• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.123-126
• /
• 2005

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of low cost lens design and simulation for microdisplay system with 0.6"LCoS panel. Lens design optimized consider to spherical aberration, astigmatism, distortion, and chromatic aberration. Code V is used and it designed an aspheric lens about exit pupil 6mm, eye relief 20mm and 35 degree of field of view (FOV). With the application this aspheric lens to liquid crystal on silicon (LCOS) type's microdisplay, virtual image showed 50 inch at 2m. One side of the aspheric lens was constituted from diffractive optical element (DOE) for the improvement in a performance. It had less than 2.5% of distortion value and modulation transfer function in axial had 20% of resolution with 32 lp/mm spatial frequency. The optical system is suitable for display of 15.6 mm-diagonal with SVGA.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.34-35
• /
• 2005

Eye Glass Display(EGD)에 사용되는 광학계를 비구면과 Diffractive Optical Element(DOC)를 이용한 플라스틱 렌즈로 구성하여 소형, 경량으로 제작이 가능하게 설계하였다. 비구면과 DOE를 최적화한 1매의 렌즈로 광학계를 구성하여 display의 길이를 줄이고, 왜곡과 색수차를 보정하며 해상력을 향상 시켰다. 더불어, 광학계는 안경 착용자가 불편하지 않을 정도의 eye relief와 눈의 움직임에 여유를 가질 수 있는 크기의 eye motion box(exit pupil)를 가진다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.68-69
• /
• 2006

Eye Glass Display(EGD)의 광학계를 소형, 경량화 하기 위하여 OLED 마이크로 패널과 프리즘 렌즈를 사용하여 설계하였다. 광학계 설계에 사용된 OLED 마이크로 패널은 0.59"크기의 SVGA($800{\times}600$)급이며, 크기는 0.59"이며, 렌즈는 프리즘 렌즈로 설계되었다. 설계된 프리즘 렌즈는 3연으로 구성되었으며, 각 면은 각각 비회전대칭 비구면으로 tilt와 decenter를 사용하여 광학적 성능을 향상시켰다. 설계된 프리즘 렌즈의 화각(FOV)은 $28^{\circ}$, 왜곡수차는 4% 이내이며, 광학계의 해상도를 나타내는 MTF는 공간주파수 30lp/mm에서 full field가 40%이상의 성능을 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1603-1606
• /
• 2005

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of low cost lens design and simulation for microdisplay system with 0.6" Liquid Crystal on Silicon (LCoS) panel. Lens design optimized consider to spherical aberration, astigmatism, distortion, and chromatic aberration. Code V is used and it designed an aspheric lens about exit pupil 6mm, eye relief 20mm and 35 degree of field of view (FOV). With the application this aspheric lens to LCOS type's microdisplay, virtual image showed 50 inch at 2m. One side of the aspheric lens was constituted from diffractive optical element (DOE) for the improvement in a performance. It had less than ${\pm}2%$ of distortion value and modulation transfer function in axial had 20% of resolution with 30 lp/mm spatial frequency. The optical system is suitable for display of 0.6"-diagonal with SVGA.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.331-332
• /
• 2007

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.454-454
• /
• 2007

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of spherical prism lens design and manufacture of a small size and light weigh EGD with 0.59" OLED panel. Code V is used and it designed an aspherical prism lens about eye relief 25mm and 42 degree of filed of view (FOV). With the application this aspheric prism lens to OLED type's microdisplay, virtual image showed 60 inch at 2m. It had less than 2% of distortion value and modulation transfer function in axial had 30% of resolution with 32 lp/mm spatial frequency. We made an injection molding bases to lens designed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.177-182
• /
• 1999

With the recent evolutionary progress in network and terminal technologies, current videoconference systems are in the level of practical use. The existing systems, however, would not be fully useful for decision making process since eyes of users can not always be in contact that makes it difficult to read the expression of participants. In this paper, we discuss the principle and the impact of“MONJUnoCHIE System”a videoconference system with eye contact using a special display device called“Glass Vision”.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.3
• /
• pp.18-23
• /
• 2006

The formation degree of sustain (ITO pattern) determines the quality of a PDP (Plasma Display Panel). Thus, in the present study, we attempt to detect 100% of the defects that are larger than $30{\mu}m$. Currently, the inspection method in the PDP manufacturing process is dependent upon the naked eye or a microscope in off-line mode. In this study, a prototype inspection system for PDP ITO patterned glass is developed. The developed system, which is based on a line-scan mechanism, obtains information on the defects and sorts the defects by type automatically. The developed inspection system adopts a multi-vision method using slit-beam formation for minimum inspection time and the detection algorithm is embodied in the detection ability. Characteristic defects such as pin holes, substances, and protrusions are extracted using the blob analysis method. Defects such as open, short, spots and others are distinguished by the line type inspection algorithm. It was experimentally verified that the developed inspection system can detect defects with reliability of up to 95% in about 60 seconds for the 42-inch PDP panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.468-471
• /
• 2003

We firstly report liquid crystal shutter based on plastic film and its application to 3D shutter for stereoscopic displays. Plastic liquid crystal shutters have remarkable advantages compared to conventional glass liquid crystal shutters. They are thin, light and non-breakable so that very comfortable 3D shutter eye-wear can be realized using them. The concepts, optical performances and reliability test results of plastic film liquid crystal shutters are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.92-99
• /
• 2004

The formation degree of sustain (ITO pattern) decides quality of PDP (Plasma Display Panel). For this reason, it makes efforts in searching defects more than 30 un as 100%. Now, the existing inspection is dependent upon naked eye or microscope in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP 170 glass is based on line-scan mechanism. Developed system creates information that detects and sorts kinds of defect automatically. Designed inspection technology adopts multi-vision method by slip-beam formation for the minimum of inspection time and detection algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix that draws up an approach to geometry. A characteristic of defects, as pin hole, substance, protrusion, are extracted from blob analysis method. Defects, as open, short, spots and et al, are distinguished by line type inspection algorithm. In experiment, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds.