• Journal of Korean Public Health Nursing
• /
• v.19 no.1
• /
• pp.74-94
• /
• 2005

The purpose of this study was to compare the effect of education between CAI(Computer Assisted Instruction) and lectures for smoking cessation among male students who attended vocational high schools. Conducted from February 24th to April 26th, 2003, the study design was quasi-experimental with nonequivalent control group pretest-posttest design. The study subjects were 60 male students in K vocational high school in Daegu city, who were present smokers and had more than 7.0 ppm concentration level of carbon monoxide. Thirty students were randomly chosen as the experimental group which applied CAI education method for smoking cessation. The other 30 students served as the control group which received lecture education method of 40 minutes on four consecutive days. CAI education for smoking cessation was composed of ready-made individual learning contents, counseling by using cyber-communication, writing a letter to stop smoking, and writing a written agreement for smoking cessation. Lecture education for smoking cessation was composed of a ready-prepared lecture for the group, writing a letter to stop smoking, and writing a written agreement for smoking cessation. To measure smoking related knowledge, Jeong Ree Roh(1996)'s smoking related knowledge scale$(Cronbach's\;{\alpha}=0.84)$ was modified and used by the researcher. To measure smoking related attitude, Jeong Ree Roh(1996)'s smoking related attitude scale$(Cronbach's\;{\alpha}=0.91)$ was modified and used by the researcher. Smoking related knowledge scale's Cronbach's $\alpha$ was 0.83 in the pilot study and 0.93 in this study. Smoking related attitude scale's Cronbach's a was 0.80 in the pilot study and 0.98 in this study. To determine the smoking amount, the number of cigarettes smoked per day was checked. The concentration level of CO in the exhaled breath was measured (Micro CO Cat. No. MCO2, UK). Data was analyzed by $x^2-test$, t-test, repeated measures ANOVA. simple main effects, and time contrast test with SPSS/Win 11.0 program. The results of this study were as follows: 1. The first hypothesis. that 'Smoking-related knowledge score in the experimental group by using CAI education for smoking cessation will be higher than that in the control group by using lecture education for smoking cessation', was not supported. 2. The second hypothesis, that 'Smoking-related attitude in the experimental group by using CAI education for smoking cessation will be higher than that in the control group by using lecture education for smoking cessation'. was supported(F=6490.79. p=0.000). 3. The third hypothesis. that 'Smoking amount in the experimental group by using CAI education for smoking cessation will be less than that in the control group by using lecture education for smoking cessation'. was supported. 1) The third-1st sub-hypothesis. that 'The number of cigarettes smoked per day in the experimental group by using CAI education for smoking cessation will be less than that in the control group by using lecture education for smoking cessation'. was supported(F=134.19. p=0.000). 2) The third-2nd sub-hypothesis. that 'The concentration level of CO by ppm per one exhaled breath in the experimental group by using CAI education for smoking cessation will be lower than that in the control group by using lecture education for smoking cessation"' was supported(F=268.55. p=0.000). From the above results. CAI education can be an effective intervention to improve smoking-related knowledge and attitude. and to reduce the number of cigarettes smoked per day and the concentration level of CO by ppm per one exhaled breath. Lecture education can be effective to improve smoking-related knowledge. In the future, when CAI education and lecture education for smoking cessation are applied on the school nursing field. the students can gain a comprehensive understanding of smoking cessation, changes in smoking-related knowledge. smoking-related attitude and reducing smoking amount. Furthermore, CAI education for smoking cessation could be developed as an individual self initiative program and could give a guideline to apply CAI education for smoking cessation in other field.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.324-332
• /
• 2011

