• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국산림과학회지
• /
• 제13권1호
• /
• pp.25-39
• /
• 1971

약배양(葯培養)에 의(依)한 반수체식물(半數體植物)의 유기(誘起)가 돌연변이(突然變異), 유전학등(遺傳學等)의 기초연구(基礎硏究)나 실지육종사업(實地育種事業)에 혁신(革新)을 갖져올 수 있다는 사실(事實)이 알려지자 최근(最近) 2-3년간(年間) 이에 대(對)하여 많은 연구(硏究)가 시도(試圖)되었지만 현재(現在)까지 성공(成功)된 식물(植物)의 종류(種類)는 수종(數種)에 불과(不過)하다. 식물(植物)의 여러조직배양법(組織培養法) 중(中)에서도 약배양(葯培養)이 특(特)히 힘든것은 이 경우(境遇)에는 환원소포자(還元小胞子)에서 Callus가 embryoid를 유기(誘起)하여야만 되기 때문이다. 과수(果樹)와 화목류(花木類) 4속(屬) 7종(種)의 식물(植物)을 대상(對象)으로 약배양(葯培養)을 시도(試圖)하였다. 배양약(培養葯)은 대개(大槪) 4분자(分子)에서 늦은 소포자기(小胞子期)의 것을 혼합(混合)하여 사용(使用)하였고 배양기(培養基)는 Modified murashige and skoog의 배지(培地)를 기본배지(基本培地)로 하고 여기에 NAA, $2{\cdot}4$-D, YE, Kinetin등(等) 생장조절물질(生長調節物質)을 농도(濃度)와 조합(組合)을 달리한것을 첨가(添加)하여 만들었다. 재료(材料)의 취급(取扱), 멸균배양(滅菌培養)에 따른 여러조작(操作), 조직표본작성등(組織標本作成等) 모든것은 상법(常法)에 의(依)하였다. 이제 성적(成績)을 요약(要略)하면 다음과 같다. 1. Callus는 개나리, 진달래, 산철쭉, 살구 등(等)에서 형성(形成)되었고 복숭아, 배, 자두에서는 안생긴다. 2. Auxin Kinetin의 종류(種類)와 농도(濃度)를 달리한 여러 배양기(培養基)를 사용(使用)하였지만 Callus형성(形成)은 어느 것에서나 잘된다. 3. 개나리에서는 Callus는 약표면(葯表面), 약격부위(葯隔部位)에서 체세포기원(體細胞起源)의 2배성(倍性) Callus가 생기고 소포자(小胞子)에서는 안생긴다. 오래 배양(培養)된 소포자(小胞子)에서는 대부분(大部分) 전분(澱粉)이 축적(蓄積)된다. 4. 진달래에서는 화사(花絲), 약격(葯隔), 약내동(葯內童) 등(等)에서 체세포성(體細胞性) Callus가 형성(形成)되고 소포자기원(小胞子期源)의 Callus는 안생기고 소포자(小胞子)에는 전분(澱粉)이 축적(蓄積)된다. 5. 산철쭉은 Callus형성(形成)이 화사(花絲), 약격등(葯隔等)에서도 생기지만 주(主)로 화사반대편(花絲反對便)의 약이첨단(葯耳尖端)에서 잘생긴다. 소포자기원(小胞子期源)의 Callus는 안생기고 소포자(小胞子) 전분(澱粉)이 축적(蓄積)되는 점(點)은 진달래와 같다. 6. 살구는 체세포성(體細胞性) 약조직기원(葯組織起源)의 Callus는 거이 안생기고 Callus는 약강내부(葯腔內部)에서 형성(形成)되어 약봉합부(葯縫合部)를 헤치고 나온다. 오래 배양(培養)된 소포자(小胞子)에도 전분(澱粉)은 축적(蓄積)되지 않는다. 7. 복숭아, 배, 자두 들에서는 60여일배양(餘日培養)된 약(葯)의 어느 부위(部位)에서도 Callus는 형성(形成)되지 않는다. 반면(反面) 소포자(小胞子)에 전분축적(澱粉蓄積)도 안되는것이 특징(特徵)이다. 8. 체세포(體細胞) Callus는 주(主)로 약벽내피(葯壁內被), 두 약강(葯腔)사이의 격막(隔膜), 약격(葯隔) 및 약이유조직등(葯耳柔組織等)에서 생긴다. 9. 살구의 약조직(葯組織)은 배양중(培養中) 별(別)로 변화(變化)가 안되지만 소포자(小胞子)는 변화(變化)하야 다핵소포자(多核小胞子), 다조포체(多組胞體)들이 약강내(葯腔內)에 출현(出現)한다. 이런 현상(現像)은 살구의 Callus는 소포자기원(小胞子期源) 이라는것을 표시(表示)해준다. 10. 7종(種)의 식물중(植物中) 살구만은 환원성(還元性) 소포자(小胞子) Callus가 생기고 기타(基他)의 식물(植物)들은 약(葯)의 체세포성(體細胞性) 조직(組織)에서 Callus가 형성(形成)되기 때문에 반수체육종(半數體育種)의 가능성(可能性)은 살구에서만 있다.

