• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.791-802
• /
• 1998

The purpose of this study was to obtain the angulation and inclination of FACC of all teeth to FH plane. Study models of 31 persons with normal occlusion were selected and mounted on the semiadjustable articulator for this study. Using T.A.R.G. with a little modified method, the angulation and inclination of FACC of all teeth to FH plane were measured and then the measurements were analyzed statistically. The obtained results were as follows. Mean, standard deviation, maximum value, and minimum value of the angulation and inclination of FACC of upper and lower teeth were obtained. $\cdot$The FACC in both upper and lower arch was progressively lingually-inclined from anterior teeth to posterior teeth. $\cdot$In the angulations of FACC of upper teeth, central and lateral incisor showed similar value. Yet, the FACC of the rest was progressively distally-angulated from the canine to posterior teeth. The FACC in lower arch was progressively mesially-angulated from anterior teeth to posterior teeth. $\cdot$The angulation and inclination of FACC of any tooth in both upper and lower teeth correlated strongly and positively with the angulation and inclination of FACC of adjacent tooth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2289-2297
• /
• 2014

There were a lot of attempts in the army to use various domestic thematic maps, but attribute data types of military topographic analysis maps use the FACC of DIGEST, so there is a limit in employing domestic thematic maps with different types of attribute codes. Therefore, this study analyzed the FACC as a data attribute based on the MIL-PRF-89040 of the US Army. Then, VITD was created by changing the attribute codes of domestic thematic maps produced in Korea to fit the FACC. Lastly, it was applied to the analysis of cross-country movement for maneuver defined in FM 5-33 in order to verify if it is applicable in practice. As a result, it was found that the suggested method was helpful in securing the cross-country movement for maneuver. This means that this method can be used not only in producing military topographic analysis maps using domestic thematic maps but in constructing emergency transport routes roads to transport by-products of forest in future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.147-155
• /
• 2010

Landcover information of access-denied area was extracted from low-medium and high resolution satellite image. Training for supervised classification was performed to refer visually by landcover map which is made and distributed from The Ministry of Environment. The classification result was compared by relating data of FACC land classification system. As we rasterize digital military map with same pixel size of satellite classification, the accuracy test was performed by image to image method. In vegetation case, ancillary data such as NDVI and image for seasons are going to improve accuracy. FACC code of FDB need to recognize the properties which can be automated.

• Korean Circulation Journal
• /
• v.52 no.8
• /
• pp.635-637
• /
• 2022

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.275-291
• /
• 2002

Of various factors indicated for effective use of straight wire appliances, there was a great lack of studies both domestic and international about the curvatures of tooth crowns. This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth. For this study, three-dimensional laser scanning was performed on 36 dental casts with normal anatomic structures. Andrews plane and Facial axis of clinical crown (FACC) were designated as horizontal and vertical reference planes respectively. 2 or 3 lines, 1mm apart, were drawn superior, inferior, left and right of these reference planes. A three-dimensional coordinate table was made for points formed by crossing these lines, and averages of each coordinate point on the 36 dental casts were obtained. The curvature equation was made using three-dimensional coordinate points (x,y,z) and by this curvature equation, the curve ratio of each tooth was obtained. Curve ratio changes of each section of teeth were calculated by curve ratios of simplified curves. These two dimensional curves were simplified horizontally and vertically Conclusions for this study are as follows. 1. The basic data of labial and buccal clinical crown curvatures were obtained about Korean permanent teeth. 2. No significant difference was found between male and females. 3. Individual tooth characteristics 1) In maxillary central incisors, the difference in the curve ratio between the gingival and incisal sides was greater than for the other teeth. And the gingival side showed a greater curve ratio. 2) Maxillary canines showed more curvatures in the mesio-occlusal surface than the other surfaces. 3) In maxillary $1^{st}$ premolars, more curvatures were found in mesio-occlusal and disto-gingival surface, thus showing a twisted crown surface, but in maxillary $2^{nd}$ premolars, the crown curvatures of mesial and distal ends became parallel to each other. 4) No significant difference in crown curvatures was found between mandibular central and lateral incisors. 5) Occluso-gingival curvatures of mandibular$2^{nd}$ premolar turned out to be more rounded than mandibular $1^{st}$ premolars or maxillary $2^{nd}$ premolars. From the above conclusions, it can be deduced that the same bracket bases can be used for mandibular central and lateral incisors. But for maxillary $1^{st}\;and\;2^{nd}$ premolars and for mandibular $1^{st}\;and\;2^{nd}$ premolars, because crown curvatures showed significant differences, when making bracket bases there is ample reason to make bracket base curves differently for each type of tooth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.384-386
• /
• 2014

As the type of property data of military terrain analysis map is using FACC of DIGEST, there is a limitation in utilizing a domestic thematic map which is in use of other type of property data. However, even though the attempts to utilize the domestic thematic map are made at military sites, the study has not been conducted enough. Therefore, we defined it by matching the property data necessary for the military terrain analysis cartography and property of the domestic thematic map, and analyzed in accordance with the method to analyze the cross-country movement roads specified in FM 5-33. But, there was no data for the diameter of trees in the vegetation map among a terrain analysis map, whereas there being data for the sort of trees. As the diameter of trees can be broken through to the extent of certain diameters by tracked vehicles, they are the factors necessary in analyzing. In this study, the research was conducted focusing on calculating the diameters for some trees described in a stand yield table by using the age-class for trees in a forest floor map with a scale of 1:5000 and calculating the diameters of trees by using the diameter-class for the diameters of other trees.

