• Reproductive and Developmental Biology
• /
• v.33 no.3
• /
• pp.183-187
• /
• 2009

This study analyzed change of proteins in granulosa cells during the porcine follicuar development by proteomics techniques. Granulosa cells of the follicles, of which the diameter is $2{\sim}4\;mm$ and $6{\sim}10\;mm$, were collected from ovary of slaughtered pig that each follicle of diameter $1{\sim}4\;mm$ and $6{\sim}10\;mm$. We extracted glanulosa cell proteins by M-PER Mammalian Protein Extraction Reagent. Proteins were refined by clean-up kit and quantified by Bradford method until total protein was $200{\mu}l$. Immobilized pH gradient(IPG) strip used 18 cm, $3{\sim}10\;NL$. SDS-PAGE used 10% acrylamide gel. After silver staining, Melanie 7 and naked eye test were used for spot analyzation. Increasing proteins in glanulosa cell of $6{\sim}10\;mm$ follicle were 7 spots. This spots were analyzed by MALDI-TOF MS and searched on NCBInr. In results, 7 spots were similar to zinc/ling finger protein 3 precursor (RING finger protein 203), angiomotin, heat shock 60 kDa protein 1 (chaperonin) isoform 1 (HSP60), similar to transducin-like enhancer protein 1 (TLE 1), SH3 and PX domains 2A (SH3PXD2A). Those proteins were related with transfer between cells. Increase of proteins has an effect on follicular development.

• Analytical Science and Technology
• /
• v.33 no.3
• /
• pp.115-124
• /
• 2020

Marker pens belong to school things that are controlled by the regulation system called safety confirmation under special act on the safety of products for children with the formaldehyde criteria of 20 mg/kg. With nine marker pens available commercially, formaldehyde in marker pen ink was analyzed by present test standard where marking on a fabric swatch with a pen and extracting the swatch in water and derivatization with Nash reagent followed by UV/Vis spectrophotometeric measurement (Nash-UV/Vis method), giving not detected results or a false positive result in case of a colored water extract. However, the contents of formaldehyde in ink of nine marker pens were determinded to range between 3.2 ~ 93.2 mg/kg with three results above the safety criteria of 20 mg/kg by HPLC/DAD measurements on DNPH derivatives of formaldehyde (DNPH-HPLC/DAD method) in ink dissolved directly in water using an ultrasonic bath. Therefore, the DNPH-HPLC/DAD method with the extraction of ultrasonic dissolving ink in water is proposed as a proper method for analyzing formaldehyde in ink. The proposed method has advantages of lower detection limit and accuracy with colored extracts as well as a simple and fast extraction. The accuracy and precision of this method was estimated to be 90.1 ~ 105.4 % and 0.6 ~ 3.3 %, respectively by spiking tests in the ranges of 20 mg/kg and 40 mg/kg using matrixes such as highlighter pen ink, board marker ink, chalk marker pen ink and painter marker ink.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.91-99
• /
• 2013

Steel industry which has been accomplishes the base of our country economy, automobile and electronic industry are taking charge of the role, whose electroplating is important. Large amount of wastewater and various metal salts, including hazardous materials was generated from the electroplating pre-treatment, plating, washing and post-plating. Currently, the general wastewater follows in the environmental law and neutralization after controlling, sludge where the various metal is mixed reclaims below multiple regulative and trust it is controlling. The sludge which includes the gas price metal reclaims in the field and trust it controls. a reclamation price of land it is insufficient but and the control expense holds plentifully and it loses the gas price metal which is valuable. Consequently, The research regarding to recover a gas price metal actively from this waste water, it is advanced. A new method to recover valuable metals from electroplating wastewater synthesis of metal sulfides using topical methods utilizing iron oxidizing bacteria, reagent of sulfides and solvent extraction using an organic solvent, such as the development of the law to recover these metals and metal sulfides of wastewater using selective recovery have been studied. By using these wastewater treatment method under frequency above 95%, it has been obtained the valuable metal from the wastewater, where the metal ion of Fe, Cu, Zn and Ni complexes was mixed. As we discuss the wastewater, which has been discharged from electroplating process, it is important and will be applied to the resources of metal in the urban mine.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2004

To choose a organic acid and in-organic acid composite which is the most effective in soil-flushing process cleaning lead-contaminated sites, lead removal rates were investigated in the experiments with some organic acids; 0.01M of EDTA showed the highest lead-extraction rate ($69.4\%$) compared to the other organic acids. Furthermore, the lead removal rates were measured with 0.01M of EDIA and 0.1M of in-organic acid ; a EDTA and boric acid composite showed the highest lead-extraction rate ($68.8\%$) at pH5 compared to the other composites. As the concentration of boric acid was increased from 0.1M to 0.4M in a 0.01M of EDTA and boric acid composite, lead removal rate was decreased from $68\%\;to\;45\%$. But as the concentration of EDTA was increased from 0.01M to 0.04M in a EDTA and 0.1M of boric acid composite, permeability was decreased from $6.98{\times}10^{-4}cm/sec$ (0.01M of EDTA) to $5.99{\times}10^{-4}cm/sec$ (0.04M of EDTA). However, permeability was increased from $4.41{\times}10^{-4}cm/sec$ (0.03M of EDTA) to $6.26{\times}10^{-4}cm/sec$ (0.03M of EDTA and 0.1M of boric acid composite). indicating EDTA could increase lead dissolution/extraction rate and decrease permeability. In this system, lead remediation rate is the function of lead dissolution rate from soils and permeability of the composite into soils, and the optimized [EDTA]/[Boric acid] ratio is [0.01M]/[0.1M].

