• IE interfaces
• /
• v.17 no.2
• /
• pp.218-225
• /
• 2004

This study aims to investigate effect of external load and motion repetitiveness on perceived discomfort. An experiment was performed for measuring discomfort scores at varying conditions, in which external load, motion repetitiveness and arm posture were employed as experimental variables. The arm posture was controlled by shoulder flexion and abduction, and by elbow flexion. Fifteen healthy college-age students without history of musculoskeletal disorders voluntarily participated in the experiment. The results showed that the effect of external load, motion repetitiveness and shoulder posture on discomfort were statistically significant, but that elbow posture did not significantly affect discomfort ratings. The effect of external load was much larger than that of any other variables, and that of repetitiveness was second only to external load. Discomfort scores significantly increased linearly as the levels of external load and motion repetitiveness increased. This implies that although they were not fully reflected in the existing posture classification scheme such as OWAS, RULA, etc., the effect of external load and motion repetitiveness should be taken into consideration for precisely quantifying work load in industry. Based on regression analysis, equivalent values of external load and motion repetitiveness in terms of discomfort scores were provided, which would be useful for better understanding the degree of their effect on work load.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.4
• /
• pp.46-52
• /
• 2003

For position control of electro-hydraulic servo system, single rod cylinders and double rod cylinders are used. Single rod cylinders have simple structure for manufacturing but different volume ratio of two sides induce to non-linearity in process of then mathematical modeling. So only with conventional PID control method it is difficult to control single rod cylinders precisely. For mole precise position control of single rod cylinders, a controller which is inserted a velocity feedback PID controller and MRAC controller are proposed. With experiment control performances of three control methods are compared. In case of experiment, for external varying load to the system, a hydraulic cylinder and a pressure control valve are used. In conclusion a MRAC is considered a suitable control method for external varying load.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.4
• /
• pp.45-56
• /
• 2004

The purpose of this study is to evaluate perceived discomfort of working postures in terms of upper body (back, shoulder, and elbow) flexions when an external load varies. Eighteen subjects participated in an experiment of appraising perceived discomfort of varying upper body postures with three levels of external loads given. The ANOVA results showed that the perceived discomfort of upper body postures was significantly affected by the external load. It was also apparent that the interactions between external load and upper body posture were significant (p< 0.001). The result implies that a new posture classification scheme for workload assessment methods may be in need to reflect such interactions between external load and upper body posture. In order to support the statement, a regression model of perceived discomfort of upper body postures obtained from the experiment was developed and compared to that of perceived discomfort of seven work-related postures found in automobile assembly operations. The correlation coefficient between predicted and actual values of perceived discomfort was about 0.96. It is expected that the result help to properly estimate the body stress resluting from worker's postures and external loads and can be used as a valuable design guideline on preventing work-related musculoskeletal diseases in industry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.517-521
• /
• 2001

Measurement techniques for the in-duct source characteristics of fluid machines can be classified into direct method and load method, according to whether the technique employs an external acoustic source or not. It has been known that the two methods yield different results and the load method used to come up with a negative source resistance, in spite of the fact that a very accurate prediction of radiated noise can be obtained by using any result. This paper is focused to the effect of time-varying nature of fluid machines on the output result. For this purpose, a simplified fluid machine consisting of a reservoir, a valve and a pipe is considered as representing a typical linear, periodic, time-varying system and the measurement techniques are simulated by utilizing the Hill equation and its steady-state forced response. In the load method, the source impedance turns out being dependent on the valve impedance at the calculation frequency and the valve and load impedances at other frequencies as well.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.2
• /
• pp.9-15
• /
• 2005

The purpose of this study is to quantitatively investigate perceived discomfort of complex shoulder postures with external loads and to propose a preliminary evaluation scheme of shoulder postures. Twelve healthy male adults participated in an experiment to rate their perceived discomfort of shoulder postures. The independent variables were shoulder flexion angle(45, 90 and 150$^{\circ}$), adduction/abduction angle(-30, -10, 0, 30 and 60$^{\circ}$), and external load(0, 1.5 and 3.0kg). The results revealed that the flexion angle, external load and their interaction significantly affected the perceived discomfort(p$<$0.05) but the effect of adduction/abduction angle on the discomfort was not significant(p$>$0.05). The effect of external load was much larger than that of any other factor with explaining about 81% of the total variation of discomfort scores. Based on the experimental results a preliminary scheme was presented to evaluate the stress of shoulder postures with external loads.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.16-22
• /
• 2016

