• Plant Resources
• /
• v.6 no.3
• /
• pp.221-226
• /
• 2003

To improve industrial scale extraction method for extraction of icariin from Epimedium koreanum Nakai, the yields under different extracting conditions such as solvent, temperature, duration and solvent to plant material weight ratio were compared. Regarding extracting solution, highest extracts and icariin yield could be achieved when 10% EtOH was used. In case of plant material to extracting solvent ratio, no significant differences could be observed from 1/10 to 1/50, indicating 1/10 was the most efficient. Extracting temperature significantly affected extracts and icariin yields in that 9$0^{\circ}C$ increased the collected extracts and icariin contents up to 29.6% and 0.76%, respectively, compared to 27.2%, 0.33% at 7$0^{\circ}C$. The yield of extracts was less dependent upon extracting temperature compared to icariin yield. Regarding extraction time, 4 hr and 6 hr resulted in high extracts and icariin yield, respectively. We found extracting Epimedium koreanum Nakai in 10 times volume of 10% EtOH for 4 and 6 hr at 9$0^{\circ}C$ seem to be relatively efficient methods for extracts and icariin, respectively.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.13-19
• /
• 2009

The purpose of this study was the efficient use of the black rice bran for dyeing textiles. For this purpose, we investigated proper extracting conditions of black rice bran, dyeability and dyeing fastness of dyed silk fabrics. To find proper extracting condition of black rice bran, we extracted black rice bran with water at different temperatures($40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$), different extracting pH(pH3, pH4, pH5, pH6) and extracting time(20, 40, 60, 80, 100, 120, 140, 160, 180min.). Also we investigated the effect of dyeing time(1, 2, 3, 4, 5, 6hr.), dyeing temperature($40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$) and mordanting method(non, pre, sim, post) to examine dyeability and dyeing fastness of dyed silk fabrics. As a result, when the extracting temperature and time were $80^{\circ}C$, 3hr., respectively, extracting was best. And the higher the extracting concentration, the more the extracting amount. As the dyeing temperature and time were higher and longer, the dyeability of silk fabrics was better. With mordant, the dyeability was improved and when using premordant method better, the K/S value was maximized. The laundering fastness of the silk fabrics dyed with black rice bran was estimated to have a good grade of 3~4, however, the light fastness was poor to have a grade of 1~2.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.50-56
• /
• 2003

This research was performed to select an appropriate agent to extract preservative components from CCA-treated wood, and then to evaluate the effect of reagent concentration, extracting temperature, and extracting time on the removal of chrome, copper, and arsenic from treated wood. Hydrogen peroxide was selected as the best extracting agent when considered extraction yield as well as use and environmental safety. Its extraction yield was dependent on extracting variables (temperature, concentration, and time), and a highly significant interaction existed among variables. It should be possible to optimize extraction by manipulating these extracting variables. The results may suggest that the required temperature conditions for the reasonable removal of CCA components are at least above 40℃ because extracting time is too long at low temperature (20℃). Reagent concentrations for extracting at above 40℃ should be decided by considering the extracting time.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.1
• /
• pp.31-37
• /
• 2001

Human psychovisual phenomena involved in extracting features is more sensitive in dark regions than in bright regions Therefore, feature extracting operators should be considered local intensities in order to perceive objects analogous to human vision system. Generally, conventional feature extracting operators have some handicaps like an computational complexity or multivariable needs. In this paper a novel feature extracting operator is proposed to overcome these demerits. This operator could be implemented very simply and be proved good performances through experiments applied to synthetic and real images.

• YAKHAK HOEJI
• /
• v.5 no.1
• /
• pp.66-67
• /
• 1960

The apparatus devised by the author (fig. 1B) was found a simple and effective one for extracting Genistin from Soy Bean.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.256-260
• /
• 2008

