• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.81-86
• /
• 2001

The functions of food packaging are not only prevention from physical damage and loss during carrying and transportation, but also extension of shelf-life by adding antimicrobial substrate in packaging materials. Consumption of active packaging is gradually increasing. With different dosage of potassium sorbate(P.S.), the food preservative agent, antimicrobial papers were made by internal and external application of starch. The antimicrobial action of the paper was analyzed by the halo test and the shake flask method. The mechanical properties and strength were also measured. Antimicrobial papers adding P.S. showed higher values in tensile index than adding starch. The antimicrobial paper using starch showed similar microbe decreasing rate as that using P.S. Though microbe decreasing rate was 21.9%, it showed possibility to make antimicrobial paper using food preservative.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.428-433
• /
• 2011

In this paper, a prediction method for dynamic stability derivatives is studied using steady state simulations in rotational coordinates. The simulations require the extension of a standard CFD formulations based on inertial coordinate. A new CFD code based on the method are developed. Flows induced by steady circular motions of airfoils with a constant pitch rate are simulated with the code. From the numerical simulations, the pitch rate derivatives are obtained at various Mach numbers, and the results are compared with other numerical results. The numerical simulations show that the new code are capable of predicting dynamic stability derivatives.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.1
• /
• pp.56-62
• /
• 2005

In this study, A controlled auto-ignition (CAI) single cylinder gasoline engine is considered, focusing on the extension of operating conditions. The fuel is injected indirectly into electrically heated inlet air flow. Investigated are the engine performance characteristics under the wide range of operating conditions such as 32 to 63 in the air-fuel ratio, 1000 to 1800 rpm in the engine speed, and 150 to $180^{\circ}C$ in the inlet-air temperature. A controlled auto-ignition gasoline engine which has the super ultra lean-burn with self-ignition of gasoline fuel can be achieved by heating inlet air.

• 한국해양학회지
• /
• v.28 no.2
• /
• pp.121-131
• /
• 1993

The tidal front forming in the Mid-Yellow Sea off Korea, near Tae-An peninsular, is calculated using a 3-D general circulation model(Semtner, 1974) and the concept of mixing rate, an extension of the concept of mixing efficiency proposed by simpson & Hunter(1974). Along the north and south open boundaries, simple radiation conditions are applied. The model is run with the initial state which represents the winter condition. With imposed uniform heating by solar radiation and spatially-different vertical mixing, the model then generated the tidal front comparable to the observed one.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09b
• /
• pp.131-137
• /
• 2010

`Frost heave' is volumetric extension behavior of soil due to freezing. It could have a bad effect to foundations of infrastructures like building, road, railroad and bridge. Therefore, it is considered as a primary design parameter with 'adfreeze bond' and 'creep deformation' for foundation design in cold region. In some countries, studies for analyzing frost heave in many ways have being performed, however, only a few studies for evaluating frost susceptibility of soils by measuring frost heave rate of frozen soils in Korea. For analyzing frost heave as a foundation design parameter, both frost heaving rate and heaving pressure are should be addressed in study. Hence, in this study, development of experimental apparatus to evaluate frost heave and pressure is suggested.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.19-26
• /
• 1993

The p-version crack model based on integrals of Legendre polynomial and virtual crack extension method is proposed with its potential for application to stress intensity factor computations in linear elastic fracture mechanics. The main advantage of this model is that the data preparation effort is minimal because only a small number of elements are used and the high accuracy and the rapid rate of convergence can be achieved in the vicinity of crack tip. There are two important findings from this study. Firstly, the limit value, the strain energy of the exact solution can be estimated with successive three p-version approximations by ascertaining the approximations is entered the asymptotic range. Secondly, the rate of convergence of p-version model is almost twice that of h-version model on the basis of uniform or quasiuniform mesh refinement for the cracked panel problem subjected tension.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.1
• /
• pp.18-23
• /
• 1997

The study was carried out to clarify reasonable production of healthy seedling, optimal Pot depth, and appropriate transplanting time, which can be deduced from understanding of seedling quality. Seedling quality results from growth of root and shoot, morphology and distribution of root system under influence of Pot depth during seedling growing period. Stem height, shoot dry weight, leaf area and leaf number were increased in proportion to depth of pots. Growth of shoot and root during seedling growing period showed the most dramatic development between 20th and 25th day after temporary planting. Root number increased as pot depth decrease and total root length and dry weight increased as pot depth increase. In 5cm pot, relative multiplication rate was higher and mean extension rate was lower than other depth of Pot. The limitation of pot volume in which rhizosphere was located enhance the development of roots of second and third order. At 20th days after temporary Planting root distribution was relatively uniform in length and development of adventitious root on stem base was poor as Pot depth decreased.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2009

Recently, the relay communication is focused for the power saving and coverage extension of ad-hoc networks. For the high date rate transmission, it is proposed to adapt OFDMA relays. In this paper, we assume the 2 hop cooperative OFDMA relays between the source and the destination. The performance of 3 different relaying methods are derived and compared. We noticed that the selective OFDMA relaying method has the best performance followed by opportunistic OFDMA relaying and repetition-based OFDMA relaying method under the same threshold mutual information rate.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.76-84
• /
• 1993

In this thesis, general method using autoregressive model in the functional separation of the myoelectric signal of human arm movements are suggested. Covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe six arm movement patterns` the forearm flexion and extension, the wrist pronation and supination, rotation-in and rotation out. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squares error. With the error signals of autoregressive(AR) model, the result showed that the highest success, rate was abtained in the case of 4th order, and success rate was decreased with increase of order. This technique might be applied to biomedical-and rehabilitation-engi-neering.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.4
• /
• pp.131-139
• /
• 2002

The proportion of the aged people in Korea has increased rapidly by more than 7% in 2000. A survey says that the changing rate from the aging society to the aged is the highest among the OECD countries. The prevalence rate of the aged population is on the increase. Chronic diseases such as arthritis and strokes limits their body's functions and activities of daily living. It is necessary that functional training. ADL training and continuous treatment be provided by Physical or Occupational Therapists. Discontinuance of treatment can cause the aged people to be in a bed state. The aged people need a variety of home care services at their convenience. Occupational and Physical therapist should play a major role in providing the rehabilitation-base home care services. Further they are expected to contribute to the extension of health care services such as home care and nursing home programs.