• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.21-27
• /
• 2004

In this paper, millimeter-wave monolithic integrated circuit(MIMIC) low noise amplifier(LNA) for V-band, which is applicable to 60 GHz wireless local area network(WLAN), was fabricated using the high performance 0.1 ${\mu}{\textrm}{m}$ $\Gamma$-gate pseudomorphic high electron mobility transistor(PHEMT). The DC characteristics of PHEMT are drain saturation current density(Idss) of 450 mA/mm and maximum transconductance(gm, max) of 363.6 mS/mm. The RF characteristics were obtained the current gain cut-off frequency(fT) of 113 GHz and the maximum oscillation frequency(fmax) of 180 GHz. V-band MIMIC LNA was designed using active and passive device library, which is composed of 0.1 ${\mu}{\textrm}{m}$ $\Gamma$-gate PHEMT and coplanar waveguide(CPW) technology. The designed V-band MIMIC LNA was fabricated using integrated unit processes of active and passive device. The measured results of V-band MIMIC LNA are shown S21 gain of 21.3 dB, S11 of -10.6 dB at 60 GHz and S22 of -29.7 dB at 62.5 GHz. The measured result of V-band MIMIC LNA was shown noise figure (NF) of 4.23 dB at 60 GHz.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.434-439
• /
• 1993

To investigate the effects of neutral salts on the foaming properties of sodium caseinate, turbidity, surface tension, absolute viscosity, foaming ability and foam stability of the caseinate solutions(5%, w/v) with added NaF, $Na_2SO_4$, NaCl, $NaNO_3$, and NaSCN at concentrations of 0.1, 0.5, 1.0, 1.5 and 2.0 M were examined. NaCl and $NaNO_3$ improved the foaming ability compared to sodium caseinate without salt, and also $Na_2SO_4$ and NaF did the foaming ability at the concentrations of 0.1M and 0.5M, while NaSCN did not improve the foaming ability. For foaming ability optimal concentrations of the salts were 0.5, 1.5, and 1.0 M in $Na_2SO_4$, NaCl, and NaSCN, respectively. Additions of $Na_2SO_4$, NaF and $NaNO_3$ at 0.5 M concentrations improved the foam stability of sodium caseinate by 825%, 615%, and 53% compared to control, while those of NaSCN reduced foam stability.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.459-461
• /
• 1990

Me performed an experiment about preionization electron number density of charge transfer type KrF excimer laser. At the total pressure of 1.8 and 2.2 atm with helium (He) buffer gas, the experimental range of the electron number density is 8-9 ${\times}$ 10 cm The distance between electrode and preionization pin is 15 mJ at charging voltage of 27kV,gas pressure of 2.2 atm,gas mixture of F /Kr/He = 0.3/396.7(%).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.91-98
• /
• 2013

Magnetic sensor chip for measuring bio-magnetism is implemented in $0.18{\mu}m$ CMOS technology. The magnetic sensor chip consists of a small-sized high inductance coil sensor and an instrumentation amplifier (IA). High inductance coil sensor with suitable sensitivity and bandwidth for measurement of bio-magnetic signal is designed using electromagnetic field simulation. Low gm operational transconductance amplifier (OTA) using transconductance reduction techniques is designed for on-chip solution. Output signal sensitivity of magnetic sensor chip is $3.25fT/{\mu}V$ and reference noise of 21.1fT/${\surd}$Hz. Proposed IA is designed along with band pass filters(BPF) to reduce magnetic signal noise by using current feedback techniques. Proposed IA achieves a common mode rejection ratio of 117.5dB while the input noise referred is kept below $0.87{\mu}V$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.26-33
• /
• 2010

This paper presents a multi-channel capacitive touch sensing unit for SoC applications. This unit includes a simple common processing unit and switch array to detect the touch sensing input by capacitive-time(C-T) conversion method. This touch sensor ASIC is designed based on the Capacitive-Time(C-T) conversion method to have advantages of small current and chip area, and the minimum resolution of the unit is 41 fF per count with the built-in sensing oscillator, LDO regulator and $I^2C$ for no additional external components. This unit is implemented in 0.18 um CMOS process with dual supply voltage of 1.8 V and 3.3 V. The total power consumption of the unit is 60 uA and the area is 0.26 $mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.784-794
• /
• 1996

In this papre, the design and the fabrication of the surface mountable voltage controlled oscillator is described for local oscillator in PCS(WACS/TDMA) handset. The VCO employs two silicon bipolar transistors of $f_{gamma}$ of 4 GHz as active devices. These are asembled to form the VCO on the 4 layer PCB of the size $12{\times}10mm$which provides the strip line resonator at the third layer. The fabricated VCO shows tuning rage over 50 MHz, phase noise -100 dBc/Hz at the 100 kHz frequency offset, and 0 dBm output power with the consumption of 22 mA at 3V. It is belived that the size will be more reduced by employing 1005 chip components and that the current consumption will be improved by employing transistors of higher $f_{gamma}$.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.35-40
• /
• 1997