• 한국잠사곤충학회지
• /
• 제9권
• /
• pp.67-87
• /
• 1969

1. 본 조사는 현재 우리나라에 보존되어 있는 계통을 전부 수집하여 Virus병에 대한 저항성을 계통별로 조사함으로써 잠견생산에 막대한 피해를 주는 Virus병에 대하여 저항성이 강한 계통을 선발하는 동시에 선발된 결과는 앞으로 저항성품종 육성제료로 삼고저 하였다. 2. 가잠의 핵형다각체 Virus병에 대하여 저항성이 강한 계통은 N$_4$, N$_{6}$, N$_{46}$, $C_{85}$, E$_{111}$로써 log ED$_{50}$ 값이 0.799~1.611 범위내에 있으며 강한 계통으로서는 N$_{10}$, $C_{62}$, N$_{70}$, N$_{79}$, $C_{106}$이고 log ED$_{50}$의 값은 5.159~7.258 범위내에 있다(표 4참조) 그러고 일본계통이 가장 강하여 log ED$_{50}$이 3.770이 3.770이고 중국계통의 log ED$_{50}$은 3.564로서 다음이고 가주계통의 log ED$_{50}$이 3.381로서 가장 강한 계통으로 나타났다. 감염율의 회귀방정식의 방향계수는 0.1~0.6범위로서 우리나라 보존계통의 저항성의 균일성이 비교적 작을 경향을 다타냈다. ra계통별 저항성의 유전현상에 대한 해명과 품질육성을 위한 구체적인 응용방법에 관한 구명은 차후의 숙제로 남게 되었다. 3. 잠체의 수분 및 회분과 Virus병에 대한 저항성과는 상관관계가 없었고(표 8참조) 다만 감잠비율(보통 사육법에 의하여 조사된 것)과는 고도의 상관관계가 있다. 즉 4면 기잠에서는 수분 및 회분과는 관계가 없었고 3면 기잠에서는 수분은 +0.326 회분은 +0.326으로서 고도의 유의성을 나타냈고 1면과 2면의 회분에서는 각각 +0.520과 ＋386으로서 고도의 유의성을 나타냈으나 수분에서는 유의성이 없었다(표7 참조). 4. 교배조간에 있어서는 기호 205가 모든 형질에 있어서 가장 우수하였다. 특히 204는 강건성이 매우 좋았으나 견질에 있어서 대조구보다 약간 떨어진다. 기호 212는 견질을 약간 떨어지고 감잠비율은 보통이나 수견량이 공시품종중 가장 많았다(표 11). 5. 종합적으로 기술하면 Virus에 대한 저항성이 강한 상기 몇 계통은 강건성 품종？성을 위한 기초자료가 될것이며 계속 여러 계통외 특성을 조사하여 특성 보존을 위한 품종보존의 완벽을 기하여야겠다.다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권23호
• /
• pp.10061-10066
• /
• 2015

Background: The aetiological relationship between human papillomavirus (HPV) infection and cervical cancer (CC) is widely accepted. Our goal was to determine the prevalence of HPV types in Mexican women attending at the Mexican Institute for Social Security from different areas of Mexico. Materials and Methods: DNAs from 2,956 cervical samples were subjected to HPV genotyping: 1,020 samples with normal