• Korean Journal of Clinical Laboratory Science
• /
• v.39 no.3
• /
• pp.249-255
• /
• 2007

While respiratory burst enhances neutrophil glucose utilization, many neutrophil functions are critically influenced by extracellular matrix interaction and phosphoinositide-3-OH kinase (PI3K) signaling. We thus evaluated the role of RGD integrin occupancy and PI3K inhibition on respiratory burst and [18F]FDG uptake of stimulated neutrophils. Human neutrophils were stimulated by 100 ng/mL phorbol-myristate-acetate (PMA), and respiratory burst was measured by cumulative luminescence with lucigenin. [18F]FDG uptake and total hexokinase activity was measured 20 min after PMA stimulation in the presence or absence of soluble RGD peptides (200 g/mL) and/or the PI3K inhibitor wortmannin (200 nM). PMA induced a 71.70.9 fold increase in neutrophil oxygen intermediate generation. [18F]FDG uptake was increased to $194.6{\pm} 3.7%$ and hexokinase activity to $145.0{\pm}2.0%$ of basal levels (both p<0.0005). RGD peptides attenuated respiratory burst activation to $35.6{\pm}0.2%$ (p<0.005), but did not inhibit stimulated [18F]FDG uptake or hexokinase activity. In contrast, without affecting respiratory burst activation, wortmannin inhibited PMA stimulated [18F]FDG uptake to $66.9{\pm}1.6%$ and hexokinase activity to $81.0{\pm}4.2%$ (both P<0.0005), demonstrating its dependence on PI3K activity. Neither RGD nor wortmannin reversed the other's inhibitory effect on stimulated [18F]FDG uptake and hexokinase activity or respiratory burst, which suggests the involvement of distinct signaling pathways. Neutrophil [18F]FDG uptake is enhanced by PMA through a mechanism that requires PI3K activity but is independent of integrin receptor occupancy or respiratory burst activation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.113-115
• /
• 2004

Six generations (P$_1$, P$_2$, F$_1$, BC$_1$, BC$_2$ and F$_2$) of four bivoltine silkworm crosses (SKAU-R-1 ${\times}$ Yakwei, SKAU-R-6 ${\times}$ Yakwei, CSR$_2$ ${\times}$ CSR$_4$ and SH$_{6}$${\times}$ NB$_4$D$_2$) were evaluated in a completely randomized block design with 5 replications for each treatment. The generation mean 2 in respect of 3 metric traits (single cocoon weight, single shell weight, and shell ratio ％), were subjected to Cavallis joint scaling test. Additive dominance model was found to be adequate in CSR$_2$${\times}$CSR$_4$ and SH$_{6}$${\times}$ NB$_4$D$_2$ for single cocoon weight and shell weight and SKAU-R-6 ${\times}$ Yakwei for shell ratio(％). Whereas, in rest of the crosses epistasis was evident in the traits under investigation. Magnitude of additive gene effect (d) was greater than dominance(h) in SH$_{6}$${\times}$NB$_4$D$_2$ and SKUA-R-6${\times}$Yakwei for shell ratio (％) and in CSR$_2$${\times}$ CSR$_4$ for shell weight. Thus selection for these traits in early segregating generations of these crosses would be effective for obtaining considerable genetic gain. gain.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.76-82
• /
• 2003

The robust stack storage node and sufficient cell capacitance for high performance is indispensable for 90 nm DRAM capacitor. For the first time, we successfully demonstrated MIS capacitor process integration for 90 nm DRAM technology. Novel cell layout and integration technology of 90 nm DRAM capacitor is proposed and developed, and it can be extended to the next generation DRAM. Diamond-shaped OCS with 1.8 um stack height is newly developed for large capacitor area with better stability. Furthermore, the novel $Al_2O_3/HfO_2$ dielectric material with equivalent oxide thickness (EOT) of 25 ${\AA}$ is adopted for obtaining sufficient cell capacitance. The reliable cell capacitance and leakage current of MIS capacitor is obtained with ~26 fF/cell and < 1 fA/ceil by $Al_2O_3/HfO_2$ dielectric material, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.2
• /
• pp.1-6
• /
• 1979

Diallel crosses among six silkworm varieties were used as the materials. by the randomized block design, and diallel cross analyse were conducted to determine the relationships between parents and their F$_1$hybrids. The six parents and their 30 F$_1$crosses were evaluated for five quantitative characters in each female and male silkworms. All methods utilized were similar in detecting lines giving unexpected performance in the F$_1$generation. Mean values of total cocoon weight and weight of cocoon layer of female silkworms were more than those of male silkworms, but mean values of cocoon layer ratio of female silkworms were less than those of male silkworms in both parents and 30 F$_1$hybrids. Over dominance was exhibited by total cocoon weight and weight of cocoon layer, and partial dominance was exhibited by periods (days) of larval stage, periods (days) of 5th instar and cocoon layer ratio (weight of cocoon layer/total cocoon weight). Furthermore, it was recognized that varieties F (Yunil) and E (Kyung-choo) were recommendable varieties as the parents in breeding of silkworms for increasing the total cocoon weight and weight of cocoon layer, etc.

