.86), light green SF yellowish(0.52).

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.55-63
• /
• 2008

Fine blanking is a process of press shearing which makes it possible to produce the thick sheet metal of the finished surface and the close dimensional accuracy over the whole material thickness in the single blanking operation. In this paper, a plate holder of automotive seat recliner is manufactured by FCF(Flow Control Forming) method using the conventional mechanical press instead of the fine blanking press. Main processes for manufacturing of the plate holder by FCF method are embossing, half blanking and trimming processes. Optimal clearance, stripper force and counter force to increase the dimensional accuracy of the plate holder have been investigated by FE-analysis. As a result of FE-analysis, the clearance for both embossing and half blanking processes was -2%t and the forces of stripper and counter were 25ton and 15ton, respectively. After manufacturing the plate holder by FCF method, the measured dimensional characteristics have been compared with the required specifications as the final product. Although the dimensional accuracy of the plate holder manufactured by FCF method was a little inferior to that by fine blanking process, it was satisfactory in a general sense.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.510-521
• /
• 2020

Recently, transparency in accounting for medical institutions has been emphasized. However, due to the current system problems and structural limitations, there is a lack of diagnosis on the financial status of domestic hospitals. This study is based on the financial statements per 100 beds of 374 including domestic hospital level to tertiary hospital, and analyzed the Free Cash Flow(FCF) by hospital size from the perspective of Free Cash Flow Hypothesis. After deriving Operating Cash Flow(OCF) through the profit or loss statement of medical institutions, FCFs were analyzed through the prior and current financial statements and OCFs, and the correlation between financial variables was confirmed. According to the analysis, first, hospitals with 160 to 299 beds and 300 beds or more have relatively high FCFs. Second, certified tertiary hospitals, hospitals with less than 160 beds, and general hospitals have negative(-) FCFs. Thus, there's a need to narrow the FCF gap based on the size of the hospital, maintaining an appropriate level of FCF. This study is meaningful in that it was the first FCF analysis based on hospital size. This study is also expected to offer an informative resources in setting differentiated strategies according to the size of medical institutions when establishing new accounting policies in the future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.55-59
• /
• 2014

This study investigated the improvement effects of fermented chicory fiber (FCF) on the intestinal function and constipation. The condition of fermentation was Bifidobacterium thermophilum added into chicory fiber (CF) flour suspension with the range of a 1% before incubation at $37^{\circ}C$ for 48 hr. The intestinal improvement effect of FCF was measured by the charcoal meal transit method in Balb/c mice. The intestinal transit with FCF at a dose of 1.62 mg/g was significantly increased to 88% compared with the CF group (P<0.01). Further, the constipation relief effect was investigated in Sprague-Dawley rats with loperamide-induced constipation. After oral administration of FCF 2.06 mg/g was remarkably decreased to 75% in fecal output compared with CF group (P<0.01). These findings indicated that FCF was more effective than CF for the intestinal function and constipation.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.152-156
• /
• 2016

Experimental research on the preparation of photocatalyst for the decomposition of brilliant blue FCF ($C_{37}H_{31}O_9N_2S_3Na_2$) was performed. $TiO_2$ and ZnO powders were prepared from titanium (IV) sulfate and zinc acetate at low reaction temperature and atmospheric pressure by hydrothermal precipitation method without calcination. In addition, $TiO_2$ was prepared with cationic surfactant CTAB (Hexadecyltrimethyl ammonium bromide) at the same conditions. The physical properties of prepared $TiO_2$ and ZnO, such as crystallinity, average particle size and absorbance, were investigated by XRD, Zeta-potential meter and DRS. And, the photocatalytic degradation of brilliant blue FCF has been studied in the batch reactor under UV radiation. For the photocatalysts prepared without CTAB, $TiO_2$ has smaller particle size and larger absorbance and photocatalytic reaction rate than ZnO. And $TiO_2$, prepared with CTAB whose concentration is 1/10 of that of precursor, shows 15% higher than that prepared without CTAB in final photocatalytic degradation ratio of brilliant blue FCF.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.309-314
• /
• 2015

Adsorption of brilliant blue FCF dye from aqueous solution using coconut shell based activated carbon was investigated. Batch experiments were carried out as function of adsorbent dose, initial concentration, contact time and temperature. The equilibrium adsorption data were analyzed by Langmuir and Freundlich model. The results indicate that Freundlich model provides the best correlation of the experimental data. Base on the estimated Freundlich constant (1/n=0.129~0.212), this process could be employed as effective treatment method. Adsorption kinetics experimental data were modeled using the pseudo-first-order and pseudo-second-order kinetic equation. It was shown that pseudo-second-order kinetic equation could best describe the adsorption kinetics. Base on the negative Gibbs free energy value (-4.81~-10.33 kJ/mol) and positive enthalpy value (+78.59 kJ/mol) indicate that the adsorption is spontaneous and endothermic process.