cytology, 931 with low-grade squamous intraepithelial lesions (LGSIL), 481 with high grade HGSIL and 524 CC. Results: Overall HPV prevalence was 67.1%. A total of 40 HPV types were found; HPV16 was detected in 39.4% of the HPV-positive samples followed by HPV18 at 7.5%, HPV31 at 7.1%, HPV59 at 4.9%, and HPV58 at 3.2%. HPV16 presented the highest prevalence both in women with altered or normal cytology and HPV 18 presented a minor prevalence as reported worldwide. The prevalence ratio (PR) was calculated for the HPV types. The analysis of PR showed that HPV16 presents the highest association with CC, HPV 31, -33, -45, -52 and -58 also demonstrating a high association. Conclusions: The most prevalent HPV types in cervical cancer samples were -16, -18, -31, but it is important to note that we obtained a minor prevalence of HPV18 as reported worldwide, and that HPV58 and -52 also were genotypes with an important prevalence in CC samples. Determination of HPV genotypes is very important in order to evaluate the impact of vaccine introduction and future cervical cancer prevention strategies.

• 한국통신학회논문지
• /
• 제3권1호
• /
• pp.28-30
• /
• 1978

사회적 유대와 인류공동체로서 통신작용은 수시 도처에서 인류생활과 밀착고 있다. 모든 통신작용은 그 주체인 인력과 그 이해 및 이용방법올 배양전수(傳授)하는 통신교육에 의하여 유지되고 개발되는 것이다. 통신작용은 기술적 요소를 포함 하지만 사회과정 또는 사회작용의 범주에 속함을 본질로 하기 때문에 사회적 요건을 겸비해야함을 원리로 하고 있다. 따라서 통신교육은 기술적인 내용과 사회적인 지식을 함께 포괄한 종합과학적인 시청에서 시도되고 실천되어야 할 독특성을 갖이고 있다. 그러나 최근 이 교육이 기술적 비중을 늘이면서 사회적 측면을 줄이는 불균형을 강요당함에 따라 그 본질적 속성과 독특성을 변질 혹은 상실해가는 위기롤 파생시키고 있다. 즉, 일개분과에 불과한 기술만으로서는 $\ulcorner$통신$\lrcorner$이라는 독자적 사회성과 통합과학성을 감당할 수도 없거니와 $\ulcorner$통신$\lrcorner$을 총체적으로 표징(養徵)할 수도 없는 1개요소에 그치고 말기 때문에 교육적체제의 주체성이냐 자율성은 고사하고 타에 종속돼 버리거나 부수하게되는 것으로 귀착되고 만다. 