• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.44-46
• /
• 1996

Superconducting cable is using by bundling and twisting with many strands for large current capacity. As a result of the twisting, the magnetic field whose direction is parallel to a sound axis by the transport current of themselves is produced in the cable. Not only the externally exposed longitudinal field but also longitudinal component of self field make a influence on a.c loss and a.c quench current degradation. In this paper, we calculate the saturated region flowing with the critical current density in a strand in case of various twist pitch, transport current and external longitudinal field.

• Language and Information
• /
• v.19 no.2
• /
• pp.1-18
• /
• 2015

This paper retraces the development of Database Semantics (DBS) from its beginnings in Montague grammar. It describes the changes over the course of four decades and explains why they were seen to be necessary. DBS was designed to answer the central theoretical question for building a talking robot: How does the mechanism of natural language communication work? For doing what is requested and reporting what is going on, a talking robot requires not only language but also non-language cognition. The contents of non-language cognition are re-used as the meanings of the language surfaces. Robot-externally, DBS handles the language-based transfer of content by using nothing but modality-dependent unanalyzed external surfaces such as sound shapes or dots on paper, produced in the speak mode and recognized n the hear mode. Robot-internally, DBS reconstructs cognition by integrating linguistic notions like functor-argument and coordination, philosophical notions like concept-, pointer-, and baptism-based reference, and notions of computer science like input-output, interface, data structure, algorithm, database schema, and functional flow.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.331-334
• /
• 2009

This paper presents the characteristics of external inductor for impulse current waveform with 10/350 ${\mu}s$ time parameters. Impulse generator was composed with capacitor having large capacitance and low working voltage for the safe of operator and small discharging sound. Parallel R-L-C circuits with crow-bar gaps and superposition method were proposed to make a high current lightning impulse according to IEC 62305-1. The high energy inductor with several taps for fitting half decay time T2 within the tolerance range and experimental data of inductance according to charging voltages were suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1181-1186
• /
• 2002

This system is controlled by PC application programs through USB interface. PC application programs make image files, user's files , sound files and option files. And these files are downloaded to external memory card of this system. The other PC application programs monitor status of DARC, GPS, LED module of this system. The PC application programs help user manage this system efficiently.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.52-60
• /
• 2002

The purpose of this research is to study the vibration and acoustic pressure radiation from a thin isotropic flat plate stiffened by a rectangular array of beams, and excited by a time harmonic point force. These constructions on aircraft and ship structures are often subjected to fiequency dependent pressure fluctuations and forces. Forces from the these excitations induce structural vibrations in a wide range of fiequencies, which may cause such things as acoustic fatigue and internal cabin noise in the aircraft. It is thus important that the response characteristics and vibration modes of such periodic structures be horn. From this theoretical model, the sound pressure levels(SPL) in a semi-infinite fluid(water) bounded by the plate with the variation in the locations of an external time harmonic point farce on the plate can be calculated efficiently using three numerical tools such as the Gauss-jordan method the LU decomposition method md the IMSL numerical package.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.785-790
• /
• 2000

The resonant frequency of a gas-filled cylindrical Helmholtz resonator in a liquid is obtained analytically. The equation of motion of the resonator is derived by using the condition of equilibrium of forces acting on the mass in the neck of the resonator. The reaction force on the upper side of the cylinder due to the acceleration of external fluid and sound radiation is obtained by using the analytical results for the baffled circular-piston problem. From the frequency response function of the resonator, a formula to predict the resonant frequency of the resonator is derived. It is shown that the resonant frequency of the Helmholtz resonator significantly decreases due to the cushioning effect of gas inside the cavity. Therefore, when a pressure transducer is to be installed in a pin-hole type mounting method, much care should be paid to remove the gas from the cavity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.596-600
• /
• 2009

We are developing a simple low-cost wind velocity sensor based on small microphones. The sensor system consists of 4 microphones covered with specially shaped wind screens, 4 pre-amplifiers that respond to low frequency, and a commercial sound interface with multi channel inputs. In this paper, we first present the principle of the sensor, i.e., technique to successfully suppress the influence of external noise existing in the environment in order to determine the wind velocity and the wind direction from the output from a microphone. Then, we present an application for generating realistic motions of a virtual tree swaying in real wind. Although the current sensor outputs significant leaps in a measured sequence of directions, the interactive animations demonstrate that it is usable for such applications, if we could reduce the leaps to some degree.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.4
• /
• pp.224-230
• /
• 2001

EBM is "the conscientious, explicit and judicious use of current best evidence in mating decisions about the care of the individual patient. It means integrating individual clinical expertise with the best available external clinical evidence from systematic research." EBM is the integration of clinical expertise, patient values, and the best evidence into the decision making process for patient care. The practice of EBM is usually triggered by patient encounters which generate questions about the effects of therapy, the utility of diagnostic tests, the prognosis of diseases, or the etiology of disorders. The best evidence is usually found in clinically relevant research that has been conducted using sound methodology. Evidence-based medicine requires new skills of the clinician, including efficient literature-searching, and the application of formal rules of evidence in evaluating the clinical literature. Evidence-based medicine converts the abstract exercise of reading and appraising the literature into the pragmatic process of using the literature to benefit individual patients while simultaneously expanding the clinician's knowledge base. This review will briefly discuss about concepts of evidence medicine and method of critical appraisal of literatures.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.185-191
• /
• 1999

This paper deals with a method to predict the noise level inside metro electric cars running a single-line tunnel at the speed of 80km per hour using ray tracing method, a kind of ray acoustics generally used for a high-frequency and air-born noise analysis. The interior of the car including a under-frame, seats, side doors, end doors, door-pockets, side panels, end panel, a roof panel and so on is modeled. And in order to describe the noise power coming inside, artificial noise sources are designated using sound transmission loss data of each section measured from simple tests and external noise level. The noise level inside the car is calculated and its properties are investigated. The results satisfy the criteria on noise level inside the car.

• Transactions of Materials Processing
• /
• v.11 no.8
• /
• pp.710-715
• /
• 2002

This paper describes the numerical determination of optimum blank diameter for sound material flow and high precise thread profile of a spindle screw through external thread rolling using two-three roll dies. Initial blank diameter affects the dimensional accuracy and surface finish qualities of a spindle screw in thread rolling process, therefore it is very important to determine the optimum blank diameter in thread rolling process. In order to determine the optimum blank diameter, this paper suggests the calculation method of initial bland diameter considering the real shape of tooth. The finite element code DEFORM is applied to analyze the metal flow of tooth, and these analytical results are verified by thread rolling experiment for spindle screw.