Purpose: The purpose of this study was to compare the stress distribution of teeth and jaw on load by differentiating property of materials according to each layer of widely used mouthguard. Materials and methods: A Korean adult having normal cranium and mandible was selected to examine. A customized mouthguard was constructed by use of DRUFOMAT plate and DRUFOMAT-TE/-SQ of Dreve Co. according to Signature Mouthguard system. The cranium was scanned by means of computed tomography with 1mm interval. It was modeled with CANTIBio BIONIX/Body Builder program and simulated and interpreted using Alter HyperMesh program. The mouthguard was classified as follows according to the layers. (1) soft guard (Bioplast)(SG) (2) hard guard (Duran)(HG) (3) medium guard (Drufomat)(MG) (4) soft layer + hard layer (SG + HG) (5) hard layer + soft layer (HG + SG) (6) soft layer + hard layer + soft layer (SG + HG + SG) (7) hard layer + soft layer + hard layer (HG + SG + HG) The impact locations on mandible were gnathion, the center of inferior border, and the anterior edge of gonial angle. And the impact directions were oblique ($45^{\circ}$). The impact load was 800 N for 0.1 sec. The stress distribution was measured at maxillary teeth, TMJ and maxilla. The statistics were conducted using Repeated ANOVA and in case of difference, Duncan test was used as post analysis. Results: In teeth and maxilla, the mouthguard contacting soft layer of mandibular teeth presented lowest stress measure and, in contrast, in condyle, the mouthguard contacting hard layer of mandibular teeth presented lowest stress measure. Conclusion: For all impact directions, soft layer + hard layer + soft layer, the mouthguard with three layers which the hard layer is sandwiched between two soft layers, showed relatively even distribution of stress in impact.

• Asia pacific journal of information systems
• /
• v.18 no.1
• /
• pp.79-96
• /
• 2008

One of the roles of the Semantic Web services is to execute dynamic intra-organizational services including the integration and interoperation of business processes. Since different organizations design their processes differently, the retrieval of similar semantic business processes is necessary in order to support inter-organizational collaborations. Most approaches for finding services that have certain features and support certain business processes have relied on some type of logical reasoning and exact matching. This paper presents our approach of using imprecise matching for expanding results from an exact matching engine to query the OWL(Web Ontology Language) MIT Process Handbook. MIT Process Handbook is an electronic repository of best-practice business processes. The Handbook is intended to help people: (1) redesigning organizational processes, (2) inventing new processes, and (3) sharing ideas about organizational practices. In order to use the MIT Process Handbook for process retrieval experiments, we had to export it into an OWL-based format. We model the Process Handbook meta-model in OWL and export the processes in the Handbook as instances of the meta-model. Next, we need to find a sizable number of queries and their corresponding correct answers in the Process Handbook. Many previous studies devised artificial dataset composed of randomly generated numbers without real meaning and used subjective ratings for correct answers and similarity values between processes. To generate a semantic-preserving test data set, we create 20 variants for each target process that are syntactically different but semantically equivalent using mutation operators. These variants represent the correct answers of the target process. We devise diverse similarity algorithms based on values of process attributes and structures of business processes. We use simple similarity algorithms for text retrieval such as TF-IDF and Levenshtein edit distance to devise our approaches, and utilize tree edit distance measure because semantic processes are appeared to have a graph structure. Also, we design similarity algorithms considering similarity of process structure such as part process, goal, and exception. Since we can identify relationships between semantic process and its subcomponents, this information can be utilized for calculating similarities between processes. Dice's coefficient and Jaccard similarity measures are utilized to calculate portion of overlaps between processes in diverse ways. We perform retrieval experiments to compare the performance of the devised similarity algorithms. We measure the retrieval performance in terms of precision, recall and F measure? the harmonic mean of precision and recall. The tree edit distance shows the poorest performance in terms of all measures. TF-IDF and the method incorporating TF-IDF measure and Levenshtein edit distance show better performances than other devised methods. These two measures are focused on similarity between name and descriptions of process. In addition, we calculate rank correlation coefficient, Kendall's tau b, between the number of process mutations and ranking of similarity values among the mutation sets. In this experiment, similarity measures based on process structure, such as Dice's, Jaccard, and derivatives of these measures, show greater coefficient than measures based on values of process attributes. However, the Lev-TFIDF-JaccardAll measure considering process structure and attributes' values together shows reasonably better performances in these two experiments. For retrieving semantic process, we can think that it's better to consider diverse aspects of process similarity such as process structure and values of process attributes. We generate semantic process data and its dataset for retrieval experiment from MIT Process Handbook repository. We suggest imprecise query algorithms that expand retrieval results from exact matching engine such as SPARQL, and compare the retrieval performances of the similarity algorithms. For the limitations and future work, we need to perform experiments with other dataset from other domain. And, since there are many similarity values from diverse measures, we may find better ways to identify relevant processes by applying these values simultaneously.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.583-594
• /
• 2000

