• Biomedical Science Letters
• /
• v.28 no.1
• /
• pp.34-41
• /
• 2022

In this study, conditions for extraction of functional component from Nypa fruticans wurmb was optimized. The yield by extraction with 30% ethanol (LE30, 42.12%) was higher than those hot water extraction (LDW 33.32%), 50% ethanol (LE50, 40.12%) and 70% ethanol (LE70, 34.5%). The extract was purified and analyzed by GC MS. The prevailing compounds found in extract were Cyclodecasiloxane-, pentadecanoic acid, -eicosane, undecanal and tridecanoic acid. The presence of saturated and unsaturated fatty acids in ethanolic extract vindicate the use of this plant to treat many diseases in traditional medicine. The total phenolic contents in the LDW, LE30, LE50, LE70 extract were 128±1.65 mg/g, 205±2.3 mg/g, 210±4.23 mg/g and 180±5.6 mg/g, respectively. The DPPH was highest in LE70 extract (1,000 ㎍/mL, 81.14%), ABTS was highest in LE50 extract (1,000 ㎍/mL, 84.14%). The protective effects against oxidative stress in raw 264.7 cell imparted by the LE50 extract was better than those imparted by the other extracts. The findings of the present study suggest that 50% ethanol is best solvent for extraction of Nypa fruticans Wurmb, considering yield, polyphenol content, and antioxidant activities with extraction cost.

• Korean Journal of Ecology and Environment
• /
• v.41 no.4
• /
• pp.485-489
• /
• 2008

Algal chlorophyll-$\alpha$ is commonly determined by spectro-photometric method using 90% acetone as solvents. However, acetone has low extraction efficiency without grinding filters, and DMF (dimethyl formamide) was tested for the compatibility with acetone. Chlorophyll-$\alpha$ concentration was determined for samples from 5 reservoirs of different trophic states and phytoplankton composition, using acetone extraction with grinding and DMF without grinding. Chlorophyll-$\alpha$ measured by DMF and Acetone did not show a significant difference when using trichromatic method of UNESCO and Lorenzen, and therefore, DMF can substitute acetone. But when acidification method was applied, they showed significant difference of 8%. It can be concluded that DMF can extract chlorophylls more effectively without grinding and it can be a better alternative for the standard extraction solvent.

• YAKHAK HOEJI
• /
• v.36 no.6
• /
• pp.563-569
• /
• 1992

The sorption and desorption properties of four different solid adsorbents were evaluated for the trace enrichment of ibuprofen from biological samples. Chromosorb 107 gave the highest dynamic adsorption coefficient. Among the organic solvents examined, acetone gave the highest desorption coefficient. Using the Chromosorb 107 column, the optimum elution volume of the eluting solvent was evaluated from the breakthrough curve of ibuprofen. The usefulness of Chromosorb 107 as the solid adsorbent and acetone as the eluting solvent was examined for the solid-phase extraction of ibuprofen from serum in the concentration range of $20{\sim}40\;{\mu}g/ml$.

• YAKHAK HOEJI
• /
• v.39 no.4
• /
• pp.395-400
• /
• 1995

The sorption and desorption properties of four adsorbents were evaluated for the trace enrichment of clobazam from biological samples. Graphitized carbon black(GCB) gaved the highest dynamic adsorption coefficient. Among the six organic solvents examined, acetone gave the highest desorption coefficient for the clobazam adsorbed on GCB. Using the GCB column, the optimum elution volume of the eluting solvent was evaluated from the on-line monitored breakthrough curve for clobazam. When GCB as the solid adsorbent and acetone as the eluting solvent were used for the solidphase extraction of clobazam from serum, the recoveries were higher than 83% with good reproducibility in the concentration range of 20-50 $\mu\textrm{g}$/ml.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.293-298
• /
• 2000