결국 $\ulcorner$통신영역$\lrcorner$이 자주성을 잃어가는 요인은 바로 이러한 경향에서 조성되거나 파생되고 있다고 볼 수 있는 것이다. 원래 통신학은 중충 다분과척(重層多分科的)인 현대과학의 원천이며 그 모체일 뿐 아니라 그 자체의 속성 이 인문, 사회 및 기솔 둥 분과를 포괄, 통합한 종합과학임이 그 원리이다. 그러므로 통신교육은 이 다원적 윈리와 그를 뒷받침하는 국제조약, 통신관계법 및 제 학설에 순응할 수 있게 복귀되지 않으면 아니된다. 우리나라에는 기위 이 통신원리에 입각한 교육적계보(系讀)와 교육이념이 정립, 계승뙈 왔었고 또 그 이념에 바탕올 가진 교육목표를 지향하여 독자적이고 자율적인 교육체제밑에서 합리적이고 효과적인 교육실효을 거두어 왔다. 다만, 1961年 당시 한번의 그릇된 정책결정이 통신교육의 유일한 정통적(正統的) 표본이었던 체신학교를 즉흥적으로 폐쇄케 해버렸고 또 이 교육에 대한 국가적관리를 분산 약화했기 때푼에 오늘날 통신교육은 실향탈적(失鄭脫籍)펀 이산난민과 같이 되어 가고만 있는 것이다. 그러나 현재 통신학(通信學)원라는 현대과학적 강도를 심화, 고도화해 가고 있ξ며 이것올 방증(傍證)해주는 각종 국제협약과 법령이 유효하게 현행되고 있을뿐 아니라 그 교육내용의 다원척 본질이 불변일관(不變一實) 되고 있다. 그러므로 통신교육을 위한 교육관계법이나 교육행정은 그 종합적 원리에 적응할 수 있게 보완 개정되어야 함이 요청된다. 그리하여 통신교육을 위한 전문적 계열과 체계적 등급이 정착화되어 하나의 독사적이고 통합적인 교통(敎洗)과 자율적 교역(敎域)이 복원(復元) 쟁취 되어야 함이 절실한 실정이다. 통신교육은 통신과학적 원리를 저초(底魔)로한 독립적 계열화와 합리적 계층화를 통하여 그 독특한 교육 체제를 점거(占據) 함으로서 다른 동위(同位) 계열과 대응하게 공존공영할 수 있으며 내재적 각 운과릎 유기적으로 포괄, 집약, 유효화할 수 있는 것이다. 통신교육의 횡적계열은 독립되어 다른 계열에 속함이 없이 동위적이어야 하며 내재적 구분은 통신관리, 설비기술 및 통신연구로 3분화되고 그 종적 계총은 고교, 전운대, 대학 및 대학원의 학적 位階에 준하되 필요에 따라서는 보다 수직적인 세분이 가능하다. 이러한 종횡적 체계화와 그 독자적 체제의 확립은 문교법령과 국가적 차원의 교육행정을 보완 개선함에서 그 시점을 삼어야 한다고 볼 수 있는 것이다. 결국 통신교육을 위한 교육적 체제는 전기통신의 제원리(諸原理)와 이것을 방증(傍證)하는 제법리 및 이용 사회의 다변적 요청에 따라 관계 각 분과가 하나로 집약된 독자적 계열을 형성하여야 하며 충분한 운용상 자율성을 부여 받아야 한다. 전기통신이 고유의 교육계보를 되찾고 그 전문적 敎統과 자율적 교역이 확립, 형성될 수 있다면 그 원리가 교육현장에로 확대되어갈 것 이기 때문에 그 동안 본의 아니게 파생된 수다한 다의적 역리(逆理)와 탈선된 부조리가 통신영역에서 제거될 수 있어 밝은 그 본질(本質)이 회생(回生)될 수 있을 것으로 기대한다.

• Tuberculosis and Respiratory Diseases
• /
• 제48권5호
• /
• pp.766-772
• /
• 2000

