• Title/Summary/Keyword: F.E.M analysis

Search Result 574, Processing Time 0.03 seconds

A Study on the analysis of activities of t?e 5.H.T. (5.H.T. in Pusan City) (부산지역 양호교사의 업무분석에 관한 연구)

  • Kim, Lee-Sun;Kim, Bok-Yong
    • Research in Community and Public Health Nursing
    • /
    • v.1 no.1
    • /
    • pp.465-502
    • /
    • 1989
  • The purpose of this study was to find out the general characteristics of school health teachers, the status of school health resources and the degrees of self-confident performance for the 124 school health teachers in Pusan City. Data was collected by means of questionaires from Aug. 1986 to Mar. 1987. The data were analyzed by use of percentage, mean, standard deviation, t-test, ANOVA and Pearson-correlation coefficient. The results of this study were as follows: 1 . General Characteristics of School Health Teachers (SHT) 1) The average of age of the SHT was 32.8 years old and 39.5% of them were from 30 to 34 years old. 2) The average for school nursing experience of the SHT was 7.9 years and 37.9% of them were from 5 to 9 years. 3) The 45.2% of them have not the clinical experience. 4) The 74.2% of them were graduated from the 3 years college of nursing. 2. Status of school health resources and nursing activities. 1) The average of student number was 2497.3 and class number was 45.2. 2) The average of school health budget was 1039000 won and 27.7% of school health budget expended on examination cost. 3) Only 29.0% of all schools have organization for school health. 4) The 84.7% of all schools have health clinic separately and 69.1% of schools have less than $33m^2$ sized. 5) The average of clinic visitor number was 2111.8 for 1 year. 6) Major problem was on digestive system. And other problems were skin, respiratory, musculo-skeletal system and dental problem. 7) The number of literal message was 14.4 times for 1 year. 3. The degree of the school health teachers' self-confidence. The school health teachers' self-confidence was deviced into 6 and the maximum degree was 4. 1) Program planning & evaluation; 2.8 2) Clinic management; 2.9 3) Health education, 3.0 4) Management of school environment; 2.7 5) Health care services; 2.7 6) Operating of school health organization; 2.4 4. Significances to the degree of self-confidence on school health nursing activities. 1) There was significant difference between clinical management and Religion (t=2.15 p<.05) 2) There was significant difference between Operating of school health organization and level of school (F=3.588 p<.05) 3) Program planning & evaluation: expending time for clinical management (r=-0.184 p<.05) expending time for health care services (r=0.273 p<.01) 4) Clinical management: use of separate health clinic (r=0.151 p<.05) 5) Health education: use of separate health clinic (r=0.170 p<0.5) 6) Health care services: No. of student (r=-0.144 p<0.5) No. of class (r=-0.160 p<.05) 5. The degree of the school health teachers' self-discipline. The school health teachers' self-discipline was devided into 2 and the maximum degree was 2. 1) Program planning & evaluation:1.8 2) Clinic management: 1.9 3) Health education: 1.9 4) Management of school environment: 1.7 5) Health care services: 1.8 6) Operating of school health organization.: 1.3 6. Significances to the degree of self-discipline on school health nursing activities 1) Program planning & evaluation; Level of nursing education (F=4.309 p<.01) 2) Clinical management: Level of nursing education (F=3.587 p<.05) 3) Operating of school health organization: School health organization (t=-2.68 p<.01) 4) Health care services: School health organization (t=2,58 p<.05) 5) School health performance: School health organization (t=2.32 p<.05) 6) Program planning & evaluation: School health experience (r=0.239 p<.01) Expending time for program planning & evaluation (r=-0.172 p<.05) 7) Clinic management: School health experience (r=0.249 p<.01) Expending time for dinic management (r=0.181 p<.05) No. of student (r=-0.158 p<.05) Expending time of program planning & evaluation (r=-0.199 p<0.5) 8) Health education: School health experience (r=0.234 p<0.1) Expending time of program planning & evaluation (r=-0.193 p<.05) 9) Management of school environment: Age of school health teacher (r=0.142 p<.05) School health experience (r=0.255 p<.01) 10) Operating of school health organization: Medicine Purchase (r=-0.163 p<.05) 11) Health care services: School health experience (r=0.148 p<.05) Medicine purchase (r=-0.229 p<.01) 12) Total school health performance: School health experience (r=0.200 p<.05) Medicine purchase(r=-0.168 p<.05) Based on the above results, the suggestions are as follows: 1) As the SHT take charge of the reasonable number of student, the students will have benefit of the good health service in quality. 2) It is recommended to use the health clinic separately and to arrange adequate place for good school health service. 3) It is necessary that the SHT participate budget for school health. 4) It is required to enhance self-confidence on school health nursing activities through continuous educational programs.

