• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.134-136
• /
• 2003

In this work, we have seen the effect of hole-transporting layer in organic light-emitting diodes using N,N'-biphenyl-N,N'-bis-(3-methylphenyl)-[1,1'-biphenyl]-4,4'-diamine(TPD) and N,N'-biphenyl-N,N'-bis-(1-naphenyl)-[l,l'-biphenyl]-4,4'-diamine(NPB). NPB is regarded as a better hole trans porting material than TPD, since it has a higher glass transition temperature($T_g$). And current-voltage, luminance-voltage and external quantum efficiency of device were measured with the thickness variation of buffer layer using copper phathalocyanine(CuPc) am polytetrafluoroethylene (PTEE) at room temperature. We have obtained an improvement of External quantum efficiency when the CuPc 30[nm] and PTFE 1.0[nm] is used.

• 한국컴퓨터산업교육학회:학술대회논문집
• /
• 한국컴퓨터산업교육학회 2003년도 제4회 종합학술대회 논문집
• /
• pp.49-54
• /
• 2003

In this work, we have seen the effect of hole-transporting layer in organic light-emitting diodes using N,N'-biphenyl-N,N'-bis-(3-methylphenyl)-[1,1'-biphenyl]-4,4'-diamine(TPD) and N,N'-biphenyl-N,N'-bis-(1-naphenyl)-[1,1'-biphenyl]-4,4'-diamine(NPB). NPB is regarded as a better hole trans porting material than TPD, since it has a higher glass transition temperature$(T_g)$. And current -voltage, luminance-voltage and external quantum efficiency of device were measured with the thickness variation of buffer layer using copper phathalocyanine(CuPc) and polytetrafluoroethylene (PTFE) at room temperature. We have obtained an improvement of External quantum efficiency when the CuPc 30[nm] and PTFE 1.0[nm] is used.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of $218nW/cm^{2}$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of 218 nW/$\textrm{cm}^2$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1491-1492
• /
• 2011

In this study, we investigated about the effect of hole transport layer materials(${\alpha}$-NPD, TPD) depending on the electrical properties of organic light emitting diode. In deposition method, we used thermal evaporation and it was a method for performing thin film by attaching vaporizing a molecule to substrate in a high thermal and vaccum. We analyzed luminance, current density, external quantum efficiency and current efficiency in 40 [nm] as optimization thickness of ${\alpha}$-NPD and TPD. In result of experiment, maximum luminance of TPD had 1.1 times higher than ${\alpha}$-NPD, but ${\alpha}$-NPD had luminance, external quantum efficiency, and current efficiency higher than TPD in low operating voltage. Actually, ${\alpha}$-NPD had efficiency higher than TPD in low operating voltage.

• Transactions on Electrical and Electronic Materials
• /
• 제9권3호
• /
• pp.105-109
• /
• 2008

Electrical characteristics of organic light-emitting diodes were investigated by varying a hole-size in evaporation boat in the device structure of ITO/tris(8-hydroxyquinoline) aluminum$(Alq_3)$/Al. The device was manufactured using a thermal evaporation under a base pressure of $5{\times}10^{-6}$ Torr. The $Alq_3$ emitting organics were evaporated to be a thickness of 100 nm at a deposition rate of $1.5{\AA}/s$. A cylindrical-shaped evaporation boat was made out of stainless steel with a small size of hole on top of the boat. Several evaporation boats were made having a different hole size on top; 0.8 mm, 1.0 mm, 1.5 mm, and 3.0 mm. We found that when the hole size on top of the evaporation boat is 1.0 mm, the average roughness is rather smoother compared to the other ones. Also, luminance and external quantum efficiency are superior to the others. Compared to the ones from the devices made with the hole-size of 0.8 mm boat. The luminance and external quantum efficiency of the device made with the hole-size of 1.0 mm boat were improved by a factor of seventy and thirty three, respectively. Also operating voltage is reduced to 2 V.