배경 : 압력조절환기법(pressure control ventilation mode, PCV)에서 설정된 기도압의 달성은 기도저항이 일정한 조건에서 초기 흡기 유량 (inspiratory flow)에 의해 결정되며 압력상승시간(pressure rise time) 조절은 이 흡기 유량을 변동시킨다. 압력조절환기법에서 흡기 일환기량은 흡기 시간과 흡기 시간내 평균 흡기 유량에 따라 결정되므로 압력 도달 시간을 짧게 하면 초기 유량이 많아지게 되고 따라서 흡기되는 용적이 증가할 것으로 예상된다. 본 연구는 압력조절환기 법에서 압력상승시간을 줄이는 것이 흡기 일환기량 및 가스교환을 호전시키는지 알아보고자 하였다. 방법 : 호흡부전으로 기계호흡 중인 환자 13명(58$\pm$16세, 남 : 여=7 : 6)에서 Servo 300 (Simens-Elema, Solna, Sweden) 상의 압력상승시간 10%. 5% 및 30분 간 씩 적용하고 동맥혈 검사, 혈역동학적 지표(혈압, 분당맥박수) 및 호흡 지표(일회 호흡량, 최대 흡기유량, 최대 흡기압, 평균 기도압, 기도저항, 탄성도, 호기말 이산화탄소, 동맥혈가스)를 측정하였다. 결과 : 1) 압력상승시간이 10%, 5%, 0%로 변경시 일회 호흡량은 425$\pm$94 ml, 439$\pm$101 ml, 456$\pm$106ml로 증가되었다(p<0.001). 압력상승시간 단축에 따라 평균기도압 역시 증가되었다(각각 11.2$\pm$3.7cm $H_2O$, 12.0$\pm$3.7 cm $H_2O$, 12.5$\pm$3.8 cm $H_2O$; p<0.001). 2) pH는 10% 와 5% 보다 0%에서 높았으며(각각 7.40$\pm$0.08, 7.40$\pm$0.92, 7.41$\pm$0.96 ; p<0.0), $PaCO_2$도 10%와 5%에서 보다 0%에서 낮았다(각각 47.4$\pm$15.8 mm Hg, 47.2$\pm$15.7 mm Hg, 44.6$\pm$16.2 mm Hg ; p<0.01). 결론 : 압력조절환기법에서 압력상승시간의 단축은 일환기량과 평균기도압을 증가시키고, 동맥혈이산화탄소분압 저하 및 이에 따른 pH 상승 효과가 있었다. 압력조절 환기법에서 압력상승시간은 일환기량을 조절할 수 있는 한 변수로 사료된다.

• 대한핵의학회지
• /
• 제37권2호
• /
• pp.110-119
• /
• 2003

목적: 분화갑상선암 환자에 대한 방사성옥소(I-131) 치료는 재발율과 사망률을 감소시키는 효과적인 치료법이지만, 치료용량을 증가시킴으로써 치료율을 향상시킬 수 있는지에 대해서는 아직 논란이 있다. 본 연구에서는 최대허용선량 치료법의 효용성을 검증하고자 하였다. 대상 및 방법: 임상적 병기가 제3, 4병기이고, 6개월 이후에 I-131 전신스캔(이하 IWBS)과 혈중 thyroglobulin (이하 Tg), anti-thyroglobulin antibody (이하 ATA), 초음파검사(이하 US) 및 F-18 FDG PET 등을 통해 치료여부를 확인할 수 있었던 58명(남:여=9:49, 평균연령 $50{\pm}11$세)의 유두상갑상선암 환자를 대상으로 하였다. 이중 11명은 제4병기, 47명은 제3병기였으며, 43명(남:여=4:39, 평균연령 $50{\pm}11$세)은 7.4 GBq 이하의 고식적인 저용량치료법으로 치료하였고, 9.25 GBq 이상의 고용량 치료를 받은 환자는 15명(남:여=5:10, 평균연령 $50{\pm}12$세)으로 고용량군에서 남자가 더 많았으나 연령의 차이는 없었다. 