• The Journal of Fisheries Business Administration
• /
• v.45 no.3
• /
• pp.1-17
• /
• 2014

The objective of this study is to investigate consumer preferences, perception and consumption patterns for fish products. To investigate the difference in consumer responses according to the characteristics of the population parameters, data were collected from the survey of 404 Koreans and analyzed. The results are as follows: First, the differences of age; for the question of the reason why do you eat fish products, the younger generation (20~30s)'s most answer was 'The Taste' while the older age groups(40~50s and over 60s)' most respond was 'For Health'. Second, the differences of sex; women relatively considered 'The Quality' of fish products more important than men when selecting the products. Whereas, men thought 'The Taste' of fish products more important than women when they choose fish products. In addition, when the bad news or hygiene accidents about fish products are reported on media, women reacted more negatively for fish products purchase than men. Third, the differences of family members; the respondents who lived with 3 or more family members showed higher preference rates about purchasing trimmed fresh fish at the store than respondents who lived with 2 or less family members. On the other hand, single households relatively bought processed fish products and RTE(Ready To Eat) fish products more than other family member groups. In addition, single households preference rates about eating fish products as a main dish were very high compared to other groups.

• Journal of Sasang Constitutional Medicine
• /
• v.8 no.1
• /
• pp.101-186
• /
• 1996

The clinical application of constitutional Diagnosis is the most important part of Sasang constitutional medicine. It has been studied in various way. However, the study of morphologic characteristics on the face is applied for the first time. For quantitative analysis of the correlation between the sasang constitution and the shape of the face, the head-facial part of 170 cases were measured by Martin's measurement and analysis of a) the measurement value of height and the component ratio from the Gnathion to each part of face by constitution. b) the measurement value of depth and the component ratio from T-projected to each part of the face by constitution. c) the measurement value of breadth and component ratio between each parts of the facial breadth by constitution. d) the ratio of square on every part of face by constitution. e) the characteristics on each part of the face by constitution. f) the contour line of the forehead. g) the result of discriminant analysis about the constitution. Authors obtained the results from the study as follows; 1. The characteristics of Taeum-IN (1) The measurement value of Height, Breadth, T-Projected had a tendency to maximum value in general. (2) The value of lower opthal height and the square of lower opthal part was maximum. (3) The value of Pronasal T-projected length and Subnasal T-projected length was minimum, so Taeum-In has characteristics of depression in middle face, nasal part. (4) In the ratio of Breadth, T-Projected, T-Projected was minimum. (5) It was maximum that the square of nose, Alare, Middle face, Lower face and it was minimum that the square of eye. The square of nose, Alare, Middle facc, Lower face was maximum and the square of eye was minimum. (6) The curvature of the eyebrow was minimum. (7) The projection of jaw (Pogonion T-projection length) was maximum. (8) The breadth of eye was minimum. (9) There was a tendency that the projection of the forehead to the right in general. 2. The characteristics of Soeum-In (1) In all cases of projected length the measurement value was minimum. (2) The value of lower opthal height and the square of lower opthal part was minimum. (3) By the Pupulare T-projected length, the value of Pronasal T-projected length and Subnasal T-projected length was minimum, so the Soeum In's face shape is flat. (4) The square of eye, mouth, forehead was maximum and the square of nose, Alare, Middle face, Lower face was minimum. (5) The curvature of the eyebrow was maximum. (6) The projection of mouth was minimum. (7) The jaw was flat. (8) The breadth of eye was maximum. (9) There was a tendency that the projection of the forehead to the left in general. 3. The characteristics of Soyang-In. (1) In most cases of 고경 length the measurement value was minimum. (2) By the Pupulare T-projected length, each ratio of projected length was maximum, so the Soyang-In's face shape has many protrusions (3) In the ratio of Breadth, T-Projected, T-Projected was maximum. (4) The square of mouth was minimum. (5) The inclination of the forehead was minimum. (6) The projection of mouth was maximum. (7) The breadth of eye was minimum. (8) There was a tendency that the projection of the forehead to the left in general. (9) The middle face was protruded. 4. Discriminant about the constitution. According to the result of discriminant, the accuracy probability of discriminant was 85.58% in total and Taeum-In was 90.5%, Soeum-In was 70.8%, Soyang-In was 89.5%. The accuracy probability of discriminant about 3 constitutional group increased by 49.03% than the accident probility 36.55% 5. Suggestion (1) The study which gather and analysis the data should be continued. (2) The study which subdivide the characteristics of each part of the face by the constitution should be continued. (3) The analysis method about Moire should be supplement. (4) The study about the morphologic characteristics of the whole body should be continued. (5) Computer program of constitution diagnosis should be developed. (6) To increase utility of this method, the measurement should be automation.