• 암석학회지
• /
• 제9권2호
• /
• pp.84-98
• /
• 2000

주왕산 화산암체의 최하부층에 해당하는 대전사 현무암층은 전체적으로 12매의 용암과 9매의 페페라이트가 교호하며, 각 용암과 페페라이트의 암층의 두께는 다양하다. 현무암류는 육안으로 반정이 관찰되지 않으며 기공이 없는 치밀한 현무암이지만, 한 단위의 용암층 내에서 상부에는 다공질의 현무암이 발견되기도 한다. 경하에서의 현무암류는 주된 반정 광물로 가상의 감람석을 가지며, 사장석과 단사휘석의 반정도 보인다. 석기는 주로 서브오피틱 조직을 보인다. 대전사 현무암류는 MgO 함량이 4.8∼7.6 wt.%, Al2O3 함량은 16∼18 wt.%, CaO 함량은 9.1∼10.9 wt.%, 그리고 FeOT 함량은 7.4∼8.7 wt.%의 조성을 보인다. TAS 성분도와 SiO2에 대한 K2O의 성분도 그리고, 알칼리지수에 대한 Al2O3의 관계도에서는 칼크-알칼리 현무암에 도시된다. MgO를 분화 지수로한 각 산화물의 변화 경향은 MgO가 감소함에 따라서 Al2O3와 CaO는 증가하며, FeOT 함량은 감소하고, 호정성 원소는 감소한다. 불호정성 원소 중에서 HFS 원소는 MORB값 비슷한 반면에, LIL 원소는 부화되어 있다. 특히 Ce, P, 및 Sm이 약간 부화되어 있으며, Nb는 뚜렷한 부이상을 보인다. 희토류 원소는 전체적으로 부화되어 있으며, HREE에 비해서 LREE가 부화되어 있다. 조구조 판별도에서는. 지판이 침강 섭입하는 지판경제부 영역의 칼크-알칼리 계열 현무암에 도시되고, 특히 Th/Yb에 대한 La/Yb의 상관도에서는 본 현무암류가 대륙연변호 칼크-알칼리 화산대 환경에서 생성되었음을 알 수 있다. 대전사 현무암류의 초생 마그마는 섭입에 따른 유체의 공급으로 쐐기형 상부맨틀을 구성하는 석류석 감람암이 약 15% 부분용융되어 생성된 현무암질 마그마에서 유래되었다. 이들 마그마는 분출되기 직전에 주로 감람석의 분별 정출작용과 지각 물질이 동화되면서 진화된 후, 분출하였다. 필요가 있다.이 높게 나타났다.들을 대상으로 규칙적인 식사의 중요성과 다양한 식품의 섭취를 홍보하는 영양교육 이 보건소를 통해 강화되어야 하리라고 보여진다.인들의 계절별 식품 섭취량에 있어 겨울철의 식품 섭취량이 다른 계절에 비해 유의하게 높았으며, 남자노인보다는 여자노인이 식품섭취에 계절에 의한 영향을 더욱 더 많이 받는 것으로 나타났다. 또한 장수 노인들은 가공식품보다는 계절마다 제철에 생산 되는 자연 식품의 섭취비율이 높았다. 전반적으로 장수노인들은 소식의 경향을 보였으며 이 와 같은 소식습관과 신선한 식물성 식품들의 일상 섭취가 건강한 장수에 영향을 미쳤을 가 능성도 있을 것으로 사료된다.며, 지방 조직내 지방축적에 영향을 미친다는 것을 말해 준다.에서 하는 부모교육과 반상회의 홍보자료에 반상회의 홍보자료에 반드시환경친화적 음식소비행동에 관한 교육이 포함되어야 한다. 조리사의 경우 정기교육과정에 환경친화적 음식소비행동에 관한 홍보를 함께 함으로써 외식이나 단체급식에서 발행하는 음식물 쓰레기의 양을 줄 일 수 있을 것이다.m its genes controlling host specificity to its population sturctures and dynamics, have begun to provide new insights into the potential mechanisms underlying race variation. In this review we aim to provide an overview on (a) the molecular basis of host specificity of M. grisea, (b) the population structure and dynamics of rice pathogens, and (c) the nature and mechanisms of genetic changes underpinning virulence variation

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1411-1413
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD (Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn wt 10%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature $150^{\circ}C$ and 8% $O_2$ partial pressure showed about $3.6{\Omega}/{\square}$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.360-366
• /
• 2015

In this study $TiO_2$ nanotube was grown on Ti by anodic oxidation to be used as a photocatalyst. The growth and formation of $TiO_2$ nanotube was monitored during anodization in ethylene glycol electrolyte by changing voltage and composition of electrolyte. Commercially available titanium plate (purity>99.8%, thickness:1mm) Applied voltage and concentration of $NH_4F$ and $H_2O$ were varied to find the optimum condition. Applied voltage is important to make $TiO_2$ nanotube and the electrolyte containing ethylene glycol, 0.2 wt% $NH_4F$ and 2 vol% $H_2O$ was confirmed to be the optimum conditions for the formation and growth of $TiO_2$ nanotubes.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권2호
• /
• pp.80-88
• /
• 2000

