• Journal of KIISE
• /
• v.43 no.5
• /
• pp.569-578
• /
• 2016

The PLC (Programmable Logic Controller) has been widely used for the development of digital control system of nuclear power plant. The PLC has high maintenance costs and increasing complexity, hence, FPGA (Field Programmable Gate Array) based digital control system has been considered as an alternative. However, the development of FPGA based digital control system is a challenge for PLC engineers because they are required to learn about new language to develop FPGA and knowledge and know-how acquired in the development of PLC is not transferable. In this study, we proposed and implemented an automatic translation tool for translation of FBD (Function Block Diagram), a programming language of PLC software, into VHDL (VHSIC Hardware Description Language). Automatically translating the FBD to VHDL using this tool allows PLC engineers to develop FPGA without any knowledge of the hardware description language.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.581-587
• /
• 1997

For bifidus fermentation food, gelatinized rice solution was fermented without liquefaction/saccharification by amylolytic Bifidobacterium spp. isolated from Korean. Eighteen amylolytic Bifidobcterium on the starch agar were isolated from 38 Korean and four strains were finally selected as good amylase producers. The most enzyme-producing strain of Bif. sp. FBD-12 secreted extracellular amylase of 0.17 U/mg and intracelluar amylase of 1.8 U/mg. Three strains of Bif. sp. FBD-12, Bif. sp. FBD-16 and Bif. sp. FBD-17 also showed good growth on pH controlled media by HCI/acetic acid to pH 5.0 while Bif. sp. FBD-6 was not so tolerant that viable cell counts reduced to $10^2\;CFU/mL$ times on the media. Initial cell number of $10^6\;CFU/mL$ for those strains reached to $10^9\;CFU/mL$ on the rice medium supplemented with yeast extract (0.2%) and cysteine (0.05%). Ascorbic acid instead of cysteine was added to the medium for improving off-flavour and the best growth was shown at 0.1% addition. Isolated soybean proteins (ISP) of 3% accelerated the growth of the strains. Maximum count of $10^9\;CFU/mL$ reached within 12 hour fermentation on the rice medium with ascorbic acid and isolated soybean protein instead of 32 hours on the cysteine medium, and total acidity increased from 0.5% to 1% on each media. Reducing sugar in the ascorbic acid/ISP cultures generally increased especially 2 mg/mL to 15.5 mg/mL for Bif. sp. FBD-6. From sensory evaluation, the products showed good acceptability so that it suggested possibility of development of bifidus-fermented rice food.

• Microbiology and Biotechnology Letters
• /
• v.27 no.4
• /
• pp.333-338
• /
• 1999

This study was aimed to develop a value-added fermented products from rice and apple pomace using Bifidobacterium fermentation. The Bifidobacterium fermentation system of the mixture of rice and apple pomace was developed, and the physicochemical properties of the products were investigated. After 4 different bifidobacteria were compared for their fermentation capability and sensory properties of the fermented product, Bifidobacterium FBD-13 and FBD-22 were selected as appropriate strains for the fermentation of saccharified rice solution(SRS). The optimum inoculation level was 2% and the optimum fermentation time was 42 hrs. When wet apple pomace(WAP) was added to SRS, it contributed to the improvement of sensory properties of the fermented products and the optimum mixing ratio was 40% WAP and 60% SRS in weight. For the fermentation of the mixture of WAP and SRS, Bifidobacterium FBD-27 and FBD-22 were selected as suitable strains.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.763-766
• /
• 2003

산업 분야에서 자동화 시스템은 제품의 자동설계, 생산 공정의 자동제어, 장애의 발견과 복구, 품질 검사 등 각종 생산과 관련되어 생산성을 향상시킨다. 자동화 시스템을 구성하는 제어 시스템에 사용되는 흐름 제어 언어에는 IL, ST, FBD, SFC, LD의 5종이 있다. 일반적인 소프트웨어에서 동시에 사용할 수 있는 흐름 제어 언어의 종류는 2종 이하로 제한되어 있다. 이에 본 논문에서는 그래픽 기반의 흐름 제어 언어인 FBD, LD, SFC의 3종을 통합하여 처리가 가능한 소프트웨어를 제시한다. 그래픽 기반의 흐름 제어 언어인 FBD, LD, SFC의 형식을 모두 포함하는 데이터 구조를 설계하고, 데이터 구조로부터 읽어 들인 데이터를 출력하는 그래픽 처리 방안을 제시한다. 소프트웨어에서 편집한 FBD LD, SFC는 파일 단위로 관리할 수 있고, 각 파일들은 프로젝트 파일로 통합하여 관리가 가능하다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.427-429
• /
• 2005

원자력 발전소의 제어 시스템은 safety-critical 소프트웨어로서 안정성이 중요시되는 시스템이다. 최근 기존의 시스템이 PLC 기반의 디지털 제어장치로 대체되면서 이에 사용되는 소프트웨어의 안정성과 품질을 보장하기 위한 정형검증 기법이 요구되고 있다. 특히 PLC 프로그램의 설계에 사용되는 FBD의 모델체킹을 통한 정형검증에 대한 연구는 미비한 수준이다. VIS 검증기는 위의 요구에 부합하는 도구로서 이를 사용하면 여러 종류의 정형 검증이 가능하다. 본 논문에서는 VIS를 이용한 FBD의 검증을 위해서 FBD를 Verilog로 변환 하는 기법을 제안한다. 제안하는 방법의 효율성을 검증하기 위해서 현재 KNICS 사업단에서 개발중인 APR-1400용 원자로 보호 시스템의 운전정지회로를 예로 사용하였다.

