• 제목/요약/키워드: F2C

검색결과 6,902건 처리시간 0.038초

$(HF)_2(CO)$ 분자착물에 관한 Ab Initio 연구 (Ab Initio Studies on the $(HF)_2(CO)$ Trimers)

  • 김승훈
    • 대한화학회지
    • /
    • 제42권6호
    • /
    • pp.629-637
    • /
    • 1998
  • $6-31+G^{\ast}^{\ast}와\;6-311+G^{\ast}^{\ast}$의 기본조를 사용해서 이합체 분자착물 FH…FH, FH…CO, FH…OC 뿐만 아니라 $(HF)_2(CO)$의 형성가능한 두가지 삼합체 분자착물들에 대해서 HF-SCF, MP2 그리고 B3LYP 계산을 수행했다. 이 삼합체 분자착물들에 대한 여러 가지 바닥상태 성질들을 구하였으며, 대응하는 단위체들과 이합체들의 성질들과 비교하였다. FH…CO가 FH…OC에 비해 평균 0.85 kcal/mol 만큼 안정했고, F-H…F-H…C≡O가 F-H…F-H…O≡C 보다 1∼2 kcal/mol 만큼 안정한 것으로 계산되었다. 삼합체 분자착물 형성에 따른 C≡O stretching band 는 그들의 이합체들(FH…CO, FH…OC)에 비해 각각 24, $37\;cm^{-1}$만큼, H-F stretching band는 각각 $54, 353\; cm^{-1}$만큼 red shift 되는 것으로 평가되었다.

  • PDF

인삼 유묘 뿌리썩음병 진전에 따른 토양군별 특성 (Characteristics of Soil Groups Basd on the Development of Root Rot of Ginseng Seedlings)

  • 박규진;정후섭
    • 한국식물병리학회지
    • /
    • 제13권1호
    • /
    • pp.46-56
    • /
    • 1997
  • Based on the principal component analysis (PCA) of Richards' parameter estimates, ginseng field soils were grouped as the principal component 1 (PC1) and the principal component 2 (PC2). The microflora and physico-chemical characteristics of each soil group were compared to elucidate soil environmental factors affecting the disease development of root rot of ginseng seedling. Among 3 soil groups by PC1, there were differences in the populations of total fungi (TF) and Cylindrocarpon plus Fusarium (C+F), and the population ratio of Cylindrocarpon plus Fusarium to total fungi or total bacteria (C+F/TF, C+F/TB) in rhizoplane of ginseng seedlings, the population of total actinomycetes (TA) and the population ratio of total Fusarium to total actinomycetes (Fus/TA) in soil, and soil chemical properties (EC, NO3-N, K, Mn, ect.). Among 4 soil groups by PC2, there were differences in TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane, Trichoderma plus Gliocladium (T+G) in soil, and P2O5 content in soil. Especially, EC, NO3-N, K, K/Mg and Mn were positively correlated to PC1, and TA was negatively to PC1; however, TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane were significantly correlated to PC2 positively. On the other hand, microbes in the rhizoplane were not significantly correlated to the stand-missing rate (SMR), although TA and Fe/Mn were negatively correlated, and pH and Ca were positively correlated to SMR.

  • PDF

C$_4$F$_8$/H$_2$ helicon were 플라즈마를 이용한 contact 산화막 식각 공정시 과식화된 실리콘 표면의 잔류막과 손상층 형성 및 이의 제거에 관항 연구 (A study on the formation and removal of residue and damaged layer on the overched silicon surface during the contact oxide etching using $C_4$F$_8$/H$_2$ helicon were plasmas)

  • 김현수;이원정;백종태;염근영
    • 한국표면공학회지
    • /
    • 제31권2호
    • /
    • pp.117-126
    • /
    • 1998
  • In this study, the residue remaining on the silicon wafer during the oxide overetching using $C_4F_8/H_2$ helicon were plasmas and effects of various cleaning and annealing methods on the removal of the remaining residue were investigated. The addition of 30%$H_2$ to the C4F8 plasma increased the C/F ratio and the thickness of the residue on the etched silicon surface. Most of the residuse on the etched surfaces colud be removed by the oxygen plasmsa cleaning followed by thermal annealing over $450^{\circ}C$. Hydrogen-coataining residue formed on the silicon by 70%$C_4F_8/30%H_2$ helicon plasmas was more easily removed than hydrogen-free residue formed residue formed by $C_4F_8$ helicon wear plasmas. However, damage remaining on the silicon surface overetched using 70%$C_4F_8/30%H_2$ helicon plasmas was intensive and the degree of reocvery duing the post-annealing was lower.