In order to predict thermodynamic performance of refrigeration system, it is required to know the oil concentration of the refrigerant/oil mixture. The current method is to extract the working mixture and then to measure the oil weight. In this study, oil concentration is measured in si.tu way without any extraction of the working fluid. Based on the measurement, a working equation is presented as follows, C=a +b x t +c x $t^2$ +(d + e x t +f x $t^2$) x SG. C is oil concentration, t is temperature($^{\circ}C). SG Is specific gravity of mixture and a~f is coefficients The oil concentration ranges over 0~l2 wt% and the temperature ranges over 20~50$^{\circ}C. The specific gravity and temperature are measured using the on-line densimeter and thermometer. This working equation enables to predict the oil concentration without any extraction of the mixture. This equation can be applied for R-12/Naphthenic oil and R-134a/P0E oil liquid mixtures.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.55-61
• /
• 2006

The microwave dielectric properties and low temperature sintering of $Ca[Ti_{1-x}(Ni_{1/3}Nb_{2/3})_x]O_3$ system were investigated at the sintering temperature $1,200\~1,350^{\circ}C$. The density and quality factors $(Q{\times}f)$ increased while dielectric constants slightly decreased with the decrease of Ti. The dielectric constant, quality factor, and temperature coefficient of resonance frequency $(\tau_f)$ were 64, 17,000 GHz, and $-9.1\;ppm/^{\circ}C$ respectively, when $CaTi_{1/2}(Ni_{1/3}Nb_{2/3})_{1/2}O_3$ ceramics were sintered at $1,300^{\circ}C$ for 4 h. $2Li_2O-B_2O_3$ was added to $CaTi_{1/2}(Ni_{1/3}Nb_{2/3})_{1/2}O_3$ to decrease the sintering temperature for LTCC application. The microwave dielectric properties of the samples sintered at $925^{\circ}C$ for 2 h with the addition of $6\;wt\%\;2Li_2O-B_2O_3$ were $\varepsilon_r=48.7,\;Q{\times}f=8,460\;GHz$, and $\tau_f=+5.6ppm/^{\circ}C$. Compatibility test of the composition with silver electrode shows no reaction with silver electrode, implying the feasibility as a high-K LTCC material.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.226-226
• /
• 2016

PHOLED devices which have the structure of ITO/HAT-CN(5nm)/NPB(50nm)/EML(30nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) are fabricated to investigate the green emission profile in EML by using a gasket doping method. CBP and Ir(ppy)3 (2% wt) are co-deposited homogeneously as a background material of EML for green PHOLED, then a 5nm thickness of additionally doped layer by Ir(btp)2 (8% wt) is formed as a profiler of the green emission. The total thickness of the EML is maintained at 30nm while the distance of the profiler from the HTL/EML interface side (x) is changed in 5nm steps from 0nm to 25nm. As shown in Fig. 1, the green (513nm) peak from Ir(ppy)3 is not observed when Ir(btp)2 is also doped homogeneously because Ir(ppy)3 works as an gasket dopant of the Ir(btp)2 :CBP system. Therefore, in this experment, Ir(btp)2 can be used as a profiler of the green emission in CBP:Ir(ppy)3 system. The emission spectra from the PHOLED devices with different x are shown in Fig. 2. In this gasket doping system, stronger red peak means more energy transfer from green to red dopant or higher exciton density by green dopant. To find the green emission profile, the external quantum efficiency (EQE) at 3mA/cm2 for red peaks are calculated. More green light emission at near EML/HBL interface than that of HTL/EML is observed (insert of Fig. 2). This means that the higher exciton density at near EML/HBL interface in homogeneously doped CBP with Ir(ppy)3. As shown in Fig. 3, excitons can be quenched easily to HTL(NPB) because the T1 level of HTL(2.5eV) is relatively lower than that of EML(2.6eV). On the other hand, the T1 level of HBL(2.7eV) is higher than that of EML.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.225-225
• /
• 2016

PHOLED devices which have the structure of ITO/HAT-CN(5nm)/NPB(50nm)/EML(47nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) are fabricated to investigate the diffusion length of the triplet exciton by using double-quantum-well(DQE) EML structure. To fabricate DQW structures, Ir(ppy)3(2% wt) and Ir(btp)2(8% wt) are used as green and red emission zones, respectively. In DQW structured EML, as shown in Fig. 1, 1nm thick layers of green and red emission zones are located middle of the EML, and the distance between these wells(x) is changed from 0nm to 10nm. As shown in Fig. 2, the emission spectra from DQW PHOLED devices are changed with different x. The intensity of the green emission(520nm) is decreased when x is decreased, and it goes to near zero when x=0nm. This behavior can be identified as the diffusion of the triplet excitons from Ir(ppy)3 to Ir(btp)2 by the Dexter energy transfer(DET). From the external quantum efficiency(EQE) of the red emission, as shown in Fig. 3, the diffusion length of the triplet excitons can be determined by the equation of DET rate, R=A Exp(-2RDA/L), where RDA is donor-acceptor distance and L is the sum of the van der Wals radii. As a result, the measured data of the red EQEs with different x are identified to theoretical result from the equation of DET rate(Fig. 4). From this results, we could confirm that the diffusion length of the triplet excitons can be determined by using DQW structure and this method is very useful to investigate the behavior of the excitons in PHOLEDs.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권14호
• /
• pp.5701-5707
• /
• 2014