고용량군 환자 모두에서 추적용량의 방사성옥소(평균 $77{\pm}3MBq$)를 경구 투여한 후 혈중 방사능소실곡선을 통해 최대허용선량(maximum permissible dose, 이하 MPD)을 계산하였으며, 7명에서는 말초혈액림프구의 중기염색 체분석법에 의해 생물학적으로 MPD를 계산하였다. 14명에서는 치료용량의 방사성옥소를 투여한 후 혈중 방사능소실곡선을 통해 MPD를 계산하였다. 완전치유(complete response, 이하 CR)는 IWBS에서 병소가 없어지고, 혈중 Tg치가 1 ng/mL 이하로 감소한 경우로 정의하였으며, 부분치유(partial response, 이하 PR)는 IWBS에서 병소가 없어졌더라도 혈중 Tg, ATA치가 높거나, US 또는 PET 검사에서 병소가 남아있는 경우로 정의하였다. 치료후 IWBS에서 병소가 오히려 증가하거나 변함없는 경우는 없었다. 방사성옥소 치료에 의한 부작용은 입원기간 중 타액선이 현저하게 붓고 통증이 있거나, 구토를 심하게 하는 경우, 그리고 퇴원후 1개월째 백혈구수가 20% 이상 감소한 경우로 정의하였다. 결과: 양 군간에 연속적인 수치변화를 비교하는 경우는 paired t-test를 이용하였으며, 대상군간 치료효과와 부작용의 비교는 chi-square test를 이용하였다. p값 0.05 미만을 통계적으로 유의한 차이로 인정하였다. 고용량군 환자 모두에서 추적용량과 치료용량의 방사성옥소 투여 후 혈액의 피폭선량은 각각 $0.012{\pm}0.3Gy,\;1.66{\pm}25Gy$였으며, 방사성옥소 투여 후 혈액에 전달되는 피폭선량은 추적용량보다 치료용량에서 더 많았고(1.21: 166 rad, p<0.0001), 방사성옥소 1 mCi당 혈액에 전달되는 피폭선량은 차이가 없었다($0.58{\pm}0.1\;vs.\;0.56{\pm}0.1$ rad/37 MBq, p=0.34). 추적용량 방사성옥소 투여 후 구한 MPD는 평균 $13.3{\pm}1.9GBq\;(9.7{\sim}16GBq)$ 이였고, 치료용량 방사성옥소 투여 후 구한 MPD는 평균 $13.8{\pm}2.1GBq(10.4{\sim}16.3GBq)$로 유의한 차이가 얻었으며 (p=0.20), 두 수치간에는 유의한 상관 관계가 있었다(r=0.8, p<0.0001). 7명의 환자에서 말초혈액림프구 중기염색체 분석법으로 MPD를 측정하였는데 혈액의 피폭선량은 $1.78{\pm}0.03Gy$였으며, 같은 환자에서 혈중 방사능소실곡선으로부터 구한 피폭선량은 $1.54{\pm}0.03Gy$로 유의하게 낮았으나 (p=0.01), 두 측 정치 간에는 유의한 상관관계(r=0.86, p=0.01)가 있었다. 저용량 치료군 43명 중 22명(51.2%)에서 완전치유를 보였고 21명(48.8%)에서는 부분치유를 보인 반면, 고용량 치료군 15명 중 12명(80%)에서 완전치유를 보였고 3명(20%)에서만 부분치유를 보여 고용량 치료군에서 유의하게 높은 완전치유를 얻을 수 있었다(p=0.05). 한편 부작용 발생빈도는 저용량 치료군 43명 중 13명(30.2%), 고용량 치료군 15명중 6명(40%)로 양군간에 유의한 차이가 없었다(p=0.46). 임상적인 병기, 연령 및 성별에 따라서는 치유의 차이가 없었다(모두 p>0.05). 결론: 혈중소실곡선으로부터 MPD를 결정하고 이를 토대로 환자 개개인별로 적절한 선량을 선택하여 치료하는 방법은 부작용을 최소화하면서도 치료효과를 높일 수 있는 매우 유용한 치료법이며, 고위험군 분화갑상선 암 환자에게 가장 적절한 치료법이라고 사료되었다.

