• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.235-244
• /
• 1993

The present study was made based on the zero extension line theory and the well-known Mononobe-Okabe's to determine the dynamic earth pressures acting on the retaining walls. The zero extension line theory, which was proposed by Roscoe et al., assumes the coincidence between the loci of failure and the zero extension lines in soil mass. ln order to compute the dynamic earth pressure developed by an earthquake, it was assumed that for the vertical retaining walls with no surcharge, the backfill materials are dense and cohesionless sandy soils, there are no changes in soil parameters during earthquake, and the horizontal earthquake intensity is considered. The effects of horizontal earthquake intensity, internal friction angle of soil, wall friction angle and dilation angle, on the earth pressure coefficients were analysed. Final1y, the presented theories were successfully compared with the Mononobe-Okabe's as well.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.587-590
• /
• 2009

New onion hybrid cultivar, "Yeongpunghwang" was developed from cross between "MOS8", male sterile line and "Mokpo 11", pollen line by Mokpo Sub-Station, National Institute of Horticultural & Herbal Science, RDA in 2008. The crossing line was performed yield test in 2003. IT was evaluated as "Mokpo 11" in the regional yield trial test(RYT) from 2006 to 2008 during three years. This line is semi-erect plant growth type and has green leaf colour. It has broad ovate bulb shape and yellow skin colour in bulb characteristics. Plant height, leaf number, and bolting rate was 78cm, 7.9, and 3.9%, respectively. Lodging date as harvesting indicator was on 26 May. The yield potential of "Yeongpunghwang" was out-yielding 6% compare to check variety ("Sunpower") by with 8,344 kg/10a in RYT. It showed moderated cold hardness in all regional location which was conducting RYT, including Muan, Goheung, Changyeong and Andong. So this variety was recommend as a leading variety at southern area of korea.

• Journal of the Korean Home Economics Association
• /
• v.18 no.4
• /
• pp.31-39
• /
• 1980

The basic pattern of skirt should be functional in addition to be fit the body. The author paid special attention to the expansion and contraction of the shell which were made the lower trunk and thigh caused by sitting motions. The replicas of the shell were taken by using a gypsum method on 1 female under 4 standardized motions; standing motion, (basic motion), sitting on the chair with flextion 90' at the hip and the knee joints sitting with dropping knees, and sitting with benting legs side wards. Those replicas obtained were developed to the patterns and changes in shape and area of those were measured. Typical displacement and transformation of the shell surface patterns were showed geographycally fig 5-1 to 5-4. mean values of expansion and constriction were obtained by measuring the shell surface on 60 female under the 4 motions. the mean values of it were showed numerically in Table 1-1 to 1-3. The following results were obtained; 1. Vertical constriction of front of the shell were observed near sulcus in guinalis, and vertical extension were near the knees. Horizontal extension were observed near the thighs and the knees. 2. Vertical constrictions of the back of the shell were observed near the knees. It seemed to be influnced the flexion angles of knee points. vertical extension were near gluteus and thighs. Horizontal constriction were small, and horizonlal extension were near gluteus. 3. The high rates of constriction and extension were found near sulcus in guinalis, glutes, and knees. 4. The rates of constriction and extension on the waist line were very low. 5. The highest values of constriction and extension were found in hip and knees.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1407-1415
• /
• 2008

Recently, there has been growing interest in Gyongin Line demand estimation, because SMRT(Seoul Metropolitan Rapid Transit Corporation) Line 7 will be extended west by 9.8km from Onsu to meet the Gyongin Line at Bupyeong-gu Office. This study was designed to estimate the change of traffic demand in Gyongin Line before and after the completion year 2011, also provide against the economic loss caused by the derived demand from Gyongin Line to SMRT Line 7. In this paper we give preliminary results for the strategic plans for traffic demand estimation and train operating plan in Gyongin Line by analyzing transport performance of Seoul metropolitan subway, and an additional study on the transportation market and the urban development plan is needed for more accurate results.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.70-77
• /
• 2017

