• 소성∙가공
• /
• 제24권5호
• /
• pp.317-322
• /
• 2015

A process for the concurrent welding and extruding of pipe was designed for continuous production of fin tubes. Unlike a conventional pipe extrusion, the new process is able to extrude a pipe continuously without limit of length by using spring type wire material. The current paper provides the basic research for welding during the extrusion using a spring type wire material. The object of the current study is to investigate the possibility that the spring type wire material could be extrude into a welded pipe. The appropriate extrusion ratio was selected through investigation of loads using computer simulations. As a result, experiments showed that pipe could be welded and simultaneously extruded with spring type wire material of aluminum. The tensile strength of the welded and extruded aluminum pipe can reach 80% of tensile strength of original aluminum feedstock.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.174-181
• /
• 2001

An upper bound elemental technique(UBET) has been carried out to predict the forming load, the deformation pattern and the extrude length of the lateral extrusion of a spider for the automotive universal joint. For the upper bound analysis, a kinematically admissible velocity field(KAVF) is proposed. From the proposed velocity field, the upper bound load, the deformation pattern and the average length of the extruded billets are determined by minimizing the total energy consumption rate which is a function of unknown velocities at each element. Experiments are carried out with antimony-lead billets at room temperature using the rectangular shape punch. The theoretical prediction of the forming load, the deformation pattern and the extruded length are good in agreement with the experimental results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 제5회 압출 및 인발가공 심포지엄
• /
• pp.23-32
• /
• 2002

The torsional forward extrusion is the process that is executed by punch travel and die rotation. The advantages of having the die rotation on this process are that forming load can be reduced and optimal die angle can be increased. This provides a possibility to extrude cold-worded material where a large extrusion force and die angle are required. Also, this process can improve the material properties owing to the high deformation and uniform strain distribution. The forming load and optimal die angle of this process are determined by the upper bound analysis using stream function and the optimization technique. To verify the theoretical result, we have carried out experiments and FE simulations using DEFORM3D.

• 소성∙가공
• /
• 제9권3호
• /
• pp.219-225
• /
• 2000

Equal channel angular pressing (ECAP) is a convenient forming process to extrude material without substantial changes in the sample geometry and this deformation process gives rise to produce ultrafine grained materials. The properties of the materials are strongly dependent on the plastic deformation behaviour during ECAP. The major process variables during ECAP are 1) die geometries, such as a channel angle and coner angles, and 2) the processes variables, such as lubrication and deformation speed. In this study, the plastic deformation behaviour of materials during the ECAP has been theoretically analysed by the finite element method (FEM). The effect of the die friction on the plastic deformation behaviour during the pressing is discussed by means of FEM calculations.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.521-528
• /
• 2021

진공 압출성형 방법에 의하여 생산되는 섬유 시멘트 복합체는 연속 생산이 가능하고 고밀도 무기질 재료의 구성이 가능한 제품이다. 보강섬유로 사용하고 있는 폴리프로필렌과 펄프의 연소에 따른 가스의 발생과 이로 인하여 불연성능 시험 중 중심부에 지속적으로 불꽃이 발생하여 성능을 충족하지 못하는 경우가 발생한다. 본 연구에서는 불연 특성 개선을 위하여 내알칼리 성능을 개선한 ARG(Alkali resistant glass)섬유를 보강섬유로 사용하여 시험체를 제조하고 성능 평가를 실시하였다. 섬유량은 부피비를 기준으로 하여 적용하였다. 측정결과 폴리프로필렌을 전량 유리섬유로 대체하고 펄프 사용량을 50% 감소하여 배합할 경우 불꽃은 발생하지 않거나 5초 이내 소화 되는 것을 확인하였다. 패널의 압출성과 생산성, 그리고 경화 후 적정한 인성 및 취성재료의 개선을 위하여 펄프 사용량은 기존 사용량의 50%를 유지하는 것이 바람직하며, 불연성능의 개선을 위하여 별도의 결합재 변경은 필요하지 않은 것으로 확인되었다.