• 농업과학연구
• /
• 제9권1호
• /
• pp.284-302
• /
• 1982

식량(食糧)으로서 단백질자원(蛋白質資源)의 개발문제(開發問題)는 동남(東南)아시아에 있어서 특(特)히 중요(重要)하며 한국(韓國)에 있어서도 섭취량(攝取量)이 부족(不足)한 현상(現狀)이다. 이 문제(問題)를 개선(改善)하는 방법으로 특(特)히 영양가(營養價)가 높은 동물성(動物性) 단백질(蛋白質)의 증산(增産)을 목적(目的)으로 한국재래산양(韓國在來山羊)의 사육(飼育)에 관(關)해서 연구(硏究)를 행하였다. 이 실험(實驗)은 우선 한국고유(韓國固有)의 재래산양(在來山羊)을 육자원(肉資源)으로 개발(開發)할 가치(價値)가 있는가를 확인(確認)하기 위해서 소형(小型) 제(第)1위법(胃法)으로 탄수화물(炭水化物)과 휘발성지방산(揮發性脂肪酸)의 흡수(吸收)를 실험(實驗)하였고 한편 in vivo법(法)에 의해서 제(第)1위(胃)의 아미노산 흡수(吸收)에 관해서 실험(實驗)을 했다. 이와 같은 실험(實驗) 결과(結果)에서 한국재래산양(韓國在來山羊)의 사육(飼育) 개선(改善)에 관해서 요약(要約)하면 다음과 같다. 1. 소형(小型) 제(第)1위법(胃法)에 의해서 재래산양(在來山羊)의 영양흡수(營養吸收)에 관하여 실험(實驗)한 결과(結果)는 영양소(營養素)를 주입(注入) 한 후 0.5, 1, 2시간(時間)의 간격(間隔)으로 측정(測定)한 V F A의 흡수율(吸收率)이 푸로피온산 70~86%, 초산 74~87%, 낙산 76~89%였다. 유기물(有機物)의 흡수율(吸收率)은 0.5%의 에칠 알콜이 29~89%였으며, 0.1M의 젖산이 12~27% 흡수(吸收)되었다. 2. 제(第)1위내(胃內)에 유리(遊離) L형(型) 아미노산을 투여(投與)하고 그 흡수(吸收)를 측정(測定)한 결과(結果)는 제(第)1위(胃) 정맥(靜脈)의 아미노산 함량(含量)에 있어서 전요(全要)아미노산구(區)에 비하여 메치오닌 결핍구(缺乏區)의 흡수율(吸收率)이 적었고 메치오닌 3배구(倍區)와 요소첨가구(尿素添加區)의 아미노산 흡수율(吸收率)이 높고 특(特)히 메치오닌을 결핍(缺乏)시켜도 점막층(粘膜層)의 함량(含量)에는 변화(變化)가 없었다. 3. 제(第)1위내(胃內)에 근육층(筋肉層)의 아미노산 흡수(吸收)도 점막(粘膜)과 같은 경향(傾向)을 보였으며 메치오닌 결핍(缺乏)에 의한 영향은 없고, 메치오닌을 3배(倍)로 첨가(添加)하면 전요(全要)아미노산구(區)에 비(比)하여 메치오닌과 글루타민의 함량이 147.44배(倍) 이상으로 증가(增加)되며 또 요소첨가구(尿素添加區)는 글루타민, 프롤린, 발린의 흡수율(吸收率)이 증가(增加)되었다. 4. 제(第)1위(胃) 정맥혈장(靜脈血漿) 중의 아미노산 농도(濃度)는 제(第)1위(胃) 점막(粘膜) 중이나 근육(筋肉) 중에서 보다 일반적(一般的)으로 낮으며 메치오닌의 결핍(缺乏)에 의해서 아미노산의 흡수율(吸收率)이 저하(低下)되고 메치오닌 3배구(倍區)나 요소첨가구(尿素添加區)는 아미노산 흡수(吸收)를 증가(增加)시키는 등 아미노산 조성분(組成分)에 따라서 그 흡수상태(吸收狀態)에 변화가 생긴다. 5. 요소첨가구(尿素添加區)는 제(第)1위(胃) 근육층(筋肉層)의 암모니아태질소(態窒素)와 아미노태질소(態窒素) 및 요소(尿素)의 함량(含量)을 증가(增加)시켰다. 재래산양(在來山羊) 제(第)1위(胃)안을 완전(完全)하게 깨끗이 할 수 없으므로 남아있는 세균(細菌)을 조사(調査)하였으며 암모니아태질소(態窒素)의 변화(變化)는 이러한 조건(條件)의 영향을 받았다. 6. 아미노산의 흡수차(吸收差)에 의한 제(第)1위(胃) 조직(組織)의 변화(變化)를 일반(一般) 현미경(顯微鏡)과 형광(螢光) 현미경(顯微鏡)으로 관찰(觀察)한 결과(結果)는 메치오닌 3배구(倍區)에 있어서 점막(粘膜)의 단층엔주상피(單層円柱上皮)와 고유층(固有層)이 약간 엷어졌으며 요소첨가구(尿素添加區)는 두껍게 변화(變化)하였는데 점막하조직(粘膜下組織)이나 근층(筋層)에 있어서는 각(各) 구간(區間)에 큰 차이(差異)가 인정(認定)되지 않았다.