${\beta}$-Glucan a kind of polysaccharide which is particularly abundant in Agaricus blazei is known as the bioactive materials especially anticancer agents. The process development of the isolation and the purification process of water soluble ${\beta}$-glucans from A. blazei was achieved. and the process operation variables were optimized. Crude polysaccharides (CR.PS) were obtained from A. blazei by hot water extraction filtration solvent precipitation dialysis and freeze drying. Neutral and acidic fraction of polysaccharides were separated from crude polysaccharides by ion chromatography and then high molecular weight and low molecular weight fraction were separated from neutral fraction by gel chromatography. Quantitative and qualitative analysis of each compounds were performed with FT-IR NMR spectroscopy. Based on these analysis the optimal conditions of temperatures operating time organic solvent volume for precipitation and dialysis time were determined.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.165-169
• /
• 2003

To extract alkali metal ions and heavy metal ions, search for crown ether model compounds (4a-b, 5a-b, 6a-b) bearing side arm has led to achieve in 5~6 steps starting from 2,6-dimethylaniline. The determination of structure in their compound derivatives were on the basis of melting point and nuclear magnetic resonance spectroscopy. In the solvent extraction of metal ions from the synthesized derivatives, we observed that silver ion has only high selectivity for synergistic ligation of crown ether.

• Environmental Analysis Health and Toxicology
• /
• v.22 no.1 s.56
• /
• pp.49-55
• /
• 2007

Three kind of ASE (Accelerated Solvent Extraction) and SPMDs (Semi-Permeable Membrane Devices) combined methods (ASE-SPMDs, ASE-accelerated SPMDs and SPMDs without extraction) and general Soxhlet-GPC were compared each other for the analysis of PCDD/FS in sediment. The average recovery rate of three types ASE and SPMDs combined methods (108.1%) were higher than that of the Soxhlet-GPC (79.5%) for three samples in each method using surrogate internal standards. The average coefficient of variation (10%, $2.1{\sim}25.2%$) for each congener of PCDD/Fs shows the reasonable results. Total PCDD/Fs concentrations after SPMDs without extraction were quite low, but those after ASE-SPMDs and ASE-accelerated SPMDs methods were close to the Soxhlet-GPC. Thus, the ASE-SPMDs and ASE-accelerated SPMDs methods are considered as the excellent pre-treatments method because they need less solvent and time without quality degradation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.1
• /
• pp.73-77
• /
• 1993

This study was intended to investigate the effects of solvents, particle size of a sample, sample to solvent ratio, temperature and time on the extraction of garlic oleoresin. Among eleven solvents used for oleoresin extraction from garlic, the optimal solvent was methyl alcohol. The most appropriate particle size of garlic, extracting temperature and mixing ratio of garlic to methyl alcohol were 20mesh, $25^{\circ}C$ and 1 to 3(w/w), respectively. On the basis of yield in oleoresin extraction, optimum extracting time was about 4 hours. The yield of oleoresin under the above-mentioned conditions was 21.3%. "L" and "b" as color appearance were decreased, whereas "a"was increased slightly during 60 days storage at 5$^{\circ}C$, $25^{\circ}C$ and 4$0^{\circ}C$. Changes in the pyruvate content showed close relation to pH value. During storage pyruvate content of garlic oleoresin was decreased as increasing storage temperature.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.189-195
• /
• 1999

A study on the separation Cu, Ni, and Co was carried out using LIX 84 leachate, chelate extractant. For this test, artificial test solution was prepared by varing concentrations of Cu, Ni, Co, $(NH_4)_2CO_3$ and $(NH_4)_2SO_4$. It found that pH of the solution was very important factor for the separation of nickel from copper. The results showed that nickel was effectively extracted from copper by using LIX 84 at pH 1.0 to 1.2. The volume ration or organic to aqueous phases was 1.0. According to the McCabe-Thiele diagram, the extraction rate of copper was 99 percents at the equal ratio of organic to aqueous phase in three stages.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.395-397
• /
• 1995

To investigate the effects of solvent extraction on electrical properties of LDPE, charge distribution, electrical conduction, and FT-IR experiments are carried out for three kinds of LDPE which are same for melt index (MI) and density. The effects of short chains for the charge distribution are quite different. For the electrical conduction, the electrical conduction mechanism remains unchanged, as the solvent extraction temperature is increased.