  • PDF

Distribution and Vegetation Structure of Genus Cymbidium (Orchidaceae) in Jeju Island (제주도 내 난과(Orchidaceae) 보춘화속(Cymbidium)식물의 분포 및 자생지의 식생 구조)

  • Hyun, Hwa-Ja;Kim, Hae-Ran;Choi, Hyung Soon;Kim, Chan-Soo
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.16 no.1
    • /
    • pp.1-10
    • /
    • 2014
  • This study was carried out to investigate the range of distribution and vegetation structure of habitats of genus Cymbidium which is distributed in Jeju Island, Korea. This genus is distributed in tropical and subtropical Asia and North Australia. In Korea, there are six species [i. e. C. goeringii (Rchb. f.) Rchb. f., C. kanran Makino, C. lancifolium Blume var. aspdistrifolium (Fukuy.) S. S. Ying., C. macrorhizum Lindl., C. nagifolium Masam. and C. ensifolium L.], which were also distributed in Jeju Island. The habitats of this genus ranged between 16 meter and 574 meter above sea level in Jeju Island. C. macrorhizum had the broadest altitudinal range (16-574 meter above sea level), whereas C. ensifolium, C. nagifolium and C. lancifolium var. aspidistrifolium had the narrow altitudinal range. According to the classification analysis by TWINSPAN, the plant communities were divided into five groups of Castanopsis sieboldii community, Castanopsis sieboldii-Pinus thunbergii community, Pinus thunbergii-Quercus acutissima community, Pinus thunbergii community and Quercus glauca- Aphananthe aspera community. Three species, C. kanran, C. nagifolium, and C. ensifolium inhabited Castanopsis sieboldii community and C. lancifolium var. aspdistrifolium inhabited Castanopsis sieboldii-Pinus thunbergii community. C. macrorhizum inhabited Pinus thunbergii community, Pinus thunbergii-Quercus acutissima community and Quercus glauca-Aphananthe aspera community. C. goeringii inhabitated Castanopsis sieboldii-Pinus thunbergii community and Pinus thunbergii-Quercus acutissima community. The populations of the genus Cymbidium have been extremely decreased due to illegal collection in Jeju Island. Especially, the distribution range of C. kanran, C. nagifolium, and C. ensifolium was narrow and limited to evergreen broad-leaved forests, therefore, conservation plans are needed for the protection of these species.

Study on the Treesize Prediction Model : A case study of Zelkova serrata, Pinus strobus and Magnolia denudata (주요조경수목의 크기 예측 " 모델 "에 관한 연구 : 느티나무, 스트로브잣나무, 백목련을 대상으로)

  • 김남춘;최준수;문석기
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.16 no.1
    • /
    • pp.27-35
    • /
    • 1988
  • Size characteristics of three widely used landscape trees were analized to establish a methodology of size prediction as time Passes. Tree height, tree width, stem diameter(breast or surface), canopy length and tree age were measured directly and indirectly(by using photograph), and the data were analized by using regression analysis through PC-SAS. The results are summarized as follows : 1. Zelkova serrata MAKINO showed relatively slow growth rate and the tree form was changed as aged. Size predictions were available by using the regression equations listed below : Surface diameter = 0.8293 x AGE Tree height = 0.4109(0.8293 x AGE) - 0.0039(0.7273 x AGE)$^2$Tree width = 0.3240(0.8293 x AGE) - 0.0024(0.1293 x AGE)$^2$Canopy length = 0.1337(0.8293 x AGE) - 0.0020(0.7293 x AGE)$^2$2. Pinus strobus L. showed relatively fast growth rate and the tree form did not change much as aged. Size predictions were available by using the regression equations listed below. Breast diameter = 0.756 x AGE Tree height = 0.7695(0.756 x AGE) - 0.0164(0.75\ulcorner x AGE)$^2$Tree width = 0.4331(0.756 x AGE) - 0.0079(0.75\ulcorner x AGE)$^2$Canopy length = 0.1365(0.756 x AGE) - 0.0032(0.75f x AGE)$^2$ 3. In case of Magnolia denudata DESROUX, tree form was determined relatively earlier than the other two species. Si2e predictions were available by using the regression equations listed below : Surface diameter = 0.88 x AGE Tree height = 0.5412(0.88 x AGE) - 0.0110(0.88 x AGE)$^2$ Tree width = 0.3752(0.88 x AGE) - 7.0061(0.88 x AGE)$^2$Canopy length = 0.1110(0.88 x AGE) - 0.0022(0.88 x AGE)$^2$ This study aimed to find a way to predict size change of landscaping plants. This methodology will be applied to a wide range of landscape plants to provide practical data to landscape designers.