  • PDF

하론-1301로부터 CF$_3$I와 $C_2$F$_{5}I$ 의 합성 (Synthesis Study of CF$_3$I and $C_2$F$_{5}I$ from Halon-1301)

  • 김재덕;임종성;이윤우;이윤용
    • 한국화재소방학회논문지
    • /
    • 제16권3호
    • /
    • pp.32-38
    • /
    • 2002
  • 지구의 오존층 보호를 위해 폐기되는 $CF_3Br$재활용을 위해 $CF_3Br$을 원료로 $CF_3I$$C_2F_5I$의 합성연구를 수행하였다. 실험실규모의 $CF_3$I$C_3F_5I$의 합성실험장치에서 CuI, Kl, $K_2CO_3$, KF등의 금속염을 활성탄과 알루미나에 담지시킨 촉매를 사용하여 $400~600^{\circ}C$에서 반응을 실시하였다. 반응실험 결과 주생성물은 $CF_3I$$C_2F_5I$ 이며 미량의 $C_2F_6$, $CF_4$, $CF_2Br_2$등도 생성되었다. $CF_3I$합성촉매로는 활성탄에 7.5wt% KI와 $K_2CO_3$를 담지시킨 것이 가장 우수한 성능을 나타내었으며 $C_2F_5I 의 합성촉매로는 알루미나에 7.5wt% Cul를 담지시킨 것이 가장 우수하였다. 또한 최적 반응온도는 $500^{\circ}C$ 부근이었다.

$C_2F_{6}$ 가스가 Via Etching 특성에 미치는 영향 (Effects of $C_2F_{6}$ Gas on Via Etching Characteristics)

  • 류지형;박재돈;윤기완
    • 대한전자공학회논문지SD
    • /
    • 제39권1호
    • /
    • pp.31-38
    • /
    • 2002
  • 0.35㎛-비아(via) 식각공정을 개선하기 위하여 C₂F/sub 6/가스의 식각특성을 분석하였다. 실험한 재료는 TEOS/SOG/TEOS 막을 올린 8인치 웨이퍼이며, 실험의 기법은 직교행열(Orthogonal array matrix) 실험 방식을 활용하였다. 산화막 식각에 이용된 장비는 transformer coupled plasma(TCP) source 방식이며 고밀도 플라즈마(HDP)장비이다. 실험의 결과는, 실험변수의 범위 내에서 C₂F/sub 6/는 0.8㎛/min-1.l㎛/min 범위의 식각속도를 보이며 균일도(Uniformity)는 ±6.9%미만으로 측정되었다. CD 변화(skew)는 식각 전과 후를 비교하여 10% 미만이었고 그 결과 비등방성(anisotropic) 식각의 특성이 우수하였다. C₂F/sub 6/를.20sccm 공급할 때 문제점이 발견되지 않았지만 14sccm을 공급하면 SOG 막의 내벽이 침식당하는 문제점이 있었다. 결과적으로 C₂F/sub 6/는 HDP TCP에서 빠른 식각비와 넓은 공정창(process window)을 가진 식각특성을 나타내었다.

ON SOME SPECIAL DIFFERENCE EQUATIONS OF MALMQUIST TYPE

  • Zhang, Jie
    • 대한수학회보
    • /
    • 제55권1호
    • /
    • pp.51-61
    • /
    • 2018
  • In this article, we mainly use Nevanlinna theory to investigate some special difference equations of malmquist type such as $f^2+({\Delta}_cf)^2={\beta}^2$, $f^2+({\Delta}_cf)^2=R$, $f{^{\prime}^2}+({\Delta}_cf)^2=R$ and $f^2+(f(z+c))^2=R$, where ${\beta}$ is a nonzero small function of f and R is a nonzero rational function respectively. These discussions extend one related result due to C. C. Yang et al. in some sense

Reaction Properties of Dinuclear Metallocenes

  • Noh Seok-Kyun;Jeong Eung-Yeong;Qei Duang Huang Dan;Lyoo Won-Seok
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.224-225
    • /
    • 2006
  • The Ethylene polymerization behavior of a series of polymethylene bridged dinuclear CGC $[Zr({\eta}^{5}:{\eta}^{1}-C_{9}H_{5}SiMe_{2}NCMe_{3})Me_{2}]_{2}[(CH_{2})_{n}]\;[_{n}=6(1),\;9(2),\;12(3)]$ in the cocatalytic activation with $Ph_{3}C^{+}B^{-}(C_{6}F_{5})_{4}\;(B_{1})\;or\;Ph_{3}C^{+}(C_{6}F_{5})_{3}B^{-}C_{6}F_{4}B^{-}(C_{6}F_{5})_{3}Ph_{3}C^{+}\;(B_{2})\;or\;B(C_{6}F_{5})_{3}\;(B_{3})$ were investigated to study the nuclearity effects as well as the counteranion effects. The ethylene polymerization and ethylene/1-hexene copolymerization were conducted at $30^{\circ}C$ It was found that both in ethylene polymerization and ethylene/1-hexene copolymerization, activities increased in the order of 1 < 2 < 3, which indicates the presence of longer bridge between two active sites contributes more efficiently to facilitate the polymerization activity.

