• International Journal of Computer Science & Network Security
• /
• v.23 no.6
• /
• pp.147-154
• /
• 2023

Network intrusion refers to any unauthorized penetration or activity on a computer network. This upsets the confidentiality, integrity, and availability of the network system. One of the major threats to any system's availability is a Denial-of-Service (DoS) attack, which is intended to deny a legitimate user access to resources. Therefore, due to the complexity of DoS attacks, it is increasingly important to abstract and describe these attacks in a way that will be effectively detected. The automaton theory is used in this paper to implement a SYN Flood detection system based on Time-Dependent Finite Automata (TDFA).

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.231-239
• /
• 2004

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only in production and maintenance but also in related industrial productivity. This paper presents the study of equipment reliability improvement for rotary-machine vibration analysis. Based on these analyses, the maintenance management information system, and the machinery condition diagnosis technique are studied by using of the real-time diagnostic. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.439-442
• /
• 2004

This paper described a dc power system, which can generate the excessive do power form do bus line to ac source in substation for traction system. The proposed regeneration inverter system for dc traction can be used as both an inverter and an active power filter(APF). As a regeneration inverter mode, it can recycle regenerative energy caused by decelerating tractions and as an active power filter mode, it can compensate for harmonic distortion produced by the rectifier substation.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1013-1016
• /
• 2000

In this study, the estimate speed of rotor in the induction motor with Model Reference Adaptive control System (MARC) principle and to study that vector control system feedbacks speed estimated to speed control system and its result is as follows; Considering with explanation an influence of speed estimation mechanism depend on error about the second resistance size established, it estimates the deviation of the second resistance establishment and exhibits a compensation method, what is more, it designs a reparation program using the fuzzy algorithm and testifies the result with the computer simulation. And besides, it composes the load torque estimation and estimates the load torque, as the result, feedback-compensating the result of estimation, it improves the efficiency. In consequence, it makes a good result for more powerful vector control system about the outside trouble.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1211-1214
• /
• 1992

AC servo motor drives, Fara DS series, proposed in this paper can be effectively used in robots, CNC machine tools, and FA system with AC servo motors as actuators. The inverter of the AC servo drive consists of IGBT (Insulated Gate Bipolar Transistor) which have high switching frequency. Noises and vibrations generated in variable speed control of AC servo motors can be greatly reduced due to their high switching frequencies. In the developed servo drive, maximum torque is always generated in the whole speed range by compensating phase shift, which results from the nonlinearies of the AC servo motor during abrupt acceleration and deceleration. Abundant protection functions are provided to prevent abnormal state of the servo motor, and furthermore diverse user options are considered provided for the effective application. The proposed AC servo motor drive is designed to minimize velocity variation with respect to external load, supply voltage, environmental temperature, and humidity, so can be widely used in the fields of factory automation including robots and CNC msachine tools.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.1
• /
• pp.140-146
• /
• 2014

This experiment aimed to evaluate the effects of different housing systems on behavioral activities, welfare and meat quality of fast-growing broilers. Two hundred broilers were allocated into two housing systems: indoor housing vs indoor with outdoor access. Their general behavior (feeding, drinking, fighting, standing, lying, walking, investigating, dust-bathing and preening) was observed, and tonic immobility, fluctuating asymmetry of legs and wings were measured, and meat quality was analyzed. The results showed that the indoor-housed broilers with outdoor access had significant higher standing, walking, investigating, dust-bathing and preening than those indoor only. However, farming system was not found to significantly affect their feeding, drinking and fighting activities (p>0.05). The value of FA of tibia length of the broilers with outdoor access was significantly lower than that of the indoor-housed birds ($1.57{\pm}1.30$ vs $2.76{\pm}1.40$, p<0.05), while no difference was found for the value of FA in tibia diameter and wing length (p>0.05). TI of the broilers with outdoor access was 165.5 that was significantly higher than that (147.2) of the indoor birds (p<0.05). However, death rate in the outdoor run groups was significantly higher than that of the indoor ones ($2.0{\pm}0.81$ vs $4.0{\pm}0.82$, p<0.05). Meat quality was not affected by the two farming systems. It can be concluded that the results of this study may suggest that the indoor housing with outdoor access provides enriched environment for broilers and facilitates the expression of natural behaviors of the broilers but resulted in poorer performance and higher death rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1262-1270
• /
• 2007

In this paper, we propose a new distortion cancellation mechanism for a balanced power amplifier structure using the carrier cancellation loop of a feedforward and post-distortion technique. The proposed cross post-distortion balanced linear amplifier can reduce nonlinear components as much as the conventional feedforward amplifier through the output dynamic range and broad bandwidth. Also the proposed system provides higher efficiency than the feedforward. The capacities of power amplifier and error power amplifier in the proposed system are analyzed and compared with those of feedforward amplifier. Also the operation mechanisms of the three kind loops are explained. The proposed cross post-distortion balanced linear power amplifier is implemented at the IMT-2000($f_0=2.14\;GHz$) band. With the commercial high power amplifiers of total power of 240 W peak envelope power fer base-station application, the adjacent channel leakage ratio measurement with wideband code division multiple access 4FA signal shows 18.6 dB improvement at an average output power of 40 dBm. The efficiency of fabricated amplifier Improves about 2 % than the conventional feedforward amplifier.

• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.27-35
• /
• 2017

The amount and quality of waste heat from a resource recovery facility were measured. The temperature of exhaust gas was $176.6^{\circ}C$ and the amount of that was 13.8 kg/s. This research designed a waste heat recovery system whose working fluid is R-245fa. It simulated three study cases as follows. In simulation of a basic ORC system, the turbine power output and thermal efficiency were respectively 96.56 kW, 14.3%. In simulation of a superheater connection, 0.09% of efficiency could be improved due to the increase of enthalpy by overheating of working fluid, but the obtained output was decreased with 16.58kW because of the decrease of working fluid mass. In simulation of a process heater connection, efficiency was increased up to 38.51%.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.83-87
• /
• 2000

To investigate exhausted-medium-induced apoptosis in human corneal epithelial(HCE) cells, this study was performed DNA gel electrophoresis, M30 CytoDEATH staining and FAS-FAS ligand ELISA. SV-40 transfected cells were grown to confluency in culture for 7days. The supernatant was harvested and filtered with $0.22{\mu}m$ filter paper. Fresh HCE cells were exposed to the filtered exhausted medium for 1~2 days. Apoptotic cells were prepared for DNA extraction and run the agarose gel for DNA ladder pattern. M30 CytoDEATH was used a tool for easy and reliable determination of very early apoptosis in HCE cells. The control and exhausted medium were assayed for soluble FAS/FAS ligand protein by ELISA. HCE cells exposed to exhausted medium showed a typical DNA ladder pattern. Sporadic M30 CytoDEATH positive cells were detected among HCE cells exposed to exhausted medium. Soluble FAS/FAS ligand levels were not elevated in the exhausted medium compared to the fresh medium control. This study suggests that possible mechanism of exhausted medium induced apoptosis does not include the FAS-FAS ligand system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.631-640
• /
• 2011

This paper proposes a M & S Tool for simulating the detection performance in the bistatic radar system. After examing the interrelationship among the bistatic radar parameters, $P_d$(probability of detection), $P_{fa}$(probability of false alarm) and ��SNR of the received signal, we analyze the range of the bistatic radar range product and range sum. We derive the number of integration of the received pulses that satisfies the required detection performance of the bistatic radar system, along with the analysis of the performance degradation in the jammer scenario. Finally, the analyzed results are implemented in the M & S Tool which consists of 4 modules.