In this study, the composition of saponin and physico-chemical properties of Korean red ginseng extract was analyzed based on various extracting conditions. The total saponin and individual ginsenoside concentration of the red ginseng extract showed a decreasing trend as the extracting temperature and time increased; also, the extracting condition at $75^{\circ}C$ for 24 hours showed the highest concentration. In contrast, the concentration of $Rg_3$ increased as the extracting temperature and time increased within the particular range. It was suggested that a certain part of ginsenosides changes to $Rg_3$ according to extracting conditions; thus, the concentration of $Rg_3$ increased. Physico-chemical properties of Korean red ginseng extract based on the extracting conditions were different compared to those for saponin; so, as the extracting temperature and time increased, brix and color difference increased but pH decreased indicating stabilization of the overall quality of the product. Therefore, the most appropriate extracting condition for both the product quality of Korean red ginseng extract and stable extraction of saponin was $80^{\circ}C$ within 48 hours, minimizing the loss of ginsenosides.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.65-68
• /
• 2000

This paper describes an approach for extracting invariant features using a view-based representation and recognizing an object with a high speed search method in FLIR. In this paper, we use a reformulated eigenspace technique based on robust estimation for extracting features which are robust for outlier such as noise and clutter. After extracting feature, we recognize an object using a partial distance search method for calculating Euclidean distance. The experimental results show that the proposed method achieves the improvement of recognition rate compared with standard PCA.

• MALSORI
• /
• no.53
• /
• pp.17-35
• /
• 2005

A New Method of Extracting the Filter Characteristics of the Nasal Cavity Using Homorganic Nasal-Stop Sequences: A Preliminary R eportHansang ParkThis study provides a new method of extracting the filter characteristics of the nasal cavity. Korean lenis stops are realized as voiced in the homorganic nasal-lenis stop sequences between vowels. Since the only difference between the two members of the homorganic nasal- lenis stop sequences, such as [mb], [nd], and [ g], is whether the passage to the nasal cavity is open or not, the subtraction of the LPC spectrum of the voiced stop from that of the preceding nasal leads to the filter characteristics of the nasal cavity of an individual speaker regardless of place of articulation. The results suggest that various attempts should be made to extract a robust filter characteristics of the nasal cavity by giving variation to LPC coefficients and by paying particular attention to speech samples. This study is significant in that it provides a preliminary report about a new method of extracting the filter characteristics of the nasal cavity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.4
• /
• pp.340-345
• /
• 2003

In order to choose the manufacturing method for extracting alginates from sea tangle, Laminaria japonica, three methods were applied. In Method I, alginates were extracted with NaOH solution from sea tangle powder and extracted alginates were precipitated and converted to alginic acid by $CaCl_2$ and HCI solution. Then alginic acid was converted to sodium alginates with $Na_2CO_3$ solution. Sodium alginates were precipitated with methyl alcohol and were resolved with hot water and this step was repeated three times. Method II was same to Method I except final step including that sodium alginates were precipitated and washed with methyl alcohol three times. Method III included that sodium alginates were extracted with $Na_2CO_3$ solution from sea tangle powder then sodium alginates were precipitated and washed with methyl alcohol three time. Extracting time increased with Increasing extracted alginates amounts but increasing rates were below $0.4\%/h.$ Alginates amounts recovered by Method III showed above 2 times more to those by Method I and II. Extracting time increased with increasing ash amount of sodium alginates but increasing rates were below $0.1\%/h.$ and that of sodium alginates extracted by Method III showed higher value $(5\%)$ than those by Method I and II. In the sodium alginates prepared by Method III, the amount of ash in alginates dried by air was $34.4\%,$ that by vacuum freeze drying was $47.8\%.$ Extracting time increased with decreasing average molecular weight (MW) and degree of polymerization (DP) of sodium alginates, MW and DP of alginates prepared by Method III were higher than those by Method I and II In same extracting time. Extracting time increased with decreasing rate of apparent viscosity change (SAV) of alginates solution, and SAV of alginates prepared by Method III showed higher value than those by Method I and II in same extracting time. SAV of alginates dried by air was higher than that by vacuum freeze drying. Relating equation among SAV MW and DP were MW = 60.066 (SAV) -93.950, DP =309.760 (SAV) -485.084 and MW = 0.914 (DP)+0.213.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.5
• /
• pp.559-565
• /
• 1988

A new valley operator is presented for extracting sketch features which contain valleys and edges subject to local intensities. It is a very simple operator using the local probablities in a 3x3 local window. Experimental results show its excellent performance over the existing valley or edge operators.