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.194-203
• /
• 2012

1-Ethyl-3-methylimidazolium acetate known as efficient biomass pretreatment reagent was used for the extraction of lignin from rigida pine wood (pitch pine), which was called to ionic liquid lignin (ILL), and chemical structural features of ILL were compared with the corresponding milled wood lignin (MWL). The amounts of phenolic hydroxyl groups (Phe-OH) was determined to 10.0% for ILL and 7.2% for MWL, respectively, where those of methoxyl groups (OMe) were 4.9% for ILL and 11.0% for MWL, respectively. The weight average molecular weight (Mw) of ILL (3,995) were determined to ca. 1/2 of that of MWL (8,438) and polydispersity index (PDI: Mw/Mn) suggested that the lignin fragments were more uniform in the ILL (PDI 1.36) than in the MWL (PDI 2.64). The temperature (Tm) corresponding to maximum decomposition rate (Vm) of ILL ($306.6^{\circ}C$) was ca. $35^{\circ}C$ lower than that of MWL ($341.9^{\circ}C$), suggesting that ILL was thermally unstable than MWL, as evidence from the lower Tm for ILL. Moreover, the structural characteristics of ILL and MWL were confirmed by spectroscopic analyses (FT-IR and $^{13}C$-NMR), and these results indicated ionic liquid (1-ethyl-3-methylimidazolium acetate) was chemically or physically bound to ILL.

• Reproductive and Developmental Biology
• /
• v.36 no.3
• /
• pp.219-223
• /
• 2012

The present study was performed to identify the relationship between plasminogen activator (PA) and Heat Shock Protein-90 (HSP-90) in porcine uterus tissues during the estrous cycle. Porcine uterus tissues were obtained from preovulatory (Pre-Ov), post-ovulatory (Post-Ov) and early to mid-luteal (Early-mid L) stages. The protein was extracted from uterus tissue by using M-PER Mammalian Protein Extraction Reagent. Proteins were refined by RIPA Buffer and quantified by BCA methods. As results, t-PA expression was significantly (p<0.05) higher from pre-ovulatory(Epithelium tissue: $29,067{\mu}g/{\mu}l$, Myometrium tissue: $30,797{\mu}g/{\mu}l$) compared to the post-ovulatory stage(Epithelium tissue: $54,357{\mu}g/{\mu}l$, Myometrium tissue: $53,270{\mu}g/{\mu}l$) and early to mid-luteal stage(Epithelium tissue: $42,380{\mu}g/{\mu}l$, Myometrium tissue: $43,139{\mu}g/{\mu}l$). On the other hand, the uPA expression indicated higher from early to mid-luteal stage (Epithelium tissue: $0.02198{\mu}g/{\mu}l$, Myometrium tissue: $0.02412{\mu}g/{\mu}l$) than pre-ovulatory stage (Epithelium tissue: $0.01577{\mu}g/{\mu}l$, Myometrium tissue: $0.01531{\mu}g/{\mu}l$) and post-ovulatory stage(Epithelium tissue: $0.01414{\mu}g/{\mu}l$, Myometrium tissue: $0.01429{\mu}g/{\mu}l$). However, expression of u-PA did not differ from each estrous cycle in the epithelium tissue and myometrium tissue(p<0.05). Expression of HSP-90 was differ t-PA and u-PA from pre-ovulatory in Epithelium tissue($25,423{\mu}g/{\mu}l$) and early to mid-luteal stage in epithelium tissue($177,922{\mu}g/{\mu}l$) and myometrium tissue($26,664{\mu}g/{\mu}l$). These results suggest that HSP-90 and u-PA were related with change of uterus cycle according to the reformation of the tissues in porcine uterus.

