• 대한조선학회지
• /
• 제24권3호
• /
• pp.25-34
• /
• 1987

Whereas the finite element method is well established today, the boundary element method is a fairly recent development. Both are general-purpose methods for the solution of various structural analysis problem. The B.E.M has several potential advantages relative to the F.E.M. One of them is that the number of unknowns in algebraic system obtained by discretization is proportional to the number of boundary nodes. Anothor advantage is the ease of discretization and input data preparation. However, the B.E.M. always leads to a fully populated and unsymmetric system of equations. Even though the number of degree-of-freedom is reduced as compared with F.E.M, since nodes exist on the boundary only in the B.E.M, to follow that the effort to solve the equations can be greater. It has been shown also that the time spent in setting up the coefficient matrix is a significant and can, in some cases, be greater than the time required to solve the equation. Thus, one can naturally consider the idea that two methods should be coupled, then the advantages of both methods can be taken. And further, by using this coupling method the HATCH CORNER was analyzed to give initial design data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.855-858
• /
• 2001

The single transformer appeared the electro-magnetic force must be constructed to support it. it must construct the single transformer to supporting the electro-magnetic force appeared by the cut-off current. the problem is that the electro-magnetic occurs the modification of the single transformer and an serious accident. In the case of the molding-transformer, the part of the molding cast used in the construction occurs the crack, because of the strong force. therefore, in this paper, the molding material used in the molding-transformer is settled by comparing the results from commercial soft ware of F.E.M and a out-equipment circuit.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.586-591
• /
• 2001

In the cold forging, elastic deformation of the die has been investigated to improve the accuracy of cold forged parts with F.E.M analysis using DEFORM, and with experiments using strain gauges. In the experiments, initial billet was selected to easily find the effect of elastic deformation according to the forging modes, extrusion and upsetting type, and only extrusion type. Elastic deformation of the die can be obtained by the signal from the strain gauges and this signal can be amplified by data acquisition system during the process. In the F.E.M analysis, two types of analysis are used to predict elastic strain of the die. To improve an accuracy of forged product and die dimension, this study compared with strain distribution between experiment and F.E.M analysis. As a result, the history of the deformation of the die and elastic recovery of forged product can be obtained by the elastic strain analysis of forged product and die according to the forging modes.

• 통상정보연구
• /
• 제12권2호
• /
• pp.59-83
• /
• 2010

The purposes of the study is to evaluate the discrepancy between user's expectation and satisfaction degree in the service of uTradeHub. In this regard, this study infers general solutions in order to induce the intersection area using IPA technique. Then this paper will present directions to improve the service of uTradeHub. In terms of methodology, this article disclosed that IPA model approach is greatly useful to evaluate user's attribute. First, variables like the link of different works(f1), trust of system(f4), information connection(f7) are located on the first quadrant. This means that importance and satisfaction are all high variables for user. So, this is very important variables that need continuous administration in order to maintain present state. Second, variables such as the speed of information acquisition(f2), improvement of use(f3), stability of system(f5) are located on the second quadrant. This means that user's importance is high but user's satisfaction is low. Therefore, this area needs an active improvement strategy and quick maintenance for e-Trade application. Third, variables like the appropriateness of information usage fees(f8), easy subscription(f9), customer support service(f10) are located on the third quadrant. Because these variables are all low for user's importance and satisfaction, we have to arrange strong and radical remedy for e-Trade service. Finally, variables like information offer(f6) are located on the fourth quadrant. This means that user's satisfaction is high but user's importance is low. The research result suggests that e-Trade service development would be re-organised as much as user feels the importance of process innovation.

• 한국광학회지
• /
• 제8권1호
• /
• pp.19-25
• /
• 1997

Agfa 8E75HD 사진건판에서 얻은 dichromated gelatin(DCG) 박막에 구면파와 평면파를 간섭시켜 holographic zone plate(HZP)를 만들었다. DCG박막의 비서형적인 광학특성들을 고려하여 HZP의 이론식을 유도하였다. 이 이론식에 의한 HZP의 초점거리를 거리는 f. f/2, f/3, f/4, ... 였으며, 실험적으로도 평면파를 입사하여 6개까지의 해당 초점들을 관측하였다. 칼날 주사 방법으로 측정한 첫 번째 재생 초점 근처에서의 빔의 모양은 Gaussian 분포를 가짐을 확인하였다.

• 말소리와 음성과학
• /
• 제2권3호
• /
• pp.75-80
• /
• 2010

The present research investigated the characteristics of voice between genders and nationalities by measuring the acoustic parameter values of Korean and Chinese students. Sound Forge was used to collect voice samples and Praat was used to measure and analyze jitter, shimmer, NHR, $sF_0$, and pitch range. The results of this research are a follows. First, during prolongation of the vowels, there was no significant difference in $F_0$ between Korean and Chinese males and Korean and Chinese females. Korean males and females had higher $F_0$ values than Chinese males and females. Secondly, during sentence reading, there was no significant difference between Korean and Chinese males in $sF_0$. But between female groups, there was a significant difference in $sF_0$. Thirdly, during sentence reading, the pitch range in Korean males was found to be narrower compared to Korean and Chinese females who had wider pitch range, showing a significant difference. Fourthly, jitter in the five vowels /a, i, u, e, o/ was found to be higher in Chinese than Korean subjects. In the vowels /a, e, u/ females were higher than males showing a significant difference. Fifthly, shimmer in the vowels /a, e, u/ was found to be higher in Chinese than Korean subjects showing a significant difference. Finally, NHR in the vowels /a, u, o/ was found to be higher in Chinese than Korean subjects showing a significant difference.