• KIISE Transactions on Computing Practices
• /
• v.22 no.3
• /
• pp.145-150
• /
• 2016

Finding the exact location of faults in a program requires enormous time and effort. Several fault localization methods based on control flows of a program have been studied for decades. Unfortunately, these methods are not applicable to programs based on data-flow languages. A recently proposed mutation-based fault localization method is applicable to data-flow languages, as well as control-flow languages. However, there are no studies on the effectiveness of the mutation-based fault localization method for data-flow based programs. In this paper, we provided an experimental case study to evaluate the effectiveness of mutation-based fault localization on programs implemented in Function Block Diagram (FBD), a widely used data-flow based language in safety-critical systems implementation. We analyzed several real faults in the implementation of FBD programs of a nuclear reactor protection system, and evaluated the mutation-based fault localization effectiveness for each fault.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.699-714
• /
• 2020

Force based design (FBD) approach is prevalent in most of the national seismic design codes world over. Direct displacement based design (DDBD) and energy based design (EBD) approaches are relatively new methods of seismic design which claims to be more rational and predictive than the FBD. These three design approaches are conceptually distinct and imparts different strength, stiffness and ductility property to structural members for same plan configuration. In present study behavioural assessment of frame of six storey RC building designed using FBD, DDBD and EBD approaches has been performed. Lateral storey forces distribution, reinforcement design and results of nonlinear performance using static and dynamic methods have been compared. For the three approaches, considerable difference in lateral storey forces distribution and reinforcement design has been observed. Nonlinear pushover analysis and time history analysis results show that in FBD frame plastic deformation is concentrated in the lower storey, in EBD frame large plastic deformation is concentrated in the middle storeys though the inelastic hinges are well distributed over the height and, in DDBD frame plastic deformation is approximately uniform over the height. Overall the six storey frame designed using DDBD approach seems to be more rational than the other two methods.

• Advances in Computational Design
• /
• v.2 no.1
• /
• pp.15-28
• /
• 2017

One of the major developments in seismic design over the past few decades is the increased emphasis for limit states design now generally termed as Performance Based Engineering. Performance Based Seismic Design (PBSD) uses Displacement Based Design (DBD) methodology wherein structures are designed for a target level of displacement rather than Force Based Design (FBD) methodology where force or strength aspect is being used. Indian codes still follow FBD methodology compared to other modern codes like CalTrans, which follow DBD methodology. Hence in the present study, a detailed review of the two most common design methodologies i.e., FBD and DBD is presented. A critical evaluation of both these methodologies by comparing the seismic performance of bridge models designed using them highlight the importance of adopting DBD techniques in Indian Standards also. The inherent discrepancy associated with FBD in achieving 'seismic regularity' is highlighted by assessing the seismic performance of bridges with varied relative height ratios. The study also encompasses a brief comparison of the seismic design and detailing provisions of IRC 112 (2011), IRC 21 (2000), AASHTO LRFD (2012) and CalTrans (2013) to evaluate the discrepancies on the same in the Indian Standards. Based on the seismic performance evaluation and literature review a need for increasing the minimum longitudinal reinforcement percentage stipulated by IRC 112 (2011) for bridge columns is found necessary.

• Journal of Internet Computing and Services
• /
• v.7 no.4
• /
• pp.57-66
• /
• 2006

In this paper, I propose a new method of Multi-Pulse Speech Coding(FBD-MPC: Frequency Band Division MPC) by using TSIUVC(Transition Segment Including UnVoiced Consonant) searching, extraction and approximation-synthesis method in a frequency domain. As, a result. the extraction rates of TSIUVC are 84.8%(plosive), 94.9%(fricative) and 92.3%(affricative) in female voice, 88%(plosive), 94.9%(fricative) and 92.3%(affricative) in male voice respectively. Also, I obtain a high quality approximation-synthesis waveforms within TSIUVC by using frequency information of 0.547kHz below and 2.813kHz above. I evaluate MPC by using switching information of voiced/unvoiced and FBD-MPC by using switching information of voiced/Silence/TSIUVC. As, a result, I knew that synthesis speech of FBD-MPC was better in speech quality than synthesis speech of the MPC.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.415-422
• /
• 2004

Automation systems improve the productivity of works which relate to product design, facilities management, fault processing and quality evaluation. In these systems, the description language for monitoring and control process is called new control language. These are five flow control languages : IL, ST, FBD, SFC and LD. IL and ST are based on left form. FBD, SFC and LD are based on graphic form. Generally, a software which monitors and controls a system is allowed to use just one flow control language. It is impossible to use more than two languages for simulation in the same system environment. In this paper, we analyzed the characteristics of flow control languages and the process of programming in the legacy system. In addition, for the Integrated processing of languages, we propose Extended ST based on the high-level ST language. Based on this research, we implement a graphical language editor and EST-IL convertor. The graphical language editor makes sequence rules, and converts graphical language into EST. EST-IL convertor has a function to convert EST into IL which is similar to assembly language. As the result of this paper, we present a scheme which integrates all the flow control language processing based on IL.