• 한국식품저장유통학회지
• /
• 제13권2호
• /
• pp.131-137
• /
• 2006

천마를 건강기능식품가공소재로서 효율적으로 이용하기 위해서는 가공 중 일어날 수 있는 유효성분의 파괴를 최소화하는 것이 필요하다. 본 연구에서는 전처리 과정중 추출조건별로 천마의 유효성분 함량 및 항산화적 특성을 반응표면분석법으로 모니터링하여 최적 추출조건을 설정하였다. 천마 열수 추출물의 vanillyl alcohol 함량은 추출온도 $91.07^{\circ}C$, 추출시간 2.64 hr 및 시료에 대한 용매비 15.16 mL/g에서 가장 높은 함량을 나타내었고, vanillin 함량은 $93.73^{\circ}C$, 2.58 ,21.56 mL/g에서 coumarin 함량은 $96.30^{\circ}C$, 3.84 hr, 19.88 mL/g에서 각각 최고의 함량을 나타내는 것으로 예측되었다. 총 페놀성 화합물의 함량은 추출온도 $98.14^{\circ}C$, 추출시간 3.20 및 시료에 대한 용매비 18.63 mL/g, 전자공여능에 대한 최적 조건은 $98.62^{\circ}C$, 3.82 hr, 16.46 mL/g 등으로 각각 나타났다. 각 변수에 대한 회귀식을 도출하여 공정 인자별 천마의 유효성분 및 항산화적 특성에 대한 최적 추출조건을 superimposing한 결과 추출온도 $90{\sim}100^{\circ}C$, 추출시간 $3{\sim}4hr$ 및 시료에 대한 용매비 $15{\sim}20mL/g$의 범위로 각각 예측되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권2호
• /
• pp.15-22
• /
• 2018

Aqua regia extraction for the quantification of heavy metals and As in contaminated soils was investigated as one of preliminary steps for on-site monitoring using sensor technology. Soil samples were taken from closed railway depot, closed mines, and closed refinery and various extraction conditions including $30^{\circ}C/15min$, $30^{\circ}C/30min$, $30^{\circ}C/60min$, $30^{\circ}C/120min$, $80^{\circ}C/15min$, $80^{\circ}C/30min$, $80^{\circ}C/60min$, $80^{\circ}C/120min$ were tested. The optimal extraction condition was determined as $80^{\circ}C/60min$ because the extraction efficiencies of Zn were relatively low and did not reach the targeted level (80-100% of original concentrations) for $30^{\circ}C$ conditions. It was found that the fractionation of heavy metals and As using the sequential extraction method was useful to understand the degree of metal extraction. In order to enhance the extraction efficiency within short extraction time, ultrasound technology using a 20 kHz horn-type sonicator was additionally used for $30^{\circ}C/15min$. It was revealed that ultrasound could significantly enhance the extraction efficiency and pulsed irradiation showed higher efficiency than continuous irradiation due to the less formation of bubble clouds. However high temperature condition ($80^{\circ}C$) was required to achieve high extraction efficiency for Zn in spite of the use of ultrasound.

• 생약학회지
• /
• 제53권4호
• /
• pp.202-206
• /
• 2022

Salidroside is a major phenolic glycoside of Acer tegmentosum (Aceraceae) and known to be a hepatoprotective compound. Extraction conditions are one of the most important factors to save time and cost from an economic point of view. For this reason, this study was conducted to optimize the extraction condition for maximum yield of salidroside. For optimization, three extraction factors such as ethanol concentration (%), extraction temperature (℃), and solvent to material ratio (mg/mL) were tested and optimized for maximum yield of salidroside using response surface methodology (RSM). The optimal condition was obtained as an ethanol concentration of 53.4%, an extraction temperature at 67.11℃ and a solvent to material ratio (mg/mL), 195.55 mg/ml. The salidroside yield under optimal conditions was found to be 1.59 mg/g dried samples, which were well-matched with the predicted value of 1.56 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of salidroside as hepatoprotective therapeutics.