  • PDF

글로우방전을 이용한 폴리에스테르 직물의 투습방수성 개질 (Water Repellent Finish of Polyester Fabric Using Glow Discharge Treatment)

  • 김태년
    • 한국의류학회지
    • /
    • 제25권1호
    • /
    • pp.154-161
    • /
    • 2001
  • We have treated polyester fabric with $CF_4,\;C_2F_6,\;SF_6\;and\;C_3F_6$ glow discharge plasmas to develop functional fabrics which preserve moisture transportation and water proofing nature. Modified properties were evaluated by water vapor permeation rate and breakthrough water pressure. The change of surface morphology was observed by SEM. Fiber interstice of the plasma treated fabric was calculated as $0.32{\mu}{\textrm}{m}$, and this value was sufficiently ideal as water repellent material. The moisture transportation of ${CF_4}-treated$ fabric was good as much as untreated fabric, and those of $C_2$F(sub)6-treated, SF(sub)6-treated fabrics were reduced by 1~3%, and that of ${C_3F_6}-treated$ fabric was reduced by 15%. The best treatment condition were 0.06 torr 120 seconds in $CF_4$, 0.05 torr 30 seconds in $SF_6$, 0.08~0.15 torr 90 seconds in $SF_6$ and 0.1 torr 45 seconds in $C_3F_6$ respectively. The grade of moisture transportation effect was $CF_4>C_2F_6>SF_6>>C_3F_6$, and water proofing effect was $C_2F_6{\approx}CF_4>C_3F_6>SF_6$. It was observed by SEM that the thin film was formed on the surface of the treated substrate by the fluorocarbon plasma treatment.

  • PDF

CuO ${B_2}{O_3}$첨가에 따른 $PbWO_4$-$TiO_2$세라믹스의 마이크로파 유전특성 (Effects of CuO and ${B_2}{O_3}$Additions on Microwave Dielectric Properties of $PbWO_4$-$TiO_2$Ceramic)

  • 최병훈;이경호
    • 한국세라믹학회지
    • /
    • 제38권11호
    • /
    • pp.1046-1054
    • /
    • 2001
  • 적층일체형 RF 수동소자 모듈 구현을 위한 저온소결 유전체로의 사용을 위해 B$_2$O$_3$ 및 CuO의 첨가가 PbWO$_4$-TiO$_2$계 세라믹의 고주파 유전특성에 미치는 영향을 조사하였다. 본 연구자는 PbWO$_4$가 8$50^{\circ}C$에서 소결이 가능하고 우수한 유전특성($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz, $ au$$_{f}$ =-31 ppm/$^{\circ}C$)을 보여 LTCC 재료로의 응용가능성이 있다고 판단하였다. 이에 PbWO$_4$$\tau$$_{f}$ 조절을 위해 TiO$_2$를 첨가하여 8$50^{\circ}C$에서 소결한 결과 TiO$_2$의 함량이 8.7 mol%일 때 $\tau$$_{f}$ 를 +0.2ppm/$^{\circ}C$로 조절할 수 있었고, 이때 $\varepsilon$$_{r}$ 및 Q$\times$f$_{0}$ 값은 각각 22.3과 21400GHz이었다. TiO$_2$첨가량 증가에 따른 Q$\times$F$_{0}$ 값의 감소는 결정립 크기 감소에 의한 것이었다. Q$\times$f$_{0}$ 값의 개선을 위해 다양한 량의 CuO 및 B$_2$O$_3$를 첨가한 결과, 최적의 유전특성을 얻기 위해서는 적정량의 첨가량이 필요함을 알 수 있었다. CuO 첨가의 경우 유전특성 개선을 위한 최적의 첨가량은 0.05 wt%이었고 이 조성을 8$50^{\circ}C$에서 소결한 결과, 얻어진 유전특성은 $\varepsilon$$_{r}$=23.5, Q$\times$f$_{0}$=32900 GHz, $\tau$$_{f}$ =-2.2 ppm/$^{\circ}C$이었다. B$_2$O$_3$첨가의 경우 최적의 첨가량은 1.0~2.5 wt%이었으며 8$50^{\circ}C$에서 소결한 경우 얻어진 유전특성은 $\varepsilon$$_{r}$20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$이었다.

  • PDF

GENERALIZED QUADRATIC MAPPINGS IN 2d VARIABLES

  • Cho, Yeol Je;Lee, Sang Han;Park, Choonkil
    • Korean Journal of Mathematics
    • /
    • 제19권1호
    • /
    • pp.17-24
    • /
    • 2011
  • Let X, Y be vector spaces. It is shown that if an even mapping $f:X{\rightarrow}Y$ satisfies f(0) = 0, and $$2(_{2d-2}C_{d-1}-_{2d-2}C_d)f\({\sum_{j=1}^{2d}}x_j\)+{\sum_{{\iota}(j)=0,1,{{\small\sum}_{j=1}^{2d}}{\iota}(j)=d}}\;f\({\sum_{j=1}^{2d}}(-1)^{{\iota}(j)}x_j\)=2(_{2d-1}C_d+_{2d-2}C_{d-1}-_{2d-2}C_d){\sum_{j=1}^{2d}}f(x_j)$$ for all $x_1$, ${\cdots}$, $x_{2d}{\in}X$, then the even mapping $f:X{\rightarrow}Y$ is quadratic. Furthermore, we prove the Hyers-Ulam stability of the above functional equation in Banach spaces.