• 한국임상수의학회지
• /
• 제22권4호
• /
• pp.328-335
• /
• 2005

개의 양측성 고관절 이형성을 치료하기 위해 실시하는 슬로컴의 편측 3중 골반 절골술을 개선하기 위해 고안된 변형 3중 골반 절골술의 효과에 대해 알아보고자 본 연구를 실시하였다. 변형 3중 골반 절골술은 양측 장골 절골술과 치골결합 절골술을 동시에 실시하는 방법이다. 변형 3중 골반 절골술을 실시한 36마리와 편측 3중 골반 절골술을 실시한 7마리의 개에 대한 품고, 체중, 수술 시간, 골 유합기간, 복합증 등의 자료를 조사, 기록하였다 임상 증상과 고관절 이형성의 등급, Norberg angle, percentage of femoral head coverage, 골반 직경에 대해 수술 전, 직후, 수술 후 2, 4, 8, 12, 24주에 각각 측정, 기록하였다. 편측 3중 골반 절골술을 실시한 개체의 평균 연령과 체중은 각각 $9.0\pm4.9$개월, $24.8\pm7.5kg$ (n=7)이었다. 수술 후 평균 $3.0\pm1.0$일에 스스로 일어서고 $8.3\pm0.6$일부터는 걸을 수 있었다(n=3). 수술 전과 24주 후의 평균 임상 증상 등급은 각각 $2.2\pm0.42$ (n=6), $3.5\pm0.7$ (n=2)이었다. 평균 수술 시간은 $107.3\pm38.9$분 (n=4)이었다. 변형 3중 골반 절골술을 실시한 개체의 평균 연령과 체중은 각각 $8.7\pm3.0$개월, $26.9\pm7.6kg$ (n=36)이었다. 이중 25마리는 수술 후 평균 $4.9\pm3.7$일부터 스스로 일어날 수 있었고 평균 $7.3\pm4.8$일 후부터 보행이 가능하였다 변형 3중 골반 절골술을 실시한 개체의 수술 전과 24주 후의 평균 임상 증상 등급은 각각 $2.3\pm1.5$ (n=27), $3.2\pm0.7$ (n=9)로 수술 전보다 유의적으로 개선되었다.(P<0.01). 평균 수술 시간은 $143\pm42.8$분(n=24)으로 두 번의 편측 3중 골반 절골술보다 단축되었다 변형 3중 골반 절골술을 실시한 개체의 수술 전 방사선학적 평균 고관절 등급은 양측 모두 $3.2\pm0.9$이었고 수술 직후의 좌 우측 평균 고관절 등급은 각각 $2.7\pml.1,\;2.7\pm0.9$ (n=36) 이었다. 수술 직후와 2, 4, 8, 12, 24주 후의 고관절 등급이 수술 전에 비하여 유의적으로 개선된 것을 확인하였다.(P<0.01). 수술 후 정기적인 검사 시에 측정한 Norberg angle, percentage of femoral head coverage도 수술 전과 비교해 유의성 있게 증가하였다(P<0.01). 변형 3중 골반 절골술 직후의 평균 골반직경은 수술 전의 골반직경보다 유의적으로 증가하였으며(P<0.01)(n=36) 수술 후 평균 9.3L2.7주에 절골선 유합이 종료되었다(n=21). 반면 편측 3중 골반 절골술을 실시한 경우에는 수술 후 골반경이 수술 전과 비교해 증가하지 않았다. 변형 3중 골반 절골술후에 장액종 형성(1마리), 스크류 변위(4마리), 스크류 부러짐(1마리), 편측성 신경마비(1마리) 등의 부작용이 발생하였다. 이상의 결과를 토대로, 변형 3중 골반 절골술은 개의 고관절 이형성의 효과적인 치료 방법이라 사료된다.