Background: Salivary gland tumours, which account for approximately 3% of head-neck cancers, are a heterogeneous group and thus it is difficult to identify their epidemiological characteristics. The aim of this study is to determine demographic features and histopathologic distribution of parotid neoplasms in a large sample from Turkey. Materials and Methods: This study was conducted retrospectively on 136 parotidectomy materials from operations between May 2009-May 2013. Age, gender, tumor diameter, histopathological diagnosis and surgical margin status were recorded. Results: The benign cases were 112 (82.4%), while the malignancies were 24 (17.6%). The accuracy rate of FNAC was 91%. There were 46 (33.8%) male and 90 (66.2%) female patients. Female/male ratio (M/F=0.5) was two, the Warthin (WT) tumor being more apparent in males (p<0.05). Pleomorphic adenoma (PA) was detected most frequently among benign pathologies at 61.6% (69/112), while the Warthin Tumor (WT) was detected as the second most frequent tumor at 20.5% (23/112). Mucoepidermoid carcinoma (MEC) and carcinoma ex pleomorphic adenoma (Ca ex PA) were detected at equal frequency at 20.8% (5/24) among malign tumors. These were followed by acinic cell carcinoma at 16.7% (4/24). While the surgical margin was positive in ten patients with malignant tumors (41.7%), all of the benign tumors were negative (p<0.01). No significant difference was detected in the age-gender of patients, tumor size and distribution of sites among benign and malignant groups (p>0.05). Conclusions: Pleomorphic adenoma is the most frequently reported benign tumor almost in all global literature. Yet, the distribution of malignant tumors displays geographical differences. Based on these data, we believe that our findings will provide a significant contribution to future epidemiological studies. We think that it will be beneficial to generate awareness on parotid tumors and ensure a fight against smoking as with all head-neck cancers.

• Advances in Energy Research
• /
• 제5권3호
• /
• pp.219-226
• /
• 2017

Electrochemical double layer capacitors (EDLCs) have received a tremendous interest due to their suitability for diverse applications. They have been fabricated using different carbon based electrodes including activated carbons, single walled/multi walled carbon nano tubes. But, graphite which is one of the natural resources in Sri Lanka has not been given a considerable attention towards using for EDLCs though it is a famous carbon material. On the other hand, EDLCs are well reported with various liquid electrolytes which are associated with numerous drawbacks. Gel polymer electrolytes (GPE) are well known alternative for liquid electrolytes. In this paper, it is reported about an EDLC fabricated with a nano composite polyethylene oxide based GPE and two Sri Lankan graphite based electrodes. The composition of the GPE was [{(10PEO: $NaClO_4$) molar ratio}: 75wt.% PC] : 5 wt.% $TiO_2$. GPE was prepared using the solvent casting method. Two graphite electrodes were prepared by mixing 85% graphite and 15% polyvinylidenefluoride (PVdF) in acetone and casting n fluorine doped tin oxide glass plates. GPE film was sandwiched in between the two graphite electrodes. A non faradaic charge discharge mechanism was observed from the Cyclic Voltammetry study. GPE was stable in the potential windows from (-0.8 V-0.8 V) to (-1.5 V-1.5 V). By increasing the width of the potential window, single electrode specific capacity increased. Impedance plots confirmed the capacitive behavior at low frequency region. Galvanostatic charge discharge test yielded an average discharge capacity of $0.60Fg^{-1}$.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.67-74
• /
• 2002

A phosphor for Plasma Display Panel, BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$, showing a blue emission band at about 450nm was prepared by a solid-state reaction using BaCO$_3$, $Al_2$O$_3$, MgO, Eu$_2$O$_3$ as starting materials wish flux AlF$_3$. The study of the behaviour of Eu in BAM phosphor was carried out by the photoluminescence spectra and the Rietveld method with X-ray and neutron powder diffraction data to refine the structural parameters such as lattice constants, the valence state of Eu, the preferential site of Mg atom and the site fraction of each atom. The phenomenon of the concentration quenching was abound 2.25~2.3wt% of Eu due to a decrease in the critical distance for energy transfer of inter-atomic Eu. Through the combined Rietveld refinement, R-factor, R$_{wp}$, was 8.11%, and the occupancy of Eu and Mg was 0.0882 and 0.526 at critical concentration. The critical distance of Eu$^{2+}$ in BAM was 18.8$\AA$ at 2.25% Eu of the concentration quenching. Furthermore, c/a ratio was decreased to 3.0wt% and no more change was observed over that concentration. The maximum entropy electron density was found that the modeling of $\beta$-alumina structure in BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$correct coincided showing Ba, Eu, O atoms of z= 1/4 mirror plane.e.ane.e.