• Proceedings of the KWS Conference
• /
• 1990.11a
• /
• pp.153-154
• /
• 1990

• The Korean Journal of Ecology
• /
• v.14 no.3
• /
• pp.231-241
• /
• 1991

The analyses of correlation, enviromental gradient, continuum and polar ordination methods were used for studing on relationships between forest vegetation and their habitats in Mt. changan, chagsu-gun, korea. influencing correlation of moisture index to the main 41species from the study area they were composed of several groups by leading species of quercus mongoulica, that of carpinus tschonoskii and that of fraxinus mandshurica. On the other hand, it was found three communities in different habitats by environmental gradient i.e. each community of f. mandshurica, mangnolia sieboldii and hydrangea serrata for. acuminata have occurred in moist place, that of c. teschonoskii and q. serrata, in mesic and that of q. mongolica, q.variabilis, rhododendron schlippenbachii, in dry. in addition an occupied distribution area was investigated according to continuum index e.g. cornus controversa,betula costata,q. variabilis, q. serrata and q. mongolica over altitudinal 800m were distributed to a habitat were forming climax by q. mongolica, and/or c. controversa, f. mandshurica, q. serrata and c. tschonoskii under altitudinal 800m were done, by g. tschonoskii. while the forest vegetation of the area was classified into 6 communities such as q. mongolica community, q. variabilis community,q. serrata community, g. tschonoskii community,c. controversa community and f. mandshurica community by means of polar ordination analysis and these have come under the influence of environmental factors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.72-80
• /
• 2015

In this study, comparative analysis has been performed with regard to a bending stress and deformation at bottom slab of a concrete floating container terminal by live load distributions. In addition, a structural performance and behavior of the floating structure is considered using a numerical analysis. Through reviewed structural performance of a floating structure by live load distribution, the structure presented tensile behavior by two live load cases (A, B, D-type). Then, the other live load cases (C, E, F, G, H, I, J-type) shows compressive behavior. Especially, immoderately compressive stress was generated on bottom slab at specific load distribution. but, that should be decreased through controling buoyancy pre-flexion. Through reviewed structural behavior, slopes of structure by four live load cases (B, E, F, H-type) were exceeded in design criteria of mega-float. It should be estimated that it get out of the load case at loading container. In all, the present study can be considered as a benchmark of a floating container terminal in the absence of analysis and will be used to guide-line about serviceability of concrete floating container terminal.

• Speech Sciences
• /
• v.15 no.2
• /
• pp.131-141
• /
• 2008

The purpose of this study was to find out the acoustic variation on the pre-and post respiration and oral motor for children with cerebral palsy. Five children with spastic CP at the age of 6 in average were practiced by a caregiver at home each for 25 minutes, in total, 45 times. The sustained of vowel /a/ and vowels /a/, /i/, /u/, /e/, /o/ were recorded on CSL and MDVP and analyzed by acoustic parameters. As a result, the maximum phonation time(MPT) was increased from 2.06 to 6.31 and the formant of vowels(F1, F2, F3) had significant differences in F1(/a, i/), F2(/i.u.o/), and F3(/a/) between the controls and the children with CP in pre-treatment. The total average value of vowels had significant differences between the pre-and post-treatment (p< .05). The energy of vowels had significant differences in the vowels /i, u, e, o/ and the total average value between the pre-and post-treatment(p< .001). The jitter percent, shimmer percent, and noise to harmonic ratio had significant differences between the pre-and post-treatment(p< .05). As the respiration and the oral motor improved MPT, voice quality, and articulation of vowel, and the variation of the formant(F1, F2, F3) showed the changes in the shape of lips, the place and the height of the tongue, the various development of therapy programs and the consistent intervention of treatment is needed for the children with cerebral palsy.

• Journal of East-West Nursing Research
• /
• v.23 no.1
• /
• pp.75-85
• /
• 2017

Purpose: This study was conducted to examine the effects of Pericardium Kimek (K9) and Nei-Guan (P6) acupressure on relief of the anxiety, nausea, retching and physiologic changes (oxygen saturation, blood pressure, heart rate, temperature and respiration) in the patients undergoing unsedated esophagogastroduodenoscopy. Methods: A quasi-experimental research design was used. The participants were assigned into the listed three groups, i.e., the control group, the first experimental group (E1: K9 acupressure group) and the second experimental group (E2: P6 acupressure group). A total of 60 participants were included for analysis. Results: The severity of nausea (F=3.503, p=.037), the oxygen saturation (F=5.417, p=.007). and the respiration rate (F=7.270, p=.002) showed statistically significant differences in three groups. Conclusion: Based on the results of the present study, K9 acupressure with moxa pellets and P6 acupressure with wristbands (Sea-Band) are considered to be safe and an easy-to-apply intervention to relieve nausea and maintain the level of oxygen saturation and respiration rate in patients undergone unsedated esophagogastroduodenoscopy.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.96-103
• /
• 2009

The roll forming process is commonly used for the conventional 'Fe' metal products such as a furniture drawer guide or an up-down slide guide. Recently its applications are variously expanded to the sanitary facilities or electronic devices. It is essentially required the cleanness for the high technology application and any corrosion or rust are not allowed. Therefore, in those applications the stainless steel materials are strongly demanded as the substitution of 'Fe' steel. However the mechanical properties of stainless steel are not suitable for forming process compared with those of 'Fe' steel. Up to now, the conventional F.E.M.(Finite Element Method) has been used to analyze and design the roll forming process. The purpose of this research is to obtain the proper production process and the shape of rolls to manufacture the high precision slide rails made of stainless steel material. The commercial program, SHARPE-RF, is used to analyze the entire roll forming process. The results show that the rolling process and the roll design by F.E.M. are useful from the good agreement between the shapes of products estimated by F.E.M. and those of the actual products.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.4
• /
• pp.349-355
• /
• 2015

