• The Journal of Korean Medicine
• /
• v.34 no.4
• /
• pp.12-20
• /
• 2013

Objectives: This study compared Gumiganghwal-tang (GGT) decoctions produced using different pressure levels for various extraction times to determine the optimal extraction conditions through hydrogen ion concentration (pH), total soluble solids content (TSSC), extraction yield, and content of chemical compounds. Methods: Decoctions were prepared by the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min. The pH and TSSC were measured, the extraction yield was calculated, and the amounts of the chemical compounds were determined using high performance liquid chromatography. Results: The higher pressure and longer extraction time decreased the pH value, while those conditions increased TSSC and extraction yield: the decoction produced in 180 min by pressurized method showed the minimum value of pH, but maximum values of TSSC and extraction yield. The chemical compounds showed higher amounts in decoctions produced by non-pressurized methods than pressurized methods and their amounts were decreased over the peak extraction time in both pressurized and non-pressurized methods. The results of regression analysis confirmed the correlative influences of the pressure and extraction time on pH, TSSC, and extraction yield. Conclusions: This study suggests that pressure and extraction time influence the compositional constituents in GGT decoctions, and the non-pressurized method for 120 min should be chosen as the optimal extraction condition for the preparation of GGT decoction.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.3
• /
• pp.385-392
• /
• 1996

The soluble solid of red pepper was extracted by water in order to investigate changes of soluble solid content by different extraction temperature $(4{\sim}90^{\circ}C)$ and time $(1/2{\sim}3\;hrs)$, and the contents of carotenoid, capsaicinoids, free sugar, organic acid, free amino acid in soluble solid were measured. Most of soluble solid in red pepper was extracted within the first 2 hrs and $93{\sim}98%$ of total soluble solid was extracted during the first 30 min. The contents of carotenoid increased by increasing extraction time and temperature, but decreased by increasing extraction time at $60^{\circ}C$ and $90^{\circ}C$. ${\beta}$-carotene content was sharply decreased after 2 hrs at $90^{\circ}C$. The content of capsaicinoid was sharply increased between 1 hr and 2 hr. Fructose and glucose in red pepper were extracted in the range of $83.8%{\sim}96.4%$ and the contents of free sugar gradually increased by increasing extraction time and temperature. The content of organic acid was gradually increased by increasing extraction time and temperature and the greatest amount of organic acid was extracted during the first 30 min of extraction time. The content of free amino acid was decreased by increasing extraction temperature.

• Herbal Formula Science
• /
• v.22 no.2
• /
• pp.15-24
• /
• 2014

Objectives : Gwakhyangjeonggi-san (GJS) which consists of 13 herbal medicines has been used to treat gastrointestinal disorders caused by common cold. This study was performed to compare GJS decoctions produced using different pressure levels for various extraction times. Methods : Decoctions were prepared by the pressure levels of $0kgf/cm^2$ (non-pressurized) or $1kgf/cm^2$ (pressurized) for 30-180 min. The extraction yield, total soluble solid content (TSSC), and hydrogen ion concentration (pH) were measured, and the contents of the nine marker compounds were determined using high performance liquid chromatography. Results : The higher pressure and longer extraction time significantly increased TSSC value, while decreased the pH value. However, only extraction time affected the extraction yield of pressurized decoction. Variation of the amounts of chemical compounds was shown in pressurized and non-pressurized decoctions during extraction time. The result of regression analysis showed that pressure and extraction time can influence to extraction yield, TSSC, pH, and the content of chemical compounds. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GJS decoctions.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.4
• /
• pp.263-270
• /
• 2016