• Journal of the Korean Society of Tobacco Science
• /
• v.17 no.1
• /
• pp.27-32
• /
• 1995

A new flue-cured tobacco mutant line BU 8832-85 was developed at Taegu Experiment Station, Korea Ginseng and Tobacco Research Institute in 1994. KF 8832-85 was resulted from a cross of flue-cured cultivars NC 95$\times$NC 2326, and developed by a pedigree system of breeding ; initial selection was made by plant type and resistance to bacterial wilt(BW) disease(heudomonas solanaceamm) in the F2 generation under the natural field conditions infested with the pathogen. One white flowered plant was occurred by spontaneous mutation in a certain line among the F3 generatioin while the others were pink. Six plants from the seeds by selfing were selected at the field infested with the pathogen among 240 populations with white flowering in the F4, KF 8832-85 was selected based on yield and leaf quality trials among 6 lines in Fs generation. BCF 8832-85 was compared with its Parent for certain agronomic and chemical characteristics at Taegu Experiment Station in 1993 and 1994. The results showed that KF 8832-85 have white flower, the stalk height was approximately that of NC 2326 but averaged about loom taller than NC 95. It produced ground suckers as much as NC 95, and did not breakdown leaf at the same as WC 2326. KF 8832-85 have high resistance to bacterial wilt disease. Yield of KF 8832-85 was 10 and 18% higher then that of NC 2326 and WC 95, respectively. Price per Kg was equal to that of NC 2326. The contents of nicotine and reducing sugar did not differ significantly from NC 95, while total nitrogen was significantly lower than NC 95. Therefore, the new mutant line is genetically stable for agronomic and chemical characteristics and provides a source of bacterial wilt disease resistance for use in breeding resistant flue-cured cultivars. Key words : Mutant line, White flower, Spontaneous mutation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.5
• /
• pp.301-307
• /
• 2016

The purpose of this study is to research the whitening effects of fermentation extract made from the Rice bran and Dendropanax(FRD) Fermentation conditions were as follows; 1) Dendropanaxand and Rice bran were blended in a ratio of 1 to 1, 2) a weight of sugar was 10% of the total weight, 3) an amount of enzyme was 0.1%, and 4) a temperature was 20℃. It has been fermented for 90 days. In order to observe the whitening effects of FRD, the author measured the cell viability and the inhibition rate of the melanin biosynthesis, the activity of tyrosinase and SOD (superoxide dismutase) in malignant melanoma, B16F10 cells. As a result, FRD significantly inhibited the cell viability of B16F10 in more than 500 ㎍/㎖. FRD significantly suppressed the generation of melanin, and that induced by α-melanocyte stimulating hormone (α-MSH) in more than 1,000 ㎍/㎖. FRD significantly decreased the activity of tyrosinase and that induced by α-melanocyte stimulating hormone (α-MSH) in more than 500 ㎍/㎖. FRD did not changed the activity of SOD in dose dependent manner. Therefore, the author considered that the fermentation extract made from a Rice bran and Dendropanax will be able to produce high value-added products, if used as a commercial. Therefore, the author considered that the fermentation extract made from a Rice bran and Dendropanax will be able to produce high value-added products, if used as a commercial.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.29 no.1
• /
• pp.128-134
• /
• 2014

Nesolynx thymus Girault (Hymenoptera: Eulophidae) is one among 20 hymenopteran parasitoids reported to attack the uzi fly, Exorista bombycis, which in turn infests the silkworm, Bombyx mori accounting a cocoon yield loss of 10-20%. A host of factors viz., age and size of host, age and size of parasitoid, availability of host, temperature and quality of host are reported to influence the reproductive efficiency of the parasitoids. In the present study an attempt was made to record the influence of foraging parasitoid density on their reproductive performance. Three day-old uzi pupae were offered to varying numbers (1 - 10) of 2 day old Nesolynx thymus adults for parasitization. The progeny production per pupa (84.44 - 132.77) increased significantly with increase in the number of foraging parasitoid adults (1 - 10) however, progeny production per female decreased. The sex ratio (M : F) (1:25.49 - 1:1.53) decreased significantly with increase in foraging parasitoid adults. The morphometric parameters except female abdomen width of first generation parasitoid showed significant negative correlation with number of foraging adults. However, correlation between the parasitoid size in first generation and their reproductive performance was nonsignificant.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.1-6
• /
• 2005

Machining is a one of the broadly used manufacturing process to produce the parts, products and various molds and dies. The environmental impact due to aerosol generation via atomization process is a major concern associated with environmental consciousness. This paper presents the experimental results to analyze the characteristics of cutting fluid aerosol generation in grinding process. Experimental results show that the generated fine aerosol which particle size less than 10micron appears near worker's breath zone under given operational conditions. The aerosol concentration is much higher enough to affect human health risk with its generated aerosol quantities. This quantitative analysis can be provided the basic knowledge f3r further research for environmentally conscious machining technology developments.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.93-100
• /
• 2000

Die-casting burr due to casting process is removed by post-process for assembly and quality control of product. Though robot has been widely used for deburring job before, CNC exclusive machine is currently developed f3r high power, high speed machining and quick tool change. Deburring tool path with complex 3D curve type is defined to make out deburring NC program. But there is no efficient method to define it currently used methods with teaching probe on machine. In this study the efficient method to make out deburring NC program is developed. 5-axis digitizing machine is used to receive data of deburring path. And the post processor for NC program generation is developed in consideration of the machining conditions. The developed system is not dependent on the skill of operator and has the advantage to maintain the flexibility of job to modify NC program due to the wear of tool and aging of the die casting.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.98.1-98
• /
• 2001

An actuator using a permanent magnet and solenoid is proposed and designed in this paper. Its design concept is composed of a driving force generation, a guide mechanism, and a symmetric structure. At first, Driving Force generation uses a concept that is a change efflux by using a permanent magnet and solenoid. A permanent flux is generated by a permanent magnet. Changeable flux is created by a variable current flowing through coil such the solenoid. The direction of this flux is changed due to current flowing through coils. The combination of permanent and changeable fluxes make various flux densities between yokes of moving part and fixed yokes. And then, the flux densities create forces(F), which are used to drive this actuator, in lower and upper gap. In this actuator ...