• 제목/요약/키워드: External oscillation

검색결과 97건 처리시간 0.022초

도파로 어레이 격자를 이용한 광섬유 브래그 스트레인 센서의 반사파장 신호 복원 기술 (Wavelength Interrogation Technique for Bragg Reflecting Strain Sensors Based on Arrayed Waveguide Grating)

  • 서준규;김경조;오민철;이상민;김영제;김명현
    • 한국광학회지
    • /
    • 제19권1호
    • /
    • pp.68-72
    • /
    • 2008
  • 광섬유 브래그 격자(fiber Bragg grating: FBG)를 이용한 스트레인 센서는 출력 값으로 브래그 반사 파장의 변화를 제공하게 된다. 본 논문에서는 브래그 격자 스트레인 센서에서 출력되는 빛을 도파로 어레이 격자(arrayed waveguide grating: AWG)에 입력시켜서 파장의 변화를 측정하는 방법을 제안한다. FBG에 스트레인이 가해지게 되면 브래그 반사 파장이 이동하게 되어 AWG를 지나서 출력되는 채널별 광 파워가 변하게 되며, 이 값들의 조합으로 구해지는 centroid 값을 계산하면 브래그 반사 파장과 인가된 스트레인 값을 얻을 수 있다. 브래그 격자의 반사 스펙트럼의 대역폭이 centroid 값에 미치는 영향을 고려하여 3-dB 대역폭이 5.4 nm인 chirped FBG를 사용하였으며, 저항 측정방식의 기존 스트레인 센서와 비교하여 오차범위가 2% 이내인 결과를 확인 하였다. FBG 센서를 외팔보에 부착하여 진동에 따른 스트레인 값을 실시간으로 측정한 결과 진동 주파수 17.8 Hz, damping 시상수 0.96 초를 얻을 수 있었다.

W-Band MMIC chipset in 0.1-㎛ mHEMT technology

  • Lee, Jong-Min;Chang, Woo-Jin;Kang, Dong Min;Min, Byoung-Gue;Yoon, Hyung Sup;Chang, Sung-Jae;Jung, Hyun-Wook;Kim, Wansik;Jung, Jooyong;Kim, Jongpil;Seo, Mihui;Kim, Sosu
    • ETRI Journal
    • /
    • 제42권4호
    • /
    • pp.549-561
    • /
    • 2020
  • We developed a 0.1-㎛ metamorphic high electron mobility transistor and fabricated a W-band monolithic microwave integrated circuit chipset with our in-house technology to verify the performance and usability of the developed technology. The DC characteristics were a drain current density of 747 mA/mm and a maximum transconductance of 1.354 S/mm; the RF characteristics were a cutoff frequency of 210 GHz and a maximum oscillation frequency of 252 GHz. A frequency multiplier was developed to increase the frequency of the input signal. The fabricated multiplier showed high output values (more than 0 dBm) in the 94 GHz-108 GHz band and achieved excellent spurious suppression. A low-noise amplifier (LNA) with a four-stage single-ended architecture using a common-source stage was also developed. This LNA achieved a gain of 20 dB in a band between 83 GHz and 110 GHz and a noise figure lower than 3.8 dB with a frequency of 94 GHz. A W-band image-rejection mixer (IRM) with an external off-chip coupler was also designed. The IRM provided a conversion gain of 13 dB-17 dB for RF frequencies of 80 GHz-110 GHz and image-rejection ratios of 17 dB-19 dB for RF frequencies of 93 GHz-100 GHz.