• 폴리머
• /
• 제29권5호
• /
• pp.486-492
• /
• 2005

적색을 낼 수 있는 물질을 만들기 위해 비공액 주사슬로 되어 있는 고분자의 곁사슬에 스티렌 분자가 연결되어 있는 트리페닐아민, 반응성 있는 작용기를 가진 아미노벤즈알데히드 그룹, 및 PM(4-(dicyanomethylene)-2-(tertbutyl)4H-pyran) 그룹을 도입하였다. 이 고분자의 전자 흡수 스펙트럼은 용액과 필름 상태에서 비슷하였다. 모든 고분자는 전기화학적으로 활성을 보였으며, 전기 발광 소자를 작동하였을 때 700nm 근처에서 적색을 보였다. $ITO/PPV/P5-PM/BCP/Alq_3/Al$으로 구성된 소자는 $50mA/cm^2$의 낮은 전류 밀도에서 $120cd/m^2$의 밝기를 보였으며, 외부 양자 효율은 $0.67\%$를 나타내었다. 발광 고분자 층에서의 균형있는 전하의 재결합을 유도하여 소자의 발광 효율을 높일 수 있었다. 이중 기능성(bifunctionalized)을 도입함으로써 적색 발광을 내면서 효율이 높은 발광 고분자를 개발하였다.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1566-1570
• /
• 2013

In this paper, we analyzed the electric characteristics of the OLEDs device of which anode ITO has been treated with the oxygen plasma. We fabricated the basic three-layer structure (ITO / AF / $Alq_3$ / $Cs_2CO_3$ / Al) device, analyzed how the oxygen plasma treatments of the ITO surface affects to the electrical characteristics of OLEDs. We also produced a four-layer structure device (ITO / AF / TPD / $Alq_3$ / $Cs_2CO_3$ / Al) with the oxygen plasma treatment. From the comparative analysis to the devices, we confirmed following results. The three-layer structure OLEDs device with oxygen plasma treatment has better characteristics than the device without the treatments; maximum luminance, luminous efficiency, and external quantum efficiency are improved approximately 151 [%], 126 [%], and 175[%], respectively. Also, the electric characteristics of the four-layer structure device with oxygen plasma treatment are improved comparing to the characteristics of the three-layer structure device with oxygen plasma treatment; maximum luminance, luminous efficiency, and external quantum efficiency are improved approximately 144 [%], 115 [%], and 124[%], respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.984-987
• /
• 2003

The electrophosphorescent emission properties were investigated in polymer light-emitting diodes (PLEDs) based on a poly(9-vinylcarbazole) (PVK) doped with a green phosphorescent dye of fac-tris(2-phenylpyridine) iridium (III) [$Ir(ppy)_3$]. A green light peaked at 516 nm was emitted from devices with a configuration of ITO/PEDOT:PSS/PVK:$Ir(ppy)_{3}$/BCP/$Alq_{3}$/LiF/Al. The optimal doping concentration of $Ir(ppy)_{3}$ in PVK was found at 2% by weight, under which maximum current efficiency of 24.3 cd/A and peak external quantum efficiency of 6.8% were achieved at the high luminance of 4240 $cd/m^{2}$. The external quantum efficiency of 5% and current efficiency of 18 cd/A can be sustained even at the very high luminance of 35000 $cd/m^{2}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1003-1006
• /
• 2003

We have investigated the effect of hole-injection buffer layer and cathodes in organic light-emitting diodes u sing poly (3,4-ethylenedioxythiophene) : poly (stylenesulfonate) (PEDOT: PSS) in a device structure of $ITO/PEDOT:PSS/TPD/Alq_3/Cathode$. Polymer PEDOT:PSS buffer layer was made using spin casting method. Current-voltage, luminance-voltage characteristics and efficiency of device were measured at room temperature with a variation of cathode materials. The device with LiF/Al cathode shows an improvement of external quantum efficiency approximately by a factor of ten compared to that of Al cathode only device. Our observation shows that the energy barrier-height in cathode side is important in improving the efficiency of the organic light-emitting diodes.