• Journal of Microbiology and Biotechnology
• /
• 제19권11호
• /
• pp.1369-1373
• /
• 2009

Succinic acid was produced by continuous fermentation of Actinobacillus succinogenes sp. 130Z in an external membrane cell recycle reactor to improve viable cell concentration and productivity. Using this system, cell concentration increased to 16.4 g/l at the dilution rate $0.2\;h^{-1}$, up to 3 times higher than that of batch culture, and the volumetric productivity of succinic acid increased up to 6.63 g/l/h at the dilution rate $0.5\;h^{-1}$, 5 times higher than that of batch fermentation. However, in the continuous culture using a high dilution rate, operational problems including severe membrane fouling and contamination by lactic acid producer were observed. Another succinic acid producer, Mannheimia succiniciproducens MBEL55E, was also utilized in this system, and the cell concentration and productivity of succinic acid at the dilution rate of $0.3\;h^{-1}$ were found to be above 3 and 2.3 times higher, respectively, compared with those obtained at the dilution rate of $0.1\;h^{-1}$. These observations give a deep insight into the process design for a continuous succinic acid production by microorganisms.

• 대한의용생체공학회:의공학회지
• /
• 제26권6호
• /
• pp.357-363
• /
• 2005

Active contour models have been extensively used to segment, match, and track objects of interest in computer vision and image processing applications, particularly to locate object boundaries. With conventional methods an object boundary can be extracted by controlling the internal energy and external energy based on energy minimization. However, this still leaves a number of problems, such as initialization and poor convergence in concave regions. In particular, a contour is unable to enter a concave region based on the stretching and bending characteristic of the internal energy. Therefore, this study proposes a method that controls the internal energy by moving the local perpendicular bisector point of each control point on the contour, and determines the object boundary by minimizing the energy relative to the external energy. Convergence at a concave region can then be effectively implemented as regards the feature of interest using the internal energy, plus several objects can be detected using a multi-detection method based on the initial contour. The proposed method is compared with other conventional methods through objective validation and subjective consideration. As a result, it is anticipated that the proposed method can be efficiently applied to the detection of the pulmonary parenchyma region in medical images.

• 기술혁신연구
• /
• 제18권1호
• /
• pp.153-175
• /
• 2010

기업은 경쟁우위를 확보하고 지속적인 성장을 이끌기 위해 기술개발을 위한 R&D 투자 및 혁신활동에 집중해야 한다. 그러나, 기업의 이러한 활동은 언제나 성공하는 것이 아니며, 기술개발의 위험도가 높고 이익의 전용가능성이 낮거나 기업내부의 역량이나 자원이 부족할 경우, 기업의 혁신활동은 저해되기 쉽다. 이러한 상황에서 외부파트너와의 연구협력은 이러한 문제들을 해결할 수 있는 좋은 전략이라고 할 수 있다. 본 연구에서는 한국의 제조업체를 대상으로 각 기업이 기술혁신을 위해 연구협력을 선택할 때 어떤 요인들이 연구 협력결정에 영향을 미치는지를 분석하였다. 이를 위해서 과학기술정책연구원(STEPI)에서 수행한 기술혁신조사 데이터를 활용하였으며, 분석결과 기업의 규모가 클수록, 과거의 연구 협력경험이 많을수록, 하이테크 기업에 속한 기업일수록 연구협력을 통해 제품혁신을 수행하는 것으로 나타났으며, 혁신실패의 위험성, 자금조달의 어려움, 조직내부의 역량부족, 외부환경요인 등과 같은 혁신활동저해요소들은 제품혁신활동 수행시 외부와의 연구협력에 영향을 미치지 못하는 것으로 나타났다.

• 한국항공우주학회지
• /
• 제39권8호
• /
• pp.702-710
• /
• 2011

본 연구에서는 외부유동현상 해석에 오픈 소스 기반의 전산유체역학 프로그램인 OpenFOAM의 적용가능성을 검토하였다. 이를 위해 초음속, 천음속, 아음속 유동 영역에서 각 부분에 대표적인 해석 케이스를 선정하고 OepnFOAM에서 제공하는 해석자를 사용하여 해석을 수행했으며 해석 결과를 실험 결과 및 타 전산유체역학코드와 비교하였다. 충격파가 발생하는 초음속과 천음속 영역에서 충격파 예측의 정확도를 확인할 수 있었으며 경계 조건에 따른 결과의 정확도를 비교하였다. 아음속 유동 영역에서는 큰 박리가 일어나는 해석 케이스를 선정하여 복잡한 유동장하에서 OpenFOAM의 해석 정확도를 확인하였다. 위의 연구 결과를 바탕으로 OpenFOAM의 활용가능성과 한계를 확인하였고 이를 바탕으로 향후 OpenFOAM을 기반으로 수행할 연구 내용을 제시하였다.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.39-46
• /
• 2006

The purpose of this study was to determine the effects of slump sitting postures on the masticatory, neck, shoulder, and trunk muscles associated with work-related musculoskeletal disorders (WRMD). Eleven healthy adults (age, $23.3{\pm}2.7$ yrs; height, $174.0{\pm}4.1$ cm; weight, $61.4{\pm}6.6$ kg) participated in this study. The participants were free of injury history and neurologic deficits in the masticatory, neck muscles and upper extremities at the time of participation. The subjects were asked to perform erect and slump sitting postures under the guidance of physical therapists. The surface electromyography (EMG) was recorded from the anterior temporalis, masseter, upper trapezius, serratus anterior, middle trapezius, L3 paraspinal, external abdominal oblique, gluteus maximus muscles of 11 adults as they performed visual terminal display work, which are known as the weakened and tightened muscles owing to WRMD. The recorded signals were averaged and normalized to the mean amplitude of the EMG signal obtained during submaximal reference voluntary contractions. The results of study were as follows: The masseter, upper trapezius, serratus anterior, middle trapezius, L3 paraspinal, external abdominal oblique muscles significantly differed in the slump sitting posture (p<.05). The muscle activities of the serratus anterior, middle trapezius muscle, and external abdominal oblique were significantly lower and that of the masseter, upper trapezius, L3 paraspinal muscles were significantly higher. Further research is needed to assess the motor control problems and the function of the deep muscles in posture stability of patients with WRMD.

