• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.29-37
• /
• 1999

Ventilation of the marine engine room is very important for the health of the workers as well as the normal operation of machines. To find proper ventilation conditions of this engine room, numerical simulation with standard k-${\epsilon}$ model was carried out. In the present study, the marine engine room is separated to two floors with porus horizontal partition and considered as a closed space with a heat source and forced ventilation ducts. The porosity of horizontal partition is found to be important. For the engine room with 2 supply ports & 2 exhaust ports, the increasing of the porosity of horizontal partition is effective to reduce the recirculation flow zone in the second floor. When the engine room is ventilated with three supply air ports & one exhaust port, the increasing of the porosity of horizontal partition is effective to reduce the recirculating flow zone in the exhaust air area, but there is a possibility of local extreme heating at the lower side of engine near bottom.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.6
• /
• pp.284-291
• /
• 2016

High temperature alloy steel such as Ni-Cr-Mo-V material has excellent properties of high strength and high heating resistance. It has been used for several military weapon components such as gun barrel of a warship, turbine rotor and turbine disk for nuclear power plant. Being curious about this material required excellent wear resistance and durability in extreme environmental conditions. A dry wear test at the ambient air and Ar gas conditions in the room temperature were performed in this study. What's more a lubricant wear test at different temperature was conducted. In addition that DLC was coated on Ni-Cr-Mo-V alloy steel substrate with a thickness of $3{\mu}m$, a property of it was compare with lubricant conditions. All the coefficient of friction and wear volume, comparing with DLC coated specimens. The test parameters were selected as follows: 10 N for normal load; 80 rpm for sliding wear speed; and 300 m for the sliding wear distance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.478-485
• /
• 2008

The extreme steam temperature deviation experienced in the superheater of a tangentially fired boiler can seriously affect its economic and safe operation. This temperature deviation is one of the main causes of boiler tube failures. The steam temperature deviation is mainly due to the thermal load deviation in the lateral direction of the superheater. The thermal load deviation consists of several causes. One of the causes is the non-uniform heat flow distribution of burnt gas on the superheater tube system. This distribution is very difficult to measure in situ using direct experimental techniques. So, we need thermal load model to estimate the tube temperature. In this paper, we propose a thermal load distribution model by using CFD analysis and plant data. We successfully predict the tube temperature and the steam flow rate in a final superheater system from the thermal load model and one dimensional heat-flow system analysis. The proposed model and analysis method would be valuable in preventing the frequent tube failure of the final superheater tubes.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.676-682
• /
• 2019

After the Fukushima Daiichi accident, there has been an increasing preference for passive safety features in the nuclear power industry. Some passive safety systems require limited active components to trigger subsequent passive operation. Under very serious accident conditions, passive safety features could be rendered inoperable or damaged. This study evaluates (i) the performance and effectiveness of the passive safety features of iPOWER (innovative Power Reactor), and (ii) whether a severe accident condition could be reached if the passive safety systems are damaged, namely the case of heat exchanger tube rupture. Analysis results show that the reactor coolant system remains in the hot shutdown condition without operator actions or electricity for over 72 h when the passive auxiliary feedwater systems (PAFSs) are operable without damage. However, heat exchanger tube rupture in the PAFS leads to core damage after about 18 h. Such results demonstrate that, to enhance the safety of iPOWER, maintaining the integrity of the PAFS is critical, and therefore additional protections for PAFS are necessary. To improve the reliability of iPOWER, additional battery sets are necessary for the passive safety systems using limited active components for accident mitigation under such extreme circumstances.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.355-355
• /
• 2021