  • PDF

Effect of Supplemental Corn Dried Distillers Grains with Solubles Fed to Beef Steers Grazing Native Rangeland during the Forage Dormant Season

  • Murillo, M.;Herrera, E.;Ruiz, O.;Reyes, O.;Carrete, F.O.;Gutierrez, H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.29 no.5
    • /
    • pp.666-673
    • /
    • 2016
  • Two experiments were conducted to evaluate the effects of the level of corn dry distillers grains with solubles (CDDGS) supplementation on growing performance, blood metabolites, digestion characteristics and ruminal fermentation patterns in steers grazing dormant forage. In Exp. 1, of growth performance, 120 steers ($204{\pm}5kg$ initial body weight [BW]) were distributed randomly into 3 groups (each of 40 steers), which were provided with the following levels of CDDGS supplement: 0%, 0.25%, or 0.50% BW. All groups of steers were grazed for 30 days in each of 3 grazing periods (March, April, and May). Approximately 1,000 ha of the land was divided with electric fencing into 3 equally sized pastures (333 ha in size). Blood samples were collected monthly from 20 steers in each grazing group for analysis of glucose (G), urea-nitrogen (UN) and non-esterified fatty acids. Final BW, average daily gain (ADG) and supplement conversion (CDDGS-C) increased with increasing levels of CDDGS supplementation (p<0.05).The CDDGS supplementation also increased the plasma G and UN concentrations (p<0.05). In Exp. 2, of digestive metabolism, 9 ruminally cannulated steers ($BW=350{\pm}3kg$) were distributed, following a completely randomized design, into groups of three in each pasture. The ruminally cannulated steers were provided the same levels of CDDGS supplementation as in the growing performance study (0%, 0.25%, and 0.50% BW), and they grazed along with the other 40 steers throughout the grazing periods. The dry matter intake, crude protein intake, neutral detergent fiber intake (NDFI), apparent digestibility of dry matter (ADDM), crude protein (ADCP) and neutral detergent fiber (ADNDF) increased with increasing levels of CDDGS supplementation (p<0.05). The ruminal degradation rates of CP (kdCP), NDF (kdNDF) and passage rate (kp) also increased with increasing levels of CDDGS supplementation (p<0.05). Ruminal ammonia nitrogen ($NH_3$-N) and propionate concentrations also increased with increasing levels of CDDGS supplementation (p<0.05). However, acetate concentrations decreased with increasing levels of CDDGS supplementation (p<0.05). Liquid dilution rate increased with increasing levels of CDDGS supplementation but ruminal liquid volume decreased (p<0.05). On the basis of these findings, we can conclude that CDDGS supplementation enhanced the productive performance of cattle grazing native rangeland without negatively affecting forage intake, glucose and urea-nitrogen blood concentrations, ruminal degradation and ruminal fermentation patterns.

Comparison of antioxidative activities from different organs of Rosa rugosa Thunb (해당화의 채취 부위별 항산화 활성 비교)

  • Kim, M.J.;Kim, J.S.;Kim, K.E.;Shin, K.H.;Heo, K.;Cho, D.H.;Park, C.H.;Yu, C.Y.
    • Korean Journal of Medicinal Crop Science
    • /
    • v.9 no.1
    • /
    • pp.40-44
    • /
    • 2001
  • DPPH(1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity and Vitamin contents in different plant parts and harvesting time of Rosa rugosa Thunb were determined. Among the plants parts analysed, the highest DPPH radical scavenging activity in part was root $(below\;0.5\;{\mu}g/ml)$, leaf contained the highest ascorbic acid content of 2999.6 mg/100g. Fruit contained ascorbic acid (713.6 mg/ 100g) 4.2 times less than leaf. Vitamin contents in leaf parts also differed depanding on harvesting time. Vitamin content in leaf harvested in November was much higher than that in September. Spectrophotometric analysis of total ${\beta}-carotene$ in leaf showed lower contents than that in fruit.