• 대한물리의학회지
• /
• 제10권1호
• /
• pp.1-7
• /
• 2015

PURPOSE: The aim of this study was to investigate the effects of distal movement on shoulder muscle activation during diagonal pattern of exercises. METHODS: Seventeen healthy male participants volunteered to participate. Five muscles of shoulder were investigated during standing performance of diagonal shoulder exercises with and without visual trace. Two patterns of the diagonal exercises were used as diagonal 1 flexion and extension (D1F-E), and diagonal 2 flexion and extension (D2F-E). Two way repeated measures analysis of variance was used, which the factor was the presence of distal movement and exercise variations. RESULTS: The average muscle activity values of the lower trapezius and anterior deltoid are higher with the D2F-E, compared to the D1F-E (p<.05). The distal movement effect was observed within included all muscles except the lower trapezius, which the values are significantly greater in exercise with distal movement (P<.05). All significant increase of the muscles during the exercise with distal movement condition showed over 0.9 for the observed power in present study. CONCLUSION: Present result suggested that the diagonal pattern of exercise with distal movement has additional advantages of activating the scapulothoracic muscle as well as glenohumeral muscles. In addition, the D2F-E exercise pattern is effective for activating lower trapezius and anterior deltoid muscles.

• 약학회지
• /
• 제58권5호
• /
• pp.314-321
• /
• 2014

Cibotii Rhizoma, the dried rhizome of Cibotium barometz J. Smith (C. barometz), has long been used to treat bone or nervous system disorders. In this regard, we isolated three main phenolic compounds, onitin-4-O-${\beta}$-D-glucopyranoside (1), irisdichototins E & F epimeric mixture (2), and protocatechuic acid (3) from C. barometz methanol extract. In addition, we screened their antioxidative activities by DPPH, ABTS radical, and superoxide scavenging assays. Among these three compounds, irisdichototins E & F and protocatechuic acid showed strong antioxidant activities. Also, the antioxidant activities of the C. barometz extracts were proportional to the contents of irisdichototins E & F and protocatechuic acid, thus these two phenolic compounds could be main active compounds of C. barometz. In addition, onitin-4-O-${\beta}$-D-glucopyranoside is considered as a marker compound of C. barometz because this compound is specifically contained in C. barometz which belongs to Pteridophyta order. A rapid analysis method for the simultaneous determination of phenolic compounds was also developed by UPLC (Ultra Performance Liquid Chromatography). Using the developed method, the two active compounds (irisdichototins E & F and protocatechuic acid) and a marker compound (onitin-4-O-${\beta}$-D-glucopyranoside) were successfully quantified in 14 commercial samples that were collected from different regions.

• 한국동물위생학회지
• /
• 제41권4호
• /
• pp.257-262
• /
• 2018

Avian pathogenic E. coli (APEC) causes severe economic losses in the poultry farms, due to systemic infections leading to lethal colisepticemia. It causes a variety of diseases from air sac infection to systemic spread leading to septicemia. Secondary infection contains opportunistic infections due to immunosuppression disease. Collibacillosis causes the great problems in the poultry industry in Korea. Thus, it is necessary to identify and classify the characteristics of E. coli isolate of chicken origin to confirm the diversity of symptoms and whether they are transmitted among the farms. Fragment analysis is identify the difference in the number of Variable-Number Tandem-Repeats (VNTRs) for genotyping. VNTRs have repeating structure (Microsatellite, Short tandem repeats; STR, Simple sequence repeats; SSR) in the chromosome. This region can be used as a genetic marker because of its high mutation rate. And various lengths of the amplified DNA fragment cause the difference in the number of repetition of the DNA specific site. The number of repetition sequences indicates the separated size of fragments, so the each fragments can be distinguished by specific samples. The results of the sample show that there is no difference in six microsatellite loci (yjiD, aidB, molR_1, ftsZ, b1668, yibA). There are differences among the farms in relation of the number of repetitions of other six microsatellite loci (ycgW, yaiN, yiaB, mhpR, b0829, caiF). Four (ycgW, yiaB, b0829, caiF) of these six microsatellite loci show statistically significant differences (P<0.05). It means that the analysis using four microsatellite loci including ycgW, yiaB, b0829, and caiF can confirm among the farms. Five E. coli samples in one farm have same SSR repetition at all markers. But, there are significant differences from other farms at Four (ycgW, yiaB, b0829, caiF) microsatellite loci. These results emphasize again that the four microsatellite loci makes a difference in the amplified DNA fragments, enabling it to be used for E. coli genotyping.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권7호
• /
• pp.331-338
• /
• 2002

An inverter-fed induction is driven by a harmonic voltage source so that it is necessary to be analysed by time-stepping F.E.M. But it takes so long time that disadvantageous to design. This paper presents a simple analysis method for inverter-fed induction motor using FEM and harmonic equivalent circuit. First, the rotor bar resistance and the leakage reactance are determinated by FEA for 1 slot region in rotor to consider the skin effect and the saturation. Secondly, the characteristic of the motor is analyzed by the harmonic equivalent circuits consisting of the obtained parameters from the FEA. This method is carried out to analyze an induction motor driven by the sinusoidal voltage and the inverter. The results are verified by comparing with those of the time-step F.E.A and the experiment.