극한 폭염사상은 지난 20세기 이후 점점 더 빈번하게 발생하고 있으며, 더 광범위한 지역에서 발생하고 있다. 이러한 폭염사상은 다가오는 지구 온난화 시대에서 그 강도가 더 강해지고 지속기간이 길어질 것으로 예상되고 있다. 본 연구에서는 극한강우에 대한 강우강도-지속기간-빈도(intensity-duration-frequency, IDF)곡선의 개념을 폭염사상에 적용하여 미래의 극심한 폭염사상에 대한 발생확률, 강도 및 지속날짜(heat wave intensity-persistence day-frequency, HPF) 간의 관계를 확인해보고자 한다. 또한 해당 모델의 불확실성은 베이지안 기법을 이용하여 분석하였다. 우리나라 6개 주요 지역(대관령, 서울, 대전, 대구, 광주, 부산)에 대해 16개의 미래 일 최대 기온 앙상블 자료를 이용하여 비정상성 HPF곡선을 적용하였다. 미래 극한 폭염 앙상블 결과를 분석한 결과, 2050년을 기준으로 지속기간 2일에 대해 극한 폭염의 강도가 RCP 4.5 이하 시나리오 기준 1.23 ~ 1.69 ℃ 범위에서 상승할 가능성이 높은 것으로 나타났으며, RCP 8.5 이하 시나리오 기준의 경우 1.15 ~ 1.96 ℃ 범위로 나타났다. 또한 HPF 모델의 매개변수 추정으로 인한 불확실성의 경우, 다양한 기후 모델의 변동성으로 인한 불확실성보다 크게 나타났다. 모델의 매개변수 추정에 따른 불확실성을 반영한 결과, 2010~2050년에 해당하는 폭염의 강도에 대한 delta change의 95% 신뢰구간은 RCP 4.5 이하에서 0.53 ~ 4.94 ℃, RCP 8.5 이하에서 0.89 ~ 5.57 ℃로 나타났다.

• Journal of Korean Medical classics
• /
• v.3
• /
• pp.151-217
• /
• 1989

In this thesis, I intend to study the translational and clinical interpretation through the theory of Ja-Yeol, and reached the following conclusions. 1. Liver-Heat-Disease due to absess of the function of expelling and lifting off, that Liver-Yang cannot lift up to upper-warmer, and stagnate liver. I think the symptoms of yellowish urine, abdominal pain, somnolence, fever belong to the syndrome of 'Gi-Bun(氣分)', and the symptoms of ravings with surprising, distending pain of hypochondrium, restless involuntary movement of the limbs, unable to lie flat belong to the syndrome of 'Hyeol-Bun(血分)'. 2. Heart-Heat-Disease due that 'Eum-Gi(陰氣)' in heart cannot lay down and reach to stagnate at heart, inner part. I think the symptoms of unjoy, acute cardiac pain, fidgetiness, well-nausea, headeche, reddish face, anhidrosis, etc. reveal with Heart-Heat-Disease. 3. Spleen-Beat-Disease due that 'Eum-Gi' in spleen cannot lay down and Yin of spleen changs heat. I think the symptoms of heaviness of head, cheek pain, fidgetiness, cyanosis, well-nausea, fever, not to let flex and reflex with back pain, diarrhea with abdominal pain, left and right cheek pain reveal with Spleen-Heat-Disease. I think symptoms of fever, diarrhea with abdominal pain belong to the syndrome of Yin-exhausion. 4. Lung-Heat-Disease due to that 'Eum-Gi' in lung cannot lay down. When 'Wi-Gi(衛氣)' stagnates at external part, I think, the symptoms of intolerance to wind and cold, yellowish fur, fever reveal. When Wi-Gi stagnates at lung, inner part, I think, the symptoms of dispnea with cough, pain on chest and back, unable to breath deeply, hydrosis and chilling reveal. 5. Kidney-Heat-Disease, in that the symptoms of back pain, leg aching, extreme thirst and frequently drink, fever, pain and stiffness of nape, cooling and aching leg, heat on plantar pedis, not trying to speak reveal is regarded external heat disease of 'Tai-Yang-Gyeong's(太陽經)' disease that asthenic fever open 'Tai-Yang-Gyeong' and lift by not enough of 'Yang-Gi(陽氣)' lifeing up from Kidney space, the water space of five elements.

• Journal of Preventive Medicine and Public Health
• /
• v.46 no.1
• /
• pp.19-27
• /
• 2013

Objectives: This study was conducted to investigate the relationship between heat-related illnesses developed in the summer of 2012 and temperature. Methods: The study analyzed data generated by a heat wave surveillance system operated by the Korea Centers for Disease Control and Prevention during the summer of 2012. The daily maximum temperature, average temperature, and maximum heat index were compared to identify the most suitable index for this study. A piecewise linear model was used to identify the threshold temperature and the relative risk (RR) above the threshold temperature according to patient characteristics and region. Results: The total number of patients during the 3 months was 975. Of the three temperature indicators, the daily maximum temperature showed the best goodness of fit with the model. The RR of the total patient incidence was 1.691 (1.641 to 1.743) per $1^{\circ}C$ after $31.2^{\circ}C$. The RR above the threshold temperature of women (1.822, 1.716 to 1.934) was greater than that of men (1.643, 1.587 to 1.701). The threshold temperature was the lowest in the age group of 20 to 64 ($30.4^{\circ}C$), and the RR was the highest in the ${\geq}65$ age group (1.863, 1.755 to 1.978). The threshold temperature of the provinces ($30.5^{\circ}C$) was lower than that of the metropolitan cities ($32.2^{\circ}C$). Metropolitan cities at higher latitudes had a greater RR than other cities at lower latitudes. Conclusions: The influences of temperature on heat-related illnesses vary according to gender, age, and region. A surveillance system and public health program should reflect these factors in their implementation.