비선형 위상을 가지는 화염전달함수 (A Flame Transfer Function with Nonlinear Phase)

  • 윤명곤;김진아;김대식
    • 한국추진공학회지
    • /
    • 제20권3호
    • /
    • pp.78-86
    • /
    • 2016
  • 본 논문은 가스터빈시스템에서 외부 유량의 섭동과 이에 따른 열발생의 섭동 사이의 관계를 표현하는 새로운 형태의 화염전달함수(flame transfer function))를 제안한다. 연소의 불안정성을 예측하기 위하여 그 동안 널리 이용되어 왔던 $n-{\tau}$ 모델과 본 논문에서 제안하는 모델과의 가장 큰 차이점은 주파수 변화에 따른 위상의 비선형적인 관계를 표현 할 수 있다는 점에 있다. 기존의 $n-{\tau}$ 모델의 경우 위상은 항상 주파수의 선형함수로 주어지는데 이는 실제 연소시스템의 실험에서 자주 관측되는 결과와 일치하지 않았다. 실험 결과를 바탕으로 새로운 화염전달함수 모델을 구성하였고 연소불안정성의 측면에서 위상의 비선형성이 미치는 영향에 관하여 분석하였다.

Endoplasmic Reticulum Ca2+ Store: Regulation of Ca2+ Release and Reuptake by Intracellular and Extracellular Ca2+ in Pancreatic Acinar Cells

  • Kang, Yun Kyung;Park, Myoung Kyu
    • Molecules and Cells
    • /
    • 제19권2호
    • /
    • pp.268-278
    • /
    • 2005
  • We investigated the effect of cytosolic and extracellular $Ca^{2+}$ on $Ca^{2+}$ signals in pancreatic acinar cells by measuring $Ca^{2+}$ concentration in the cytosol($[Ca^{2+}]_c$) and in the lumen of the ER($[Ca^{2+}]_{Lu}$). To control buffers and dye in the cytosol, a patch-clamp microelectrode was employed. Acetylcholine released $Ca^{2+}$ mainly from the basolateral ER-rich part of the cell. The rate of $Ca^{2+}$ release from the ER was highly sensitive to the buffering of $[Ca^{2+}]_c$ whereas ER $Ca^{2+}$ refilling was enhanced by supplying free $Ca^{2+}$ to the cytosol with $[Ca^{2+}]_c$ clamped at resting levels with a patch pipette containing 10 mM BAPTA and 2 mM $Ca^{2+}$. Elevation of extracellular $Ca^{2+}$ to 10 mM from 1 mM raised resting $[Ca^{2+}]_c$ slightly and often generated $[Ca^{2+}]_c$ oscillations in single or clustered cells. Although pancreatic acinar cells are reported to have extracellular $Ca^{2+}$-sensing receptors linked to phospholipase C that mobilize $Ca^{2+}$ from the ER, exposure of cells to 10 mM $Ca^{2+}$ did not decrease $[Ca^{2+}]_{Lu}$ but rather raised it. From these findings we conclude that 1) ER $Ca^{2+}$ release is strictly regulated by feedback inhibition of $[Ca^{2+}]_c$, 2) ER $Ca^{2+}$ refilling is determined by the rate of $Ca^{2+}$ influx and occurs mainly in the tiny subplasmalemmal spaces, 3) extracellular $Ca^{2+}$-induced $[Ca^{2+}]_c$ oscillations appear to be triggered not by activation of extracellular $Ca^{2+}$-sensing receptors but by the ER sensitised by elevated $[Ca^{2+}]_c$ and $[Ca^{2+}]_{Lu}$.

축대칭 초음속 흡입구의 아임계 불안정성 연구 (A Study on Subcritical Instability of Axisymmetric Supersonic inlet)

  • 신필권;박종호
    • 한국항공우주학회지
    • /
    • 제32권8호
    • /
    • pp.29-36
    • /
    • 2004
  • 초음속 흡입구 buzz는 입구에서의 충격파 패턴의 진동과 내부압력요동을 동반하는 불안정한 아임계 작동으로 정의할 수 있다. 이러한 유동섭동은 연소실 실화나 엔진의 구조직 손상을 일으킬 수 있다. 축대칭, 외부 압축형 흡입구에서 초음속 흡입구의 buzz 현상을 조사하기 위한 실험적 연구가 수행되었다. 자유류 마하수 2.0에서 카울 입구 직경이 30mm인 흡입구 모델이 시험되었다. 아임계 불안정성은 압력섭동의 주파수 및 입구에서의 충격파 구조 분석을 통해 조사되었다. 실험결과 전압럭 회복비는 0.42에서 0.78까지, 포획 면적 비는 0.34에서 0.98까지 변화했다. 아임계 유동의 주파수는 포획 면적비 감소에 따라 증가했으며 주파수는 범위는 $224{\sim}240Hz$였다.