The Middle Carboniferous Yobong Formation with North-South trending is distributed in the Yeongheungri and Samokri of Yeongwoleup, Kangwon Province, Korea. A light gray thick and massive pure limestone is developed in the middle part of the Yobong Formation and it has been exploited for a long time. This study was carried out to investigate the lithological characteristics and geochemical compositions of the limestones and to figure out how geologic structures control the disribution of the limestones of the formation. The limestones of the Yobong formation are characterized by the fine and dense textures and the light gray to light brown in color. The limestones are composed of crinoid fragments, small foraminifers, fusulinids, gastropods, ostracods, etc. Based on the amount of grains and matrix, the Yobong Limestone can be classified as fine packstones and wackestones. The chemical analysis of limestones of the Yobong Formation was carried out to measure the contents of CaO, MgO, Al$_2$O$_3$, Fe$_2$O$_3$ and SiO$_2$. The content of CaO ranges from 48.12 to 59.31% and its average is about 54.52%. The average content of MgO is about 0.32% and the coutents of Al$_2$O$_3$, Fe$_2$O$_3$ and SiO$_2$ are relatively low. The amounts of Al$_2$O$_3$, Fe$_2$O$_3$ and SiO$_2$ of the limestones vary according to the kinds of limestone and their stratigraphical horizons in the formation. Generally, the CaO content of the limestones of the Yobong Formation decreases towards the top of the formation. Using geometric and structural analysis, we determined five progressively overprinted phases of deformation recorded in the study area. The anticline and syncline formed during the first and fourth deformation had controlled the distribution pattern of the Yobong Limestone of the Yobong Formation. The structures of deformation D$_1$ consist of F$_1$ isoclinal folds and foliations. The D$_2$ deformation had formed the isoclinal interstratal F$_2$ folds and axial plane cleavages which are locally developed within mudstones. The structural elements of deformation D$_3$ are axial plane cleavages associated with recumbent F$_3$ folds. These structures are overprinted by meso-scale and regional F$_4$ folds which are regionally dominant. Finally, the structures of D$_5$ consist of the thrust faults and folds associated with the thrust faults.

• Management & Information Systems Review
• /
• v.39 no.1
• /
• pp.35-57
• /
• 2020

Recently, research F&E(Facilities and Equipment) have become very important as tools and means to lead the development of science and technology. The government has been continuously expanding investment budgets for R&D and research F&E, and the need for efficient operation and systematic management of research F&E built up nationwide has increased. In December 2010, The government developed and completed a standardized classification system for national research F&E. However, accuracy and trust of information classification are suspected because information is collected by a method in which a user(researcher) directly selects and registers a classification code in NTIS. Therefore, in the study, we analyzed linearly using linear discriminant analysis(LDA) and analysis of variance(ANOVA), to measure the classification accuracy for the standardized classification system(8 major-classes, 54 sub-classes, 410 small-classes) of the national research facilities and equipment established in 2010, and revised in 2015. For the analysis, we collected and used the information data(50,271 cases) cumulatively registered in NTIS(National Science and Technology Service) for the past 10 years. This is the first case of scientifically verifying the standardized classification system of the national research facilities and equipment, which is based on information of similar classification systems and a few expert reviews in the in-outside of the country. As a result of this study, the discriminant accuracy of major-classes organized hierarchically by sub-classes and small-classes was 92.2 %, which was very high. However, in post hoc verification through analysis of variance, the discrimination power of two classes out of eight major-classes was rather low. It is expected that the standardized classification system of the national research facilities and equipment will be improved through this study.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.318-324
• /
• 2004