  • PDF

Mucosal Immunity Related to FOXP3+ Regulatory T Cells, Th17 Cells and Cytokines in Pediatric Inflammatory Bowel Disease

  • Cho, Jinhee;Kim, Sorina;Yang, Da Hee;Lee, Juyeon;Park, Kyeong Won;Go, Junyong;Hyun, Chang-Lim;Jee, Youngheun;Kang, Ki Soo
    • Journal of Korean Medical Science
    • /
    • v.33 no.52
    • /
    • pp.336.1-336.12
    • /
    • 2018
  • Background: We aimed to investigate mucosal immunity related to forkhead box P3 ($FOXP3^+$) regulatory T (Treg) cells, T helper 17 (Th17) cells and cytokines in pediatric inflammatory bowel disease (IBD). Methods: Mucosal tissues from terminal ileum and colon and serum samples were collected from twelve children with IBD and seven control children. Immunohistochemical staining was done using anti-human FOXP3 and anti-$ROR{\gamma}t$ antibodies. Serum levels of cytokines were analyzed using a multiplex assay covering interleukin $(IL)-1{\beta}$, IL-4, IL-6, IL-10, IL-17A/F, IL-21, IL-22, IL-23, IL-25, IL-31, IL-33, interferon $(IFN)-{\gamma}$, soluble CD40L, and tumor necrosis factor-${\alpha}$. Results: $FOXP3^+$ Treg cells in the lamina propria (LP) of terminal ileum of patients with Crohn's disease were significantly (P < 0.05) higher than those in the healthy controls. $ROR{\gamma}t^+$ T cells of terminal ileum tended to be higher in Crohn's disease than those in the control. In the multiplex assay, serum concentrations (pg/mL) of IL-4 ($9.6{\pm}1.5$ vs. $12.7{\pm}3.0$), IL-21 ($14.9{\pm}1.5$ vs. $26.4{\pm}9.1$), IL-33 ($14.3{\pm}0.9$ vs. $19.1{\pm}5.3$), and $IFN-{\gamma}$ ($15.2{\pm}5.9$ vs. $50.2{\pm}42.4$) were significantly lower in Crohn's disease than those in the control group. However, serum concentration of IL-6 ($119.1{\pm}79.6$ vs. $52.9{\pm}39.1$) was higher in Crohn's disease than that in the control. Serum concentrations of IL-17A ($64.2{\pm}17.2$ vs. $28.3{\pm}10.0$) and IL-22 ($37.5{\pm}8.8$ vs. $27.2{\pm}3.7$) were significantly higher in ulcerative colitis than those in Crohn's disease. Conclusion: Mucosal immunity analysis showed increased $FOXP3^+$ T reg cells in the LP with Crohn's disease while Th17 cell polarizing and signature cytokines were decreased in the serum samples of Crohn's disease but increased in ulcerative colitis.

A Study on Safety and Performance Evaluation to Shaver Type Rope Cutter for Ships (선박용 Shaver Type 로프절단장치의 안전성 및 성능평가에 관한 연구)

  • Kang, Sung-Hoon;Ko, Jae-Yong
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.28 no.4
    • /
    • pp.632-638
    • /
    • 2022
  • As Korean coastal activity is high, the incidence of accidents caused by marine waste is extensive. An accident in which marine floating waste ropes and fishing nets are wound around the propeller of a sailing ship is termed "Rope wrapped accident." To prevent such accidents, this study applied the Finite Element Method (F.E.M.) for performance evaluation of the shaver type cutter, commercialized in Korea, through a structural safety review and water tank test. The results demonstrate that all parts constituting the rope cutter were damaged before reaching 0.5s, and the safety factor of each part was found to be at least 2 based on the maximum stress generated compared to the tensile strength. In the basin test, the cutting process of the shaver type rope cutter was reviewed, and the installation angle was set for each case considering that the rope floating in the sea actually enters at various angles. Consequently, as it was successful at cutting in all the cases, it can be concluded that there will be no problem in cutting the rope regardless of the mounted angle of the cutting blade.