생태계 제어 시설물의 설계 및 배치 최적화(1) -연승식 양식시설의 계류력 특성 및 동요저감에 관한 연구- (Structural and Layout Design Optimization of Ecosystem Control Structures(1) -Characteristics of Mooring Force and Motion Control of the Longline Type Scallop Culturing Facility-)

  • 류청로;김현주
    • 한국수산과학회지
    • /
    • 제28권1호
    • /
    • pp.35-48
    • /
    • 1995
  • To develop the optimal design method for the longline type scallop culturing facilities in the open sea numerical calculations and hydraulic model experiments are carried out for the stability and function optimization. Using the results for the motion and tension of the facilities, stable design concepts and effects of motion control system by vertical anchor and resistance discs art discussed. The results of this study that can be applied to the design are as follows: 1) Total external forces by design wave $(H_{1/3}\;=\;6,7\;m,\;T_{1/3}\;=\;12sec)$ at the coastal waters of Jumunjin for unit facility (one main line) are estimated to 5-20 tons, and required anchor weights are 10-40 tons in the case of 2-point mooring system. Though the present facilities are stable to steady currents, but is unstable to the extreme wave condition of return period of 10 years. 2) The dimensions and depth of array systems must be designed considering the ecological environments as well as the physical characteristics including the mooring and holding forces that are proportional to the length and relative depth of main line to wave length, and the number of buoys and nets. 3) Oscillation of the facility is influenced by water particle motion and the weight of hanging net, and is excited at both edge, especially at the lee side. To reduce the motion of the nets, the vertical anchoring system and the resistence disc method are recommended by the experimental results, 4) The damage of rope near the anchor by abrasion should be prevented using the ring-type connection parts or anchor chains.

  • PDF

A deformable section model for the dynamics of suspension bridges -Part I : Model and linear response

  • Sepe, Vincenzo;Augusti, Giuliano
    • Wind and Structures
    • /
    • 제4권1호
    • /
    • pp.1-18
    • /
    • 2001
  • The classical two-degree-of-freedom (2-d-o-f) "sectional model" is currently used to study the dynamics of suspension bridges. Taking into account the first pair of vertical and torsional modes of the bridge, it describes well global oscillations caused by wind actions on the deck and yields very useful information on the overall behaviour and the aerodynamic and aeroelastic response, but does not consider relative oscillation between main cables and deck. The possibility of taking into account these relative oscillations, that can become significant for very long span bridges, is the main purpose of the 4-d-o-f model, proposed by the Authors in previous papers and fully developed here. Longitudinal deformability of the hangers (assumed linear elastic in tension and unable to react in compression) and external loading on the cables are taken into account: thus not only global oscillations, but also relative oscillations between cables and deck can be described. When the hangers go slack, large nonlinear oscillations are possible; if the hangers remain taut, the oscillations are small and essentially linear. This paper describes the model proposed for small and large oscillations, and investigates in detail the limit condition for linear response under harmonic actions on the cables (e.g., like those that could be generated by vortex shedding). These results are sufficient to state that, with geometric and mechanical parameters in a range corresponding to realistic cases of large span suspension bridges, large relative oscillations between main cables and deck cannot be excluded, and therefore should not be neglected in the design. Forthcoming papers will investigate more general cases of loading and dynamic response of the model.

인체 내부에서의 진동 전달특성 분석 (An Analysis of the Vibration Characteristics through the Human Body)