• 한국약용작물학회지
• /
• 제16권6호
• /
• pp.446-454
• /
• 2008

An advanced extraction method by ultrasonic extraction with applied solid phase extraction (SPE) has been developed for the determination of simultaneous eight major ginsenosides, namely ginsenosides Rg1, Re, Rf, Rb1, Rg2, Rc, Rb2, and Rd in the root of Panax ginseng. Four extraction methods including n-BuOH reflux extraction (Method A), 70% EtOH reflux extraction (Method B), 50% MeOH reflux extraction with SPE (Method C), and 50% MeOH ultrasonication with SPE clean-up process (Method D) were investigated for the determination of eight major ginsenosides. Total contents of ginsenosides were highest by extraction of Method C as $2.408{\pm}0.011%$. However, Method D was evaluated as relatively simpler and more efficient method due to short extraction time, small solvent consumption and less expensive, compared to conservative reflux method. Ginsenosides were also satisfactorily separated with good resolution and the accuracy range was between 1.05 and 4.06% as relative standard deviation (RSD) by Method D. SPE condition and HPLC condition were further optimized for determination of eight major ginsenosides by the ultrasonic extraction method. Conclusively, ultrasonic extraction of 2 g sample of ginseng using ultrasonic bath and 1 loading for SPE was evaluated as proper condition for extraction of ginseng.

• 한국식품영양과학회지
• /
• 제27권4호
• /
• pp.687-692
• /
• 1998

To use onion(Allium cepa L.) residue as raw materials of food product, yields of onion-juice according to various extracting methods and optimal extracting condition of quercetin and its related glycosides were carried out. Onion juices gained by the methods of pressing, rotary crushing, freeze pressing and enzyme treatment. The yield by the method of enzyme treatment was higher than others. The yields of juice from fresh onion and heat-treated onion(8$0^{\circ}C$/10min) by pressing were 66% and 83%, respectively. Ethanol extraction of onion was efficient at 75$^{\circ}C$ and acetic acid extraction was proper at 3% concentration for 3 hours at 11$0^{\circ}C$. The onion extract was fractionated in the order of hexane, chloroform, ethylacetate and butanol to test flavonoids. The highest abundant flavonoids were found in ethylacetate and butanol fraction.

• 한국정밀공학회지
• /
• 제31권11호
• /
• pp.1031-1040
• /
• 2014

In this paper, a new condition diagnosis algorithm for the lens injection molding process using various features extracted from cavity pressure, nozzle pressure and screw position signals is developed with the aid of probability neural network (PNN) method. A new feature extraction method is developed for identifying five (5), seven (7) and two (2) critical features from cavity pressure, nozzle pressure and screw position signals, respectively. The node energies extracted from cavity and nozzle pressure signals are also considered based on wavelet packet decomposition (WPD). The PNN method is introduced to build the condition diagnosis model by considering the extracted features and node energies. A series of the lens injection molding experiments are conducted to validate the model, and it is demonstrated that the proposed condition diagnosis model is useful with high diagnosis accuracy.

• 대한본초학회지
• /
• 제28권4호
• /
• pp.1-6
• /
• 2013

Objectives : In other to determine the optimal extraction conditions, the various Bojungikgi-tang (BJIGT) decoctions prepared by different pressure levels and different extraction times were compared and evaluated in terms of the extract yield and the total soluble solid content. Methods : Decoctions were prepared by the pressure levels of 0 (non-pressurized) and 1 $kgf/cm^2$ (pressurized) for 60, 120 and 180 min. The extract yield and the total soluble solids content of decoctions were measured, and the amounts of the reference compounds in decoctions were investigated by the analysis using high performance liquid chromatography. Results : The extract yield and the total soluble solid content were higher in decoctions extracted by the pressurized method than those from decoction with non-pressurized method. The patterns of yield and contents showed a proportional increase to the extraction time. In analysis of the linear regression for four reference compounds such as liquiritin, nodakenin, hesperidin, and glycyrrhizin, the good linearity with the correlation coefficient more than 0.9999 was observed. The highest contents for four reference compounds were observed at 180 min of both the pressurized method and the non-pressurized method. Conclusions : This study suggests that the pressure in extraction method and the extraction time affect the compositional constituents in BJIGT decoctions. The extraction time of 180 min could be chosen in both pressurized and non-pressurized method as optimal extraction condition.