Purpose: Philips GEMINI is a newly introduced whole-body GSO PET/CT scanner. In this study, performance of the scanner including spatial resolution, sensitivity, scatter fraction, noise equivalent count ratio (NECR) was measured utilizing NEMA NU2-2001 standard protocol and compared with performance of LSO, BGO crystal scanner. Methods: GEMINI is composed of the Philips ALLEGRO PET and MX8000 D multi-slice CT scanners. The PET scanner has 28 detector segments which have an array of 29 by 22 GSO crystals ($4{\times}6{\times}20$ mm), covering axial FOV of 18 cm. PET data to measure spatial resolution, sensitivity, scatter fraction, and NECR were acquired in 3D mode according to the NEMA NU2 protocols (coincidence window: 8 ns, energy window: $409[\sim}664$ keV). For the measurement of spatial resolution, images were reconstructed with FBP using ramp filter and an iterative reconstruction algorithm, 3D RAMLA. Data for sensitivity measurement were acquired using NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves after we confirmed that dead time loss did not exceed 1%. To measure NECR and scatter fraction, 1110 MBq of F-18 solution was injected into a NEMA scatter phantom with a length of 70 cm and dynamic scan with 20-min frame duration was acquired for 7 half-lives. Oblique sinograms were collapsed into transaxial slices using single slice rebinning method, and true to background (scatter+random) ratio for each slice and frame was estimated. Scatter fraction was determined by averaging the true to background ratio of last 3 frames in which the dead time loss was below 1%. Results: Transverse and axial resolutions at 1cm radius were (1) 5.3 and 6.5 mm (FBP), (2) 5.1 and 5.9 mm (3D RAMLA). Transverse radial, transverse tangential, and axial resolution at 10 cm were (1) 5.7, 5.7, and 7.0 mm (FBP), (2) 5.4, 5.4, and 6.4 mm (3D RAMLA). Attenuation free values of sensitivity were 3,620 counts/sec/MBq at the center of transaxial FOV and 4,324 counts/sec/MBq at 10 cm offset from the center. Scatter fraction was 40.6%, and peak true count rate and NECR were 88.9 kcps @ 12.9 kBq/mL and 34.3 kcps @ 8.84 kBq/mL. These characteristics are better than that of ECAT EXACT PET scanner with BGO crystal. Conclusion: The results of this field test demonstrate high resolution, sensitivity and count rate performance of the 3D PET/CT scanner with GSO crystal. The data provided here will be useful for the comparative study with other 3D PET/CT scanners using BGO or LSO crystals.

• Proceedings of the Technology Innovation Conference
• /
• 1996.12a
• /
• pp.265-295
• /
• 1996

This paper investigates empirically the relationship between various business portfolio properties (particularly technological properties) and chaebol′s performance using data on the 50 largest chaebols in Korea. In addition to the traditional indexes to measure diversification such as entropy index we calculated inter-industry technological similarity using R&D expenditure data by industry and 1990 Input-output Table in Korea, and obtained chaebol-level technological relatedness and internal transaction proportion from chaebols′business profile, inter-industry technological similarity and 1990 input-output table. We applied factor analysis on 13 business portfolio property indexes and showed that they could be grouped into 3 dimensions, diversification scope, inter-business relatedness and degree of vertical integration. In this paper, using 50 largest chaebols′financial data (1989-1994), we analyzed empirically the effect of business portfolio properties on ROS (Return On Sales) which is conventional index for firm performance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are significant and positively related to the deepened variable. Third, the interaction term between TR and VI is significant and negatively affects TFP growth, meaning that TR and VI are substitutes. These results suggest strategic directions on restructuring business portfolio. As VI is increased, chaebols will get more profit. A higher level of either TR or W will increase TFP growth rate. but increase in both TR and VI will have a negative effect on TFP growth. To summarize, certain business portfolio properties such as VI and TR can be considered "resources" themselves since they can affect profit rate and productivity growth. VI and TR have a synergy effect of change in profit rate and productivity growth. VI increases ROS and productivity growth, while TR increases productivity growth representing a technological synergy effect.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.420-425
• /
• 2008