  • 전종원;진용옥
    • 한국음향학회지
    • /
    • 제19권7호
    • /
    • pp.59-65
    • /
    • 2000
  • 본 논문은 음성진단이나 치료를 위한 기초연구로서, 인체의 진동신호를 측정하여 그 특성을 분석한 것이다. 가진신호는 외부적인 힘이 아닌 자신의 음성이며, 진동과 공진 특성이 강한 모음 '아', '에', '이', '오', '우'를 적용하여 실험하였다. 실험장치로는 마이크로폰과 가속도계 그리고 증폭기를 이용하였으며 컴퓨터에 측정 데이터를 저장하였다. 마이크로폰으로 음성신호를 저장하면서 동시에 가속도계를 이용하여 인체 각 부위에서의 진동신호를 측정하였으며 측정 위치는 머리, 목, 몸체를 일정한 간격으로 나누어 총 63개의 위치로 정하였다. 진동 신호의 측정 위치와 횟수는 사용 목적에 따라 충분히 가변적일 수 있다. 진동 분석을 위한 파라미터는 진동 신호의 크기, 위상, 기본 진동수, 결집음폭대이며, 코히어런스 함수를 이용하여 인체의 진동신호와 음성과의 상관성을 알아보았다. 실험결과, 인체의 위치에 따라 독특한 특징들이 있음을 확인하였으며, 그 결과를 제시하였다.

  • PDF

마하 2.5 초음속 공기흡입구의 버즈 특성에 관한 연구 (Study on the Buzz Characteristics of Supersonic Air Intake at Mach 2.5)

  • 이형진;박태형;최정열;정인석
    • 한국항공우주학회지
    • /
    • 제35권5호
    • /
    • pp.426-437
    • /
    • 2007
  • 초음속 흡입구는 설계점에서 안정된 작동을 보이지만 탈설계점에서는 흔히 버즈라고 불리는 공력 불안정성에 직면하게 되고, 결과적으로 현저한 엔진 성능의 저하를 초래하게 된다. 버즈의 일반적인 특성을 파악하기 위해 1단 꺽임각을 갖는 외부 압축식 축대칭 흡입구를 이용하여 실험적, 수치적 연구를 수행하였다. 본 연구를 통해, 흡입구 목에서 박리에 의한 흡입구 질식이 버즈의 주요 원인임을 밝힘으로써 버즈 현상의 메커니즘을 파악하였다. 여러 면적비율에 따라 간헐적 버즈와 연속적 버즈가 관찰되었고 그 천이과정이 파악되었다. 면적비율이 감소할수록 버즈 주파수가 증가하였으나, 각 면적비율에서 흡입구 내 모든 위치의 압력 진동 주파수는 동일한 특성을 갖는다.

바이오 물질 분석을 위한 금속 나노입자를 이용한 SERS 분석 연구동향 (A Review of SERS for Biomaterials Analysis Using Metal Nanoparticles)

  • 장의순
    • 세라미스트
    • /
    • 제22권3호
    • /
    • pp.281-300
    • /
    • 2019
  • Surface enhanced Raman scattering (SERS) was first discovered in 1974 by an unexpected Raman signal increase from Pyridine adsorbed on rough Ag electrode surfaces by the M. Fleishmann group. M. Moskovits group suggested that this phenomenon could be caused by surface plasmon resonance (SPR), which is a collective oscillation of free electrons at the surface of metal nanostructures by an external light source. After about 40 years, the SERS study has attracted great attention as a biomolecule analysis technology, and more than 2500 new papers and 500 review papers related to SERS topic have been published each year in recently. The advantages of biomaterials analysis using SERS are as follows; ① Molecular level analysis is possible based on unique fingerprint information of biomolecule, ② There is no photo-bleaching effect of the Raman reporters, allowing long-term monitoring of biomaterials compared to fluorescence microscopy, ③ SERS peak bandwidth is approximately 10 to 100 times narrower than fluorescence emission from organic phosphor or quantum dot, resulting in higher analysis accuracy, ④ Single excitation wavelength allows analysis of various biomaterials, ⑤ By utilizing near-infrared (NIR) SERS-activated nanostructures and NIR excitation lasers, auto-fluorescence noise in the visible wavelength range can be avoided from in vivo experiment and light damage in living cells can be minimized compared to visible lasers, ⑥ The weak Raman signal of the water molecule makes it easy to analyze biomaterials in aqueous solutions. For this reason, SERS is attracting attention as a next-generation non-invasive medical diagnostic device as well as substance analysis. In this review, the principles of SERS and various biomaterial analysis principles using SERS analysis will be introduced through recent research papers.