• 한국의류학회지
• /
• 제21권1호
• /
• pp.228-236
• /
• 1997

The browning characteristic and dyeability of the mushroom were examined to establish the optimum condition for browning and extraction in the process of obtaining the natural dye, brown colorant. The composition of browning extracts from mushroom was also analyzed and the dyeability were investigated. The results of this study are as follows, 1. The optimum condition for obtaining the browning colorant from mushroom was the crushed phase of sample. 2. The browning reaction by enzymes in mushroom was efficient at a temperature of 35$^{\circ}C$, a duratron period of 2 hr and pH of 8. 3. The optimum condition for extraction of browning extracts from browned mushroom was at 95$^{\circ}C$ and Ihr. 4. To analyze the content of browning extracts in the mushroom, three fractions were obtained from gel filtration using Sephadex G-25 and the fraction 1 was melanin and the fraction 3 was dihydroxyphenylanine (DOPA) and glutaminyldihydroxybenzene (GDHB) . 5. The turbidity in enzymatic browning extraction of mushroom increased depending on refrigeration storage (4$^{\circ}C$) and UV radiation. The filtration of the extracts resulted in a decrease of absorbance. 6. The dyeability of the fraction 1 was greater compared to that of the fraction 3 and that of wool greater compared to the other two fabric materiales.

• 한국전자파학회논문지
• /
• 제18권10호
• /
• pp.1203-1210
• /
• 2007

다중 빔 탐색 3D 레이다는 디지털 빔 형성 기술을 이용하여 수신시 적층 빔을 형성하는 최신의 3D 레이다 기술이다. 본 논문에서는 다중 경로 환경 상태에서 다중 빔 3D 레이다의 저고도 표적의 고도 추출을 위한 방법을 제안하고 고찰해 보고자 한다. 다중 빔 레이다에서 저고도 표적에서 발생하는 다중 경로 전파 및 레이다 신호 발생 모델링에 대해 기술하고, 거울 반사 상황에서 효과적으로 표적 고도를 추출하기 위해 nelder-mead simplex multipath reduction(NMSMR) 기법에 대해 기술한다. 제안된 알고리듬의 성능을 다양한 표적 고도와 레이다 주파수에 대해 시뮬레이션으로 확인하였다.

• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.451-460
• /
• 2017

본 연구는 구기자 항산화 성분의 최적 추출과 항산화 활성의 변화를 모니터링 하였다. 건조 구기자의 추출 조건은 에탄올 농도($X_1$, 0~80%) 및 추출 시간($X_2$, 1~5 hr)이며, 종속변수로는 수율, 안토시아닌, 플라보노이드 및 DPPH 라디컬 소거능으로 반응표면분석을 실시하였다. 가용성 고형분 수율, 안토시아닌, 플라보노이드 및 DPPH 라디컬 소거능에 대한 회귀식의 $R^2$은 각각 0.9066, 0.9859, 0.8645, 0.9464로 1~10%의 유의수준에서 유의성이 인정되었다. 건조 구기자 가용성 고형분 수율이 가장 높은 추출 조건은 에탄올 농도 8.25%에서 4.22 hr 추출한 것(23.12%)으로 나타났다. 안토시아닌이 가장 높은 추출 조건은 에탄올 농도 79.98%에서 3.06 hr 추출한 것(흡광도 1.43)으로 나타났다. 플라보노이드의 가장 높은 추출 조건은 에탄올 농도 67.02%에서 3.37 h 추출한 것($3,100{\mu}g/100g$)으로 나타났다. 그리고 DPPH 라디컬 소거능이 가장 높은 추출 조건은 에탄올 농도 69.81%에서 1.67 h 추출한 것(96.93%)으로 나타났다. 안토시아닌, 플라보노이드 및 DPPH 라디컬 소거능에 대한 등고선도를 겹쳐 그려 얻은 최적 조건(에탄올 농도 70% 및 추출 시간 2,5 hr)으로 추출된 추출물의 안토시아닌은 1.0080(흡광도) 이었으며, 플라보노이드 함량은 $3,145{\mu}g/100g$, 그리고 DPPH 라디컬 소거능은 97%로써 증류수로 1시간 추출한 대조구(안토시아닌 0.4652(흡광도), 플라보노이드 $1,633{\mu}g/100g$ 및 DPPH 라디컬 소거능 87%)에 비해 높은 항산화 성분 추출 및 항산화 효과를 나타내었다.