To suppress the short channel effects in nMOSFET with 0.1.mu.m channel length, we have fabricated and characterized the ISRC n MOSFET with several process condition. When the recess oxide thickness is 100nm and the channel dose for threshold voltge adjustment is 6*10$^{12}$ /c $m^{-2}$ , B $F_{2}$$^{+}$, the maximum transconductance at $V_{DS}$ =2.0V is 455mS/mm and the BIDL is kept within 67mV. By comparing the ISRC n MOSFET with the conventioanl SHDD (shallowly heavily dopped drain) nMOSFET, we verify the suppression of short channel effects ISRC structure.e.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.681-684
• /
• 2021

In this paper, we study image clustering without labeling using machine learning techniques. We proposed an unsupervised machine learning technique to design an image clustering model that automatically categorizes images into groups. Our experiment focused on inception convolutional neural networks (inception V3) with k-mean methods to cluster images. For this, we collect the public datasets containing Food-K5, Flowers, Handwritten Digit, Cats-dogs, and our dataset Rice Germination, and the owner dataset Palm print. Our experiment can expand into three-part; First, format all the images to un-label and move to whole datasets. Second, load dataset into the inception V3 extraction image features and transferred to the k-mean cluster group hold on six classes. Lastly, evaluate modeling accuracy using the confusion matrix base on precision, recall, F1 to analyze. In this our methods, we can get the results as 1) Handwritten Digit (precision = 1.000, recall = 1.000, F1 = 1.00), 2) Food-K5 (precision = 0.975, recall = 0.945, F1 = 0.96), 3) Palm print (precision = 1.000, recall = 0.999, F1 = 1.00), 4) Cats-dogs (precision = 0.997, recall = 0.475, F1 = 0.64), 5) Flowers (precision = 0.610, recall = 0.982, F1 = 0.75), and our dataset 6) Rice Germination (precision = 0.997, recall = 0.943, F1 = 0.97). Our experiment showed that modeling could get an accuracy rate of 0.8908; the outcomes state that the proposed model is strongest enough to differentiate the different images and classify them into clusters.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.390-399
• /
• 2010

Non-photochemical quenching (NPQ) values for utilizing them to detect osmotic tolerance in plants were examined with two different soybean cultivars, an osmotic tolerant soybean (Shinpaldalkong 2) and a control soybean (Taekwangkong). Two different stresses were applied to the cultivars as the restricted irrigations of 200 and 50 ml water $pot^{-1}\;d^{-1}$ for 5 days for a control and a drought stress, respectively, and a sodium chloride solution of 200 mmol for 6 days for a salt stress. The intact leaves of the two cultivars after treatment were used to measure chlorophyll fluorescence parameters, maximum efficiencies of photosystem II photochemistry (Fv/Fm), efficiencies of photosystem II photochemistry (${\Phi}_{PSII}$), $CO_2$ assimilation rate ($P_N$), and NPQ. Leaf water potentials of the two cultivars decreased from - 0.2 to - 0.8MPa by a drought treatment and from - 0.7 to - 1.7MPa by a salt treatment. Leaf water content of Shinpaldalkong 2 after a salt treatment was less decreased than that of Taekwangkong. $F_v/F_m$ values of both cultivars were not changed, while ${\Phi}_{PSII}$ and $P_N$ were decreased proportionally to leaf water potential decrease. The response of NPQ was occurred in Shinpaldalkong 2 under the drought and salt stresses. With Taekwangkong cultivar, only drought stress referred NPQ response. The cultivar differences on chlorophyll fluorescence parameters were found in the relationships between ${\Phi}_{PSII}$ and $P_N$, and between NPQ and ${\Phi}_{PSII}$. Although the positive relationships between ${\Phi}_{PSII}$ and $P_N$ were established on all treatments of both cultivars, the decreasing rate of ${\Phi}_{PSII}$ to $P_N$ was smaller in Shinpaldalkong 2 than Taekwangkong. The NPQ was increased according to the decrease of ${\Phi}_{PSII}$ by osmotic treatments in Shinpaldalkong 2. The complementary relationships between NPQ and ${\Phi}_{PSII}$ were well maintained at all treatments in Shinpaldalkong 2, while these relationships were lost at a salt treatment in Taekwangkong. Taken together, the results suggest that analysis of complementary relationships between ${\Phi}_{PSII}$ and NPQ could be more valuable and applicable for determining osmotic tolerance than single analysis of each parameter such as $F_v/F_m$, ${\Phi}_{PSII}$ and NPQ.