Through the recent accident, the checking of ultimate hull girder capacity for container ship should be needed. Smith’s method is well known as the only simplified method to access rapidly for ultimate hull girder capacity except very expensive nonlinear F.E approach. This simplified method, however, is admitted to apply only to bulker and tanker in accordance with Classification Rules up to now. The targets of this study are to verify effectiveness of the simplified method for container ship’s ultimate hull girder strength and to propose the safety factor considering the local bending in double bottom structures due to out of plane loads through the nonlinear F.E analyses. Two different sized ships and three loading conditions which are pure bending, homo-loading and one-bay empty condition were used for this study. Based on the F.E results, the present study showed that CSR’s simplified method is available for the ultimate hull girder strength of container ship and over 1.2 of safety factor should be applied to consider the local bending effect in double bottom structures due to out of plane loads such as sea pressure an cargo.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.84-89
• /
• 2014

Not only the emission regulation of on-road vehicle engine, but also emission regulation of off-road engine have been reinforced. It is the reason of wide application of emission reduction technology for off-road engines. In this study, optimization of engine parameters (Injector hole number, Injection timing and EGR rate) for reduction of NOx and smoke emissions were conducted by using the analysis of sensitivity and S/N ratio of Taguchi method(DOE). As results, this paper shows optimum value of the parameters for NOx and smoke emission reduction. From the result of reproducibility verification, it is final that the prediction value of NOx and smoke has the error of below 10%. Consequently, the method and results of this study will be used for quantitative reference to EGR control mapping in next study.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.5 no.1
• /
• pp.44-58
• /
• 1994

The formants of the 9 Korean standard vowels(which used by the average people of Seoul, central-area of the Korean peninsula) were measured by analysis with the linear predictive coding(LPC) and fast Fourier transform(FFT). The author already had reported the constriction area for the Korean standard vowels, and with the existing data, the distance from glottis to the constriction area in the vocal tract of each vowel was newly measured with videovelopharyngograms and lateral Rontgenograms of the vocal tract. We correlated the formant frequencies with the distance from glottis to the constriction area of the vocal tract. Also we tried to correlate the formant frequencies with the position of tongue in the vocal tract which is divided into 2 categories : The position of tongue in oral cavity by the distance from imaginary palatal line to the highest point of tongue and the position in pharyngeal cavity by the distance from back of tongue to posterior pharyngeal wall. This study was performed with 10 adults(male : 5, female : 5) who spoke primary 9 Korean standard vowels. We had already reported that the Korean vowel [i], [e], $[{\varepsilon}]$ were articulated at hard palate level, [$\dot{+}$], [u] were at soft palate level, [$\wedge$] was at upper pharynx level and the [$\wedge$], [$\partial$], [a] in a previous article. Also we had noted that the significance of pharyngeal cavity in vowel articulation. From this study we have concluded that ; 1) The F$_1$ is related with the oral cavity articulated vowel [i, e, $\varepsilon$, $\dot{+}$, u]. 2) Within the oral cavity articulated vowel [i, e, $\varepsilon$, $\dot{+}$, u] and the upper pharynx articulated vowel [o], the F$_2$ is elevated when the diatance from glottis to the constriction area is longer. But within the lower pharynx articulated vowel [$\partial$, $\wedge$, a], the F$_2$ is elevated when the distance from glottis to the constriction area is shorter. 3) With the stronger tendency of back-vowel, the higher the elevation of the F$_1$ and F$_2$ frequencies. 4) The F$_3$ and F$_4$ showed no correaltion with the constriction area nor the position of tongue in the vocal tract 5) The parameter F$_2$- F$_1$, which is the difference between F$_2$ frequency and F$_1$ frequency showed an excellent indicator of differenciating the oral cavity articulated vowels from pharyngeal cavity articulated vowels. If the F$_2$-F$_1$ is less than about 600Hz which indicates the vowel is articulated in the pharyngeal cavity, and more than about 600Hz, which indicates that the vowel is articulated in the oral cavity.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.204-210
• /
• 2000

The control of dissolved aluminum concentration in the hot dip zinc galvanizing bath is greatly important in producing galvannealed steel sheets. The purpose of present study is to provide basic data for measurement of the aluminum concentration in site in hot dip zinc bath at the temperature of $460^{\circ}C\~500^{\circ}C$ using $CaF_2$ solid electrolyte sensor with three kinds of reference electrode. Good workability and stability of the sensor were confirmed with the $Bi+BiF_3$ reference electrode from the emf measurement. In order to measure the aluminum concentration in Zn-Al bath, the galvanic cell of fluorine ion was constructed with $CaF_2$ solid electrolyte as follows; $$(-)W|Zn-Al,\;AlF_3|CaF_2|Bi,BiF_3|W(+)$$. The emf measurement was made at the temperature of $460\pm10^{\circ}C$ in the Zn-Al bath. The following correlationship between aluminum concentration and emf was obtained by the least square regression analysis; $$E/mV=56.795log[\%Al]+1881.7\;R=0.9704$$,$$0.026wt\%{\leq}[\%Al]{\leq}0.984wt\%$$