• Journal of Consumption Culture
• /
• v.15 no.2
• /
• pp.213-247
• /
• 2012

The purpose of this study was to analyze the economic structures of low-income households, and to provide the policy suggestions for their economic well-being. The data for this study was from the 2009 year of the Korea Welfare Panel Survey (KOWEPS). The results are as follows: As for income structure, the low-income households had lower amounts in earned income, business and side-work income, and property income, but a higher amount in transfer income. They had a lower amount in private transfer income, but a higher amount in public transfer income. They had the highest rate of transfer income, showing that the rate of public transfer income was higher than that of private transfer income, and the government assistance was the highest rate in public transfer income. The households in extreme poverty had the lowest amounts in earned income, financial income, private transfer income, but the highest amount in public transfer income. The households in poverty had the lowest amount in transfer income. The households in extreme poverty, poverty and near poverty showed the highest rate in transfer income. As for asset structure, the low-income households had a lower amount in every type of assets. They showed the highest rate in total debt, and had a higher rate in housing asset, but lower rates in real-estate asset, financial asset and other asset. The households in extreme poverty had a lower amount in every type of assets than the households in near poverty. Three types of the low-income households showed the highest rate in housing asset, but the households in extreme poverty was the highest among them. As for expenditure structure, the low-income households had lower amounts in all of the expenditure items. They showed the highest rate in food expenditure, the second highest in other consumption expenditure. The households in extreme poverty showed lower amounts in almost all of the expenditure items than the households in near poverty, but the households in extreme poverty showed a higher amount in monthly rent than the households in neat poverty. Three types of the low-income households showed the highest rate in food expenditure. The expenditure rates of food, monthly rent and light·heat·water for households in extreme poverty were higher than those for the households in near poverty.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.295-304
• /
• 2020

The IPCC (Intergovernmental Panel on Climate Change) recommended the importance of preventive measures against extreme weather, and heat waves are one of the main themes for establishing preventive measures. In this study, we tried to analyze the heat vulnerable areas by considering not only spatial characteristics but also social characteristics. Energy consumption, popu lation density, normalized difference vegetation index, waterfront distance, solar radiation, and road distribution were examined as variables. Then, by selecting a suitable model, SLM (Spatial Lag Model), available variables were extracted. Then, based on the Fuzzy theory, the degree of vulnerability to heat waves was analyzed for each variable, and six variables were superimposed to finally derive the heat vulnerable area. The study site was selected as the Daegu area where the effects of the heat wave were high. In the case of vulnerable areas, it was confirmed that the existing urban areas are mainly distributed in Seogu, Namgu, and Dalseogu of Daegu, which are less affected by waterside and vegetation. It was confirmed that both spatial and social characteristics should be considered in policy support for reducing heat waves in Daegu.

• Journal of Environmental Impact Assessment
• /
• v.33 no.1
• /
• pp.9-17
• /
• 2024

The purpose of this study is to select and predict optimal heatwave indices for describing and predicting heat-related illnesses. Regression analysis was conducted using Heat-related illness surveillance system data for a number of heat-related illnesses and meteorological data from the Korea Meteorological Administration's Automatic Weather Station (AWS) for the period from 2021 to 2023. Daily average temperature, daily maximum temperature, daily average Wet Bulb Globe Temperature (WBGT), and daily maximum WBGT values were calculated and analyzed. The results indicated that among the four indicators, the daily maximum WBGT showed the highest suitability with an R² value of 0.81 and RMSE of 0.98, with a threshold of 29.94 Celsius. During the entire analysis period, there were a total of 91 days exceeding this threshold, resulting in 339 cases of heat-related illnesses. Predictions of heat-related illness cases from 2021 to 2023 using the regression equation for daily maximum WBGT showed an accuracy with less than 10 cases of error annually, demonstrating a high level of precision. Through continuous research and refinement of data and analysis methods, it is anticipated that this approach could contribute to predicting and mitigating the impact of heatwaves.