• 한국환경교육학회지:환경교육
• /
• 제19권1호
• /
• pp.80-89
• /
• 2006

The purpose of this study is to elucidate the concept of the internal value of environmental education (EE), and to present a new concept of 'Inquiry-Based EE' as a method to realize the internal value of EE. Since the introduction of EE, the 'external' value has been overwhelmingly present, as is shown in the commonly expressed purpose of EE. The ultimate goal of EE has been considered as to solve environmental problems through educational approach, which is important, but external value in relation with education. Generally, education has its own value, which may be more important than external value. But in EE area, that idea has not been discussed much. So, this study argued that EE has, or should have, the internal value of education. This study also examined the concept of inquiry, and presented it as two types of inquiry: the scientific inquiry and the 'insightful inquiry', and argued that the insightful inquiry is important as well as scientific inquiry in EE. Then, this study presented a new concept of 'inquiry-based EE', which can be defined as EE that is based on both the scientific and insightful inquiries, and makes the student be able to 'see' the world with the environmental world view. Lastly, this study presented also a new concept of 'Environmental Studies for EE, (ESEE)'. This means that the traditional environmental science is considered to be not well developed under the perspective of EE. From this viewpoint, this study presented the needed contents of the conceptually presented ESEE. In short, this research asserts that 'inquiry-based EE' is needed to make students 'see' the world environmentally, which is the very important value of EE, the internal value of EE, not very much examined. The 'inquiry-base EE' is considered to possibly advance EE as a new paradigm.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.197-206
• /
• 2006

Statement of problem: One of common problems associated with single teeth dental implant prosthetic is the loosening of screws that retain the implants. Purpose: The maintenance of screw joint stability is considered a function of the preload achieved in the screw when the suggested initial tightening torque is applied. The purpose of this study was to investigate acquired preload after initial clamping torque for estimating screw joint stability. Material and methods: A comparative study on the effect of initial clamping of two types of implant systems with different connections was conducted Three dimensional non-linear finite element analysis is adopted to compare the characteristics of screw preloads and stress distributions between two different types of implant systems composed with abutment, screw, and fixture under the same loading and boundary conditions. Results: 1. When the initial clamping torque of 32Ncm was applied to the implant systems, all types of implants generated the maximum effective stress at the first helix region of screw. 2. Morse taper connection types of implants generate lower stress distributions compared to those by butt joint connection types or implants due to large contact surface between abutment and fixture. 3. The internal types of implant systems with friction grip type implant systems have higher resistance to screw loosening than that of the external types of implant systems since the internal types of implant systems generated larger preload than that generated by the external types for the same tightening moments.

• 한국항공우주학회지
• /
• 제37권3호
• /
• pp.232-239
• /
• 2009

군용항공기에 탑재된 외부무장은 필요시 투하되기 위해서는 무엇보다도 먼저 안전한 분리가 이루어져야한다. 따라서 이러한 외부 장착물의 안전한 분리는 여러 가지 실험을 통해 사전에 반드시 검증이 이루어져야 한다. 본 논문은 전투기에 장착한 외부 장착물이 전투기로부터 분리 될 때 안전한 분리가 이루어지는가를 풍동실험을 통해 검증하기 위한 연구를 수행하였다. 이러한 무장분리문제와 관련된 풍동실험 기법으로 널리 활용되고 있는 자유낙하실험과 Grid test 기법을 사용되었다. 본 논문에서는 이러한 각 풍동실험 기법의 수행절차를 기술하고 각 기법의 실험결과로써 얻어진 데이터를 통해 무장투하가 사출기의 작동 여부와 관계없이 안전하게 분리됨을 확인하였으며, 각 기법에서 얻어진 결과가 모두 안전 제한치 내에 있음을 확인할 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• 한국물환경학회지
• /
• 제27권4호
• /
• pp.461-466
• /
• 2011

The feasibility of utilizing food waste leachate as an external carbon source was tested to enhance biological nutrient removal from an industrial wastewater with an average flow rate of $164,800m^3/d$ and a low carbon/nitrogen ratio of 2.8. A considerable improvement in the removal of nitrogen and phosphorus was observed when a certain amount of the leachate, ranging from 70 to $142m^3/d$, was supplemented to the biological industrial wastewater treatment process. The addition of the leachate led to an increase in the BOD/N ratio (4.5) and the removal efficiency of nutritents from 29.7% to 71.7% for nitrogen and from 34.8% to 65.6% for phosphorus. However, an excessive dose of the leachate that significantly exceeded $120m^3/d$ caused serious operational problems, like oil-layer formation in the grit chamber and scum layer in the primary clarifier. Thus, an supplement of food waste leachate at a dose acceptable to an existing facilities can be a practical and effective means to enhance the nutrient removal from industrial wastewater and to dispose of the food waste leachate.