Background: In this study, microwave extraction was used, which is an effective method to extract useful bioactive substances as it requires low quantities of solvent and short time periods. The aim of this study was to determine the optimal extraction conditions for Agrimonia pilosa Ledeb. Methods and Results: The independent variables were ethanol concentration, microwave power, and extraction time, each of which had five levels. The dependent variables were total polyphenol and total flavonoid content, and DPPH radical scavenging activity. To determine the optimal extraction conditions for bioactive compounds, a response surface methodology was employed. Contour maps were generated from polynomial equations. The optimal conditions were then assumed by superimposing these contour maps. Based on the resulting graph, the optimal microwave extraction conditions for Agrimonia pilosa Ledeb were determined as 42 - 48% ethanol concentration, 240 - 280W microwave power, and 13 - 20 min of extraction time. Conclusions: Ethanol concentration had a significant effect on microwave extraction, in terms of total polyphenol and total flavonoid content, as well as DPPH radical scavenging activity. Microwave power and extraction time influenced the total polyphenol content, but not the total flavonoid content or the DPPH radical scavenging activity.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.1
• /
• pp.180-184
• /
• 2013

Recently, silk sericin has attracted the attention of researchers owing to its useful properties as a biomaterial including 1) good wound healing and cell activities, 2) fast gelation character, and 3) high water retention property. In the present study, silk sericin was prepared using different extraction times in hot water and the effect of extraction time on the rheological properties of sericin solutions and gels was examined. It was found that the production yield of sericin increased with extraction time. The shear viscosity of sericin solutions and gels decreased with increasing extraction time due to a decrease in sericin molecular weight. When the sericin solution transformed to a gel, the viscosity increased and the shear thinning behavior was more evident. In addition, the shear stress measurements indicated that the slip between the sericin samples and the measuring plate of the rheometer was increased by the gelation of sericin. The compression strength of sericin gel could be increased remarkably (by more than 100 fold) by preparation using the freezing and thawing method.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.33 no.2
• /
• pp.1-12
• /
• 2020

Objectives: This study was conducted to find out the optimal extraction time for Artemisia argyi. Methods: The compositional pattern was compared with HPLC (High Performance Liquid Chromatography) and GC (Gas-Chromatography) by decocting Artemisia argyi 10, 60, 120 minutes respectively. Results: With longer extraction time, the contents of reference compounds were extracted 1.1 times more when 3,4-dicaffeoylquinic acid was extracted for 60 minutes than when extracted for 10 minutes in HPLC test, but the contents were reduced when extracted for 120 minutes compared to 60 minutes extraction time. 3,4-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid, 4,5-di-O-caffeoylquinic acid, jaceosidin, and eupatilin showed the largest yield rate when extracted for 10 minutes, and it decreased as time passed. The contents of chlorogenic acid, 3,5-dicaffeoylquinic acid, 4,5-dicaffeoylquinic acid, jaceosidin, scoparone, and eupatilin were detected only in 10 minutes extraction but not in 60 or 120 minutes extraction according to GC test. Conclusions: The results show that extraction time could affect the physicochemical characteristic or composition of Artemisia argy extracted. Thus, short extraction time could be useful for decoction of Artemisia argyi.

• Korean journal of food and cookery science
• /
• v.7 no.1
• /
• pp.27-34
• /
• 1991

This study attempted to set up reasonable extraction time of Omija that was put in water for the various components to soak out. Changes of free sugars, organic acids, reducing sugar, total acid and tannin in Omija with various extraction times were investigated (together with the analysis of each components in Omija fruit). 1. High Performance Liquid Chromatography showed fructose, glucose, and sucrose to be the major free sugars of the Omija fruit. Free sugars and reducing sugar value in Omija beverage increased gradually in according with the extraction time, and marked 75.6% per total free sugars and 82.1% per total reducing sugar at 12 hours. 2. Gas Chromatography showed lactic acid, oxalic acid, fumaric acid, levulinic acid, succinic acid, malic acid, citric acid and pyroglutamic acid to be the major organic acids of the Omija fruit. Organic acids and total acids value in Omija beverage increased gradually on proportion to extraction time, and marked 97.0% per total organic acids at 9 hours and 79.0% per total acids at 12 hours. 3. Tannin content in Omija beverage was increased when extraction time was longer but it showed a low percentage as compared with the reducing sugar and total acid. Tannin content marked 48.8% per total tannin at 12 hours. 4. Sensory evaluation revealed that !1 hours of extraction produced the best quality products based in taste, flavor, color and over-all acceptability, considering the data, it seems possible to conclude that the optimum of time for extraction of Omija to water is 9 hours.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.121-129
• /
• 2007