This paper addresses the load usage scheduling in the HEMS for residential power consumers. The HEMS would lead the residential users to change their power usage, so as to minimize the cost in response to external information such as a time-varying electricity price, the outside temperature. However, there may be a consumer's inconvenience in the change of the power usage. In order to improve this, it is required to understand the pattern of load usage according to the external information. Therefore, this paper suggests a methodology to model the load usage pattern, which classifies home appliances according to external information affecting the load usage and models the usage pattern for each appliance based on a copula function representing the correlation between variables. The modeled pattern would be reflected as a constraint condition for an optimal load usage scheduling problem in HEMS. To explain an application of the methodology, a case study is performed on an electrical water heater (EWH) and an optimal load usage scheduling for EHW is performed based on the branch-and-bound method. From the case study, it is shown that the load usage pattern can contribute to an efficient power consumption.

• Structural Engineering and Mechanics
• /
• v.13 no.3
• /
• pp.329-343
• /
• 2002

In this research, the dynamic stability of an orthotropic elastic conical shell, with elasticity moduli and density varying in the thickness direction, subject to a uniform external pressure which is a power function of time, has been studied. After giving the fundamental relations, the dynamic stability and compatibility equations of a nonhomogeneous elastic orthotropic conical shell, subject to a uniform external pressure, have been derived. Applying Galerkin's method, these equations have been transformed to a pair of time dependent differential equations with variable coefficients. These differential equations are solved using the method given by Sachenkov and Baktieva (1978). Thus, general formulas have been obtained for the dynamic and static critical external pressures and the pertinent wave numbers, critical time, critical pressure impulse and dynamic factor. Finally, carrying out some computations, the effects of the nonhomogeneity, the loading speed, the variation of the semi-vertex angle and the power of time in the external pressure expression on the critical parameters have been studied.

• KSBB Journal
• /
• v.29 no.4
• /
• pp.225-231
• /
• 2014

A microbial fuel cell (MFC) and bioelectrochemical systems are novel bioprocesses which employ exoelectrogenic biofilm on electrode as a biocatalyst for electricity generation and various useful chemical production. Previous reports show that electrogenic biofilms of MFCs are time varying systems and dynamically interactive with the electrically conductive media (carbon paper as terminal electron acceptor). It has been reported that maximum power point tracking (MPPT) method can automatically control load by algorithm so that increase power generation and columbic efficiency. In this study, we developed logic based control strategy for external load resistance by using $LabVIEW^{TM}$ which increases the power production with using flat-plate MFCs and MPPT circuit board. The flat-plate MFCs inoculated with anaerobic digester sludge were stabilized with fixed external resistance from $1000{\Omega}$ to $100{\Omega}$. Automatic load control with MPPT started load from $52{\Omega}$ during 120 hours of operation. MPPT control strategy increased approximately 2.7 times of power production and power density (1.95 mW and $13.02mW/m^3$) compared to the initial values before application of MPPT (0.72 mW and $4.79mW/m^3$).

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.247-251
• /
• 2008

In this paper. we analyze electrical characteristics of photovoltaic module according to mechanical load test. Using the equipment for giving load on the surface of module, dark current-voltage is measured. By varying load from 0kg to 206kg, slight different I-V curve is detected. From this, reduced shunt resistance is roughly calculated and micro crack is assumed to be happened. system Through this experiment, periodic external force on PV module might give an negative effect. The detailed analysis is described in the following paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.866-870
• /
• 2001

Measurement techniques for in-duct acoustic source parameters can be classified into the direct method and the load method, according to whether it utilizes an extra external source or not. It is reported that the load methods yield the negative source resistance and the purpose of this paper is to clarify that the time-varying nature of the source is the main cause of this physically implausible result. For this purpose, the direct and load methods for measuring the source characteristics of a simplified fluid machine are simulated using the time domain numerical analysis. In the numerical simulations, the method of characteristics is employed and the source characteristics are calculated from the resultant data. It is shown that the load method results in negative source resistance for some frequencies, whereas the direct method yields positive values for all frequencies considered. It is found that the result of load method is quite sensitive to the change of cylinder pressure or valve profile in contrast to the direct method.