The storage of rice polishing (RP) with and without addition of antioxidant for sixteen weeks and its effect on rancidity and metabolizable energy values during the summer season was determined. Fifteen Single Comb White Leghorn cockerels of approximately uniform age and weight were procured and kept in metabolic cages under standard feeding and management practices. Five force feeding trials were conducted. In the first trial, fresh RP with 0 weeks of storage (diet 1 and 2) was used followed by four feeding trials with 4 (diet 3, 4), 8 (diet 5, 6), 12 (diet 7, 8), and 16 (diet 9, 10) weeks of storage of RP. The same birds were used in all trails. The birds were fasted for a period of 21 h, followed by force feeding of 20 g of RP with and without antioxidant for all storage periods. The control/fasting group was also maintained to measure endogenous fecal losses. Excreta were collected after 48 h for the determination of AME and TME values of RP. Along with the biological trials, laboratory assay of the RP stored with and without antioxidant was conducted to measure the extent of rancidity in terms of Thiobarbituric acid value (TBA). The TBA values were affected (p<0.05) by storage period and the values increased when the storage period increased from 4 to 16 weeks. However, the TBA values were significantly reduced (p<0.05) when RP was stored after addition of antioxidant when compared with the values obtained from RP stored without antioxidant (diet 3 vs. 4, 5 vs. 6, 7 vs. 8, and 9 vs. 10). The AME MJ/kg and TME MJ/kg values of RP were neither affected by increase in storage period nor addition of antioxidant. The findings of this study revealed that there was no effect of rancidity and storage time on the nutritive value, AME or TME of RP in poultry. However, TBA values were increased with the increase in storage period.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.263-269
• /
• 2016

BACKGROUND: The personal protective equipments (PPEs) is the most important factor for reducing the pesticide exposure during the preparation and spraying of pesticides. This study was to investigate the retention, repellence and penetration of protective clothing of PPEs according to the ISO 22608 'Liquid penetration resistance-pipette test. Protective clothing for agriculture worker is very important for their health. However, test method for measurement of protective clothing is not presented in Korea. METHODS AND RESULTS: In order to measure the retention, repellence and penetration of protective clothing, a apparatus for pipette method in accordance with the ISO Guideline was prepared. The test was conducted at $25{\pm}5^{\circ}C$, $60{\pm}10%$ of relative humidity and pipette applied to a apparatus was validated to take exact amount(0.2 mL). The retention, repellence and penetration of five types of protective clothing and one type of shirt were analyzed by GC/MS. Pendimethalin(5% a.i, emulsion) was used as a test pesticide to measure above factors. The retention were less than 11.0% with the exclusion of two types(F4 and shirt) and the repellency was more than 67.0% with the exclusion of shirt material. The penetration was less than 5.4%, however, that of shirt was 66.7%. CONCLUSION: This results indicated that all protective clothing were suitable to use as PPEs according to the criteria specified by ISO Guide 22608. However, shirt was not suitable due to high penetration. This test method established for measurement the retention, repellence and penetration of protective clothing will help to establish the test notice of pipette method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.116-124
• /
• 2011

In this study, a new method to estimate the bridge deflection is developed by using Wireless Tilt Sensor. Most of evaluations of structural integrity, it is very important to measure the geometric profile, which is a major factor representing the global behavior of civil structure, especially bridges. In the past, Because of the lack of appropriate methods to measure the deflection curve of bridges on site, the measurement of deflection had been done restrictly within just a few discrete points along the bridge. Also the measurement point could be limited to locations installed with displacement transducers. So, in this study, the deflection of the structure was measured by wireless tilt sensor instead of LVDT(Linear Variable Differential Transformer). Angle change of tilt sensor shows structural behavior by the change of the resistor values which is presented to voltage. Moreover, the maximum deflection was calculated by changing the deflection angle which was calculated as V(measured voltage) ${\times}$F(factor) to deflection. The experimental tests were carried out to verify the developed deflection estimation techniques. Because the base of tilt measuring is the gravity, uniform measurement is possible independent of a measuring point. Also, measuring values were showed very high accuracy.