This study was conducted to elucidate extraction efficiency by microwave technique in comparison with sonication technique for extraction of insecticide residue in pear. In the analysis of the extraction efficiency of microwave for a pear spiked with imidacloprid, the extraction efficiency by microwave power of 300 W with extraction temperature of $80^{\circ}C$, heating time of 1 to 3 minute was shown to be similar with the extraction time 20 minutes by sonication. The optimal condition. in consideration of economical condition and treatment time, for microwave extraction of imidacloprid in the pear were 300 watts of power supply, $100^{\circ}C$ of extraction temperature, 1 minute of heating time and 10 mL of acetone volume. A new microwave vessel was developed to rapidly process the sample of the insecticide imidacloprid residues in the pear. This vessel was designed to include a reaction chamber and a filtration equipment, and a gathering chamber. The system could curtail a pretreatment time to 21 minutes than sonication and 7.9 minutes than the previous microwave vessel.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.60-67
• /
• 2000

This study was conducted to elucidate extraction efficiency by microwave in comparison with Soxhlet for extraction of pesticide residues in dried medical herbs; red-ginseng, white-ginseng, Bupleuri Radix, Angelica gigas Nakai, Rehmannia glutinosa. The acetone extraction by microwave of tolclofos-methyl and quintozene in medical herbs was efficient. The extraction efficiency by microwave with power 45 to 150 watts, extraction time 1 to 5 minutes and solvent volume 30 ml was compared with that of Soxhlet with extraction time 7 hours and solvent volume 150 ml. The extraction efficiency by microwave with extraction time 3 to 5 minutes was similar with extraction time of 7 hours by Soxhlet. When medical herbs spiked with tolclofos-methyl and quintozene was analyzed to how the extraction efficiency of microwave by kind of medical herbs, the extraction efficiency by microwave with extraction time of 3 to 5 minutes was the same as Soxhlet extraction. The optimal condition for extraction of tolclofos-methyl and quintozene in medical herbs by microwave was 45 to 90 watts of power supply, 3 to 5 minutes of extraction time and acetone 30 ml of solvent volume.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.2
• /
• pp.93-98
• /
• 2022

To assess the feasibility of silk sericin for non-textile application, the storage stability and biological safety of sericin were examined. It was extracted at 37℃, 70℃, 100℃, and 121℃ for 1, 3, and 5 h to elucidate the effect of extraction condition on the stability and safety of silk sericin. The solubility was increased till approximately 26% with extraction temperature of 121℃ for 1 h. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that the molecular weight distribution depended on the extraction conditions. Extracted sericin displayed typical UV absorption bands upon spectrometric analysis. To examine the reproducibility of its obtained conformation, sericin was extracted thrice and its circular dichroism (CD) spectra was measured each time. Most CD spectra showed reproducibility regardless of temperature and time except under 100℃ extraction condition. The diversity of CD spectrum showed gradual reduction and was finally coincident with extraction time from 1 to 5 h. Notably, sericin has a negative peak of approximately 200 nm attributed to random coil conformation, regardless of extraction condition. However, at the 100℃ extraction condition, sericin showed both bands to be negative bands of approximately 200 and 220 nm, respectively. Sericin was centrifuged to determine the stability of storage conditions. The sericin extracted at 100℃ and 121℃ for 1 h was found to form gel rapidly within 1 h, but at 121℃ condition, the gel fraction was approximately 20% within 1 h which retained its phase regardless of storage time. The gel fraction of sericin extracted at 100℃ for 5 h increased with time, however at the 121℃ for 5 h condition, the gel fraction was measured to be less than 10% regardless of increase in storage time. Petriflim^TM AC plates test showed that sericin was safe from aerobic bacteria activity by extraction under high temperature.