• Korean Journal of Pharmacognosy
• /
• v.9 no.3
• /
• pp.149-156
• /
• 1978

The result of the study about the cultivation, the constituents, the sweetenity, and the development of preparations of Stevia and Hydrangea are as follows: 1. Hydrangea thrived at $200{\sim}1,400m$ above the sea-level, and the good ones were brought up at $600{\sim}1,200m$. 2. The good ones which belonged to the genera of Hydrangea were produced in the damp, dark and cold place. 3. The growth and cultivated yield of Stevia was not significantly influenced by the acidity of the soil. 4. The best season was May and June for propagation of Stevia by cutting method. 5. The growth rate of Stevia and Hydrangea was really good in the sandy fertile soil, but in the mucotic soil it was not suitable. 6. The extraction and separation of phyllodulcin by solvent had many difficulties, because it was very soluble in water, ethanol, ether, petroleum ether, acetone and benzene, etc. 7. The solubility of stevioside on the solvent was as follows: It was very soluble in water and methanol, slightly soluble in ethanol and acetone, and insoluble in ether, petroleum ether and chloroform. 8. The alkaloid reaction by Mayer reagent in Hydrangea extract was positive. 9. The ashification rate of Stevia was 8.66% to 8.72% and that of Hydrangea 17.02% to 17.04%. 10. The tannin of Stevia leaf was 7.80% to 7.88% and its of Hydrangea decreased 9.46% to 6.08% by fermentation. 11. The percent rates in minimum concentration-occurring sweetness in sugar, glycyrrhiza methanol extract, Hydrangea water extract, Stevia leaf water extract, decoction of Stevia's leaf, decoction of Stevia's stem were as follows: 1.2, 0.1, 0.1, 0.2, 0.4, 0.01, 0.1, 0.6. and sweetenity ratios of those were 1, 12, 12, 6, 3, 64, 12, 2, 12. It was very meaningful to develop preparations of stevia as stevioside, micronized powder, water extract, methanol extract and compound teas and in Hydrangea, water extract, methanol extract, single tea, and compound teas were less meaningful. 13. The genera of Hydrangea which is natural species in Korea was positive in phyllodulcin-identification test, but it was not available to make the sweet tea because of having a little content.

• Food Science of Animal Resources
• /
• v.33 no.3
• /
• pp.417-424
• /
• 2013

A rapid and simple analytical method for the determination of 9 isomaltooligosaccharides (IMO) species in yoghurts was developed using dispersive solid phase extraction (dSPE) clean-up technic and high performance liquid chromatography with evaporative light-scattering detector (HPLC-ELSD). In this study, 9 IMO were extracted from samples simply with chemical reagent using ISO22662 IDF198 method and additional dSPE clean-up. The optimum instrument conditions for the determination were used carbohydrate ES $5{\mu}$ column with gradient elution of water and acetonitrile and ELS detector. The linearity of this method was expressed as the correlation coefficient ($r^2$), the results of IMO 9 species were shown in 0.9999. LOD and LOQ were respectively 7.9-22.1 mg/kg, 25.9-72.8 mg/kg. The accuracy of intra- and inter-day measurements were in the range from $84.3{\pm}4.5$ to $104.9{\pm}6.5%$, and the preceision of the intra- and inter-day measurements were in the range from 0.8 to 7.7%. The recoveries were from $84.3{\pm}4.5$ to $104.9{\pm}6.5%$. The determination results of IMO 9 species for the 9 yoghurts circulated in the market were in the range from $0.317{\pm}0.007$ to $1.624{\pm}0.050$ g/100 g. The newly developed method is appropriate for the determination of IMO in yoghurts, is a rapid and simple method with excellent resolution in compared with previous method.

• Journal of Food Hygiene and Safety
• /
• v.25 no.2
• /
• pp.118-121
• /
• 2010

A HPLC-MS/MS method was developed for simultaneous determination of six sweeteners (acesulfame-K, cyclamate, saccharin, sucralose, stevioside, aspartame) in children's favorite foods. The procedure involves an extraction of the six sweeteners with 50% methanol solution, sample clean-up using the Carrez clearing reagent and filtering with cartridge filter. The HPLC separation was performed on a Hypersil Gold (150 mm ${\times}$ 2.1 mm 5 um) column using the water/acetonitrile mobile phase (95:5). Mass spectrometric analysis was carried out using the TSQ Quantum Ultra operated in negative and positive ESI/SRM. With this method, good linear relationship, sensitivity and reproducibility were obtained. The spike recoveries of six sweeteners for 2 kinds of foods spiked into 0.4 mg/ kg ranged from 87.4 to 114.7%. The detection limits were above 0.02 mg/kg. The method has been applied to determination of six sweeteners in children's favorite foods.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.183-192
• /
• 2003

A transformation methode of the chromaticity coordinates was proposed to calibrate the measured data obtained by a urine analysis system which implemented in our previous study. Generally. the reacted color of a reagent strip by urine analysis system often exhibit the color distortions due to nonlinear characteristics of the various devices that is the optic module mechanism. hardware, and surround circumstance. A color correction method for minimizing the color distortion play a few role in maintaining high accuracy and reproduction of the urine analysis system. In this work, we used the compensation method such as the shading correction, the characteristic curve extraction of RGB color by means of third order spline interpolation, and linear transformation using a reference color. In addition, 1931 CIE XYZ color space was used to compensate the color of the measured data by a standard reference system as colorimeter. A compensation matrix was obtained so that the output values of the urine analysis system is nearly equal to that of a standard reference system for identical color sample. Color correction obtained by a urine analysis system which implemented in our previous study exhibited a good color accuracy when it was compared with the reference data. Observed result from an experiments on ten items or a urinalysis strip that color difference or between two urine analysis system was 1.28.