Environmental Damage to Nearby Crops by Hydrogen Fluoride Accident (불화수소 누출사고 사례를 통한 주변 농작물의 환경피해)

  • Kim, Jae-Young;Lee, Eunbyul;Lee, Myeong Ji
    • Korean Journal of Environmental Agriculture
    • /
    • v.38 no.1
    • /
    • pp.54-60
    • /
    • 2019
  • BACKGROUND: Hydrogen fluoride is one of the 97 accident preparedness substances regulated by the Ministry of Environment (Republic of Korea) and chemical accidents should be managed centrally due to continual occurrence. Especially, hydrogen fluoride has a characteristic of rapid diffusion and very toxic when leaking into the environment. Therefore, it is important to predict the impact range quickly and to evaluate the residual contamination immediately to minimize the human and environmental damages. METHODS AND RESULTS: In order to estimate the accident impact range, the off-site consequence analysis (OCA) was performed to the worst and alternative scenarios. Also, in order to evaluate the residual contamination of hydrogen fluoride in crop, the samples in accident site were collected from 15-divided regions (East direction from accident sites based on the main wind direction), and the concentration was measured by fluoride ($F^-$) ion-selective electrode potentiometer (ISE). As a result of the OCA, the affected distance by the worst scenario was estimated to be >10 km from the accident site and the range by the alternative scenario was estimated to be about 1.9 km. The residual contamination of hydrogen fluoride was highest in the samples near the site of the accident (E-1, 276.82 mg/kg) and tended to decrease as it moved eastward. Meanwhile, the concentrations from SE and NE (4.96~28.98 mg/kg) tended to be lower than the samples near the accident site. As a result, the concentration of hydrogen fluoride was reduced to a low concentration within 2 km from the accident site (<5 mg/kg), and the actual damage range was estimated to be around 2.2 km. Therefore, it is suggested that the results are similar to those of alternative accident scenarios calculated by OCA (about 1.9 km). CONCLUSION: It is difficult to estimate the chemical accident-affecting range/region by the OCA evaluation, because it is not possible to input all physicochemical parameters. However simultaneous measurement of the residual contamination in the environment will be very helpful in determining the diffusion range of actual chemical accident.

Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy - (산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)-)

  • Lee, Sung-Yoon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.2 no.4
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

Studies on the Mechanical Properties of Weathered Granitic Soil -On the Elements of Shear Strength and Hardness- (화강암질풍화토(花崗岩質風化土)의 역학적(力學的) 성질(性質)에 관(關)한 연구(硏究) -전단강도(剪斷强度)의 영향요소(影響要素)와 견밀도(堅密度)에 대(對)하여-)

  • Cho, Hi Doo
    • Journal of Korean Society of Forest Science
    • /
    • v.66 no.1
    • /
    • pp.16-36
    • /
    • 1984
  • It is very important in forestry to study the shear strength of weathered granitic soil, because the soil covers 66% of our country, and because the majority of land slides have been occured in the soil. In general, the causes of land slide can be classified both the external and internal factors. The external factors are known as vegetations, geography and climate, but internal factors are known as engineering properties originated from parent rocks and weathering. Soil engineering properties are controlled by the skeleton structure, texture, consistency, cohesion, permeability, water content, mineral components, porosity and density etc. of soils. And the effects of these internal factors on sliding down summarize as resistance, shear strength, against silding of soil mass. Shear strength basically depends upon effective stress, kinds of soils, density (void ratio), water content, the structure and arrangement of soil particles, among the properties. But these elements of shear strength work not all alone, but together. The purpose of this thesis is to clarify the characteristics of shear strength and the related elements, such as water content ($w_o$), void ratio($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$), and the interrelationship among related elements in order to decide the dominant element chiefly influencing on shear strength in natural/undisturbed state of weathered granitic soil, in addition to the characteristics of soil hardness of weathered granitic soil and root distribution of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands. For the characteristics of shear strength of weathered granitic soil and the related elements of shear strength, three sites were selected from Kwangju district. The outlines of sampling sites in the district were: average specific gravity, 2.63 ~ 2.79; average natural water content, 24.3 ~ 28.3%; average dry density, $1.31{\sim}1.43g/cm^3$, average void ratio, 0.93 ~ 1.001 ; cohesion, $ 0.2{\sim}0.75kg/cm^2$ ; angle of internal friction, $29^{\circ}{\sim}45^{\circ}$ ; soil texture, SL. The shear strength of the soil in different sites was measured by a direct shear apparatus (type B; shear box size, $62.5{\times}20mm$; ${\sigma}$, $1.434kg/cm^2$; speed, 1/100mm/min.). For the related element analyses, water content was moderated through a series of drainage experiments with 4 levels of drainage period, specific gravity was measured by KS F 308, analysis of particle size distribution, by KS F 2302 and soil samples were dried at $110{\pm}5^{\circ}C$ for more than 12 hours in dry oven. Soil hardness represents physical properties, such as particle size distribution, porosity, bulk density and water content of soil, and test of the hardness by soil hardness tester is the simplest approach and totally indicative method to grasp the mechanical properties of soil. It is important to understand the mechanical properties of soil as well as the chemical in order to realize the fundamental phenomena in the growth and the distribution of tree roots. The writer intended to study the correlation between the soil hardness and the distribution of tree roots of Pinus rigida Mill. planted in 1966 and Pinus rigida ${\times}$ taeda in 199 to 1960 in the denuded forest lands with and after several erosion control works. The soil texture of the sites investigated was SL originated from weathered granitic soil. The former is situated at Py$\ddot{o}$ngchangri, Ky$\ddot{o}$m-my$\ddot{o}$n, Kogs$\ddot{o}$ng-gun, Ch$\ddot{o}$llanam-do (3.63 ha; slope, $17^{\circ}{\sim}41^{\circ}$ soil depth, thin or medium; humidity, dry or optimum; height, 5.66/3.73 ~ 7.63 m; D.B.H., 9.7/8.00 ~ 12.00 cm) and the Latter at changun-long Kwangju-shi (3.50 ha; slope, $12^{\circ}{\sim}23^{\circ}$; soil depth, thin; humidity, dry; height, 10.47/7.3 ~ 12.79 m; D.B.H., 16.94/14.3 ~ 19.4 cm).The sampling areas were 24quadrats ($10m{\times}10m$) in the former area and 12 in the latter expanding from summit to foot. Each sampling trees for hardness test and investigation of root distribution were selected by purposive selection and soil profiles of these trees were made at the downward distance of 50 cm from the trees, at each quadrat. Soil layers of the profile were separated by the distance of 10 cm from the surface (layer I, II, ... ...). Soil hardness was measured with Yamanaka soil hardness tester and indicated as indicated soil hardness at the different soil layers. The distribution of tree root number per unit area in different soil depth was investigated, and the relationship between the soil hardness and the number of tree roots was discussed. The results obtained from the experiments are summarized as follows. 1. Analyses of simple relationship between shear strength and elements of shear strength, water content ($w_o$), void ratio ($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$). 1) Negative correlation coefficients were recognized between shear strength and water content. and shear strength and void ratio. 2) Positive correlation coefficients were recognized between shear strength and dry density. 3) The correlation coefficients between shear strength and specific gravity were not significant. 2. Analyses of partial and multiple correlation coefficients between shear strength and the related elements: 1) From the analyses of the partial correlation coefficients among water content ($x_1$), void ratio ($x_2$), and dry density ($x_3$), the direct effect of the water content on shear strength was the highest, and effect on shear strength was in order of void ratio and dry density. Similar trend was recognized from the results of multiple correlation coefficient analyses. 2) Multiple linear regression equations derived from two independent variables, water content ($x_1$ and dry density ($x_2$) were found to be ineffective in estimating shear strength ($\hat{Y}$). However, the simple linear regression equations with an independent variable, water content (x) were highly efficient to estimate shear strength ($\hat{Y}$) with relatively high fitness. 3. A relationship between soil hardness and the distribution of root number: 1) The soil hardness increased proportionally to the soil depth. Negative correlation coefficients were recognized between indicated soil hardness and the number of tree roots in both plantations. 2) The majority of tree roots of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands distributed at 20 cm deep from the surface. 3) Simple linear regression equations were derived from indicated hardness (x) and the number of tree roots (Y) to estimate root numbers in both plantations.

  • PDF