Bandwidth extension is a technique to improve speech quality, intelligibility and naturalness, extending from the 300 ~ 3,400 Hz narrowband speech to the 50 ~ 7,000 Hz wideband speech. In this paper, an Artificial Bandwidth Extension (ABE) module embedded in the Opus audio decoder is designed using the information of narrowband speech to reduce the computational complexity of LPC (Linear Prediction Coding) and LSF (Line Spectral Frequencies) analysis and the algorithm delay of the ABE module. We proposed a spectral envelope extension method using DBN (Deep Belief Network), one of deep learning techniques, and the proposed scheme produces better extended spectrum than the traditional codebook mapping method.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.11a
• /
• pp.115-121
• /
• 2002

The growth of semiconductor industry attracted to researchers like design, facility technique and making small size chip areas. But nowadays, cause of technology extension and oversupply and price down, yield improvement is the most important point on growth. This paper describes the computer mode]ing technique as the solutions to analyze the problem, to formalize the semiconductor manufacturing process and to build advanced manufacturing environments. The computer models are built referring an existing 8' wafer production line in Korea.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.339-342
• /
• 2008

In this paper, the lessons and learns are introduced from the result of the trial project which is the first CBTC(Communication Based Train Control System) at Korail Bundang Line. This project has started end of 2002 and finished recently by Samsung SDS. The main purpose of this project was that new technology was seek for next generation of railway signal control system adapted in Korea. In 2002, there was no any revenue service system using Radio Frequency CBTC in the world at that time. Just a few trial project was on going in USA and EU. In well developed cities, the metro system have been built and old enough therefore they have to be considering re-signalling their existing system with advanced system for increasing availabilities of line usage and safety. This Bundang Line Trial Project was the first Korean CBTC project for above reasons. Most sub systems have been developed using local technology such as Electronics Controlled Interlocking System and Track Circuit Systems etc. Specially, in this project the RF-Communication devices are developed by local technology using DSSS(Direct Sequency Spread Spectrum) instead of FHSS(Frequency Hopping Spread Spectrum). This project has lasted for more than five years originally planned for three years because it was only accessible only night time in the main line from Ori to Suseo about 20km long. Each night only 2 and half hours are available to use the main line. Now the trial project has been done successfully with meet the customer's requirement, therefore the upgrade the mainline of Bundang line and another extension area up to Wangsipli to make revenue service using this new technology. This paper shows this result of the trial project and the strategy of upgrade and extension project as well.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.858-867
• /
• 2018

Analytical modeling equations are proposed for the conventional and modified three-section branch-line couplers. The analytical equations are explicit and capable of determining the characteristic impedance of each branch line for the coupler at desired coupling level as well as the suitability of broadband S-parameters analysis. In addition, a bandwidth extension and miniaturization of three-section branch-line coupler using slow-wave and meandering line structures were designed. The modified coupler, which is able to operate within frequencies from 1.5 to 3.32 GHz has been fabricated, tested and compared. A bandwidth extension of 600 MHz and 53% reduced size of the modified coupler have been achieved compared to a conventional coupler. The modified coupler has roughly insertion loss and coupling of -4 dB and -3.2 dB, while the isolation and return loss, respectively less than -14 dB with fractional bandwidth of 77 %, as well as phase imbalances less than $2^{\circ}$ over the operating bandwidth. Overall, the derived analytical model, simulation and measurement results demonstrated a good agreement.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.131-140
• /
• 2013

Power shoulder look is most noticeable trend in women's wear in the 09/10 season. Specially jackets with sharper angle and wider shoulder became the best item since then, and were chosen for must-have item by fashion directors. Jacket occupied 50% in power shoulder items. Its shoulder angle was from 0 to 30 degree but items with 15 degree stood out among them. There are three methods to make power shoulder look jackets; shoulder extension method with moving shoulder tip up and sleeve cap height, method of extension and cutting sleeve cap with shorten shoulder length, and method of extension and moving shoulder tip up in the sleeve with shoulder line like raglan sleeve. As a result, shoulder angle is higher, starting point of shoulder line is closer to side neck point and shoulder point is extender to outside for appearance and fit. In shoulder extension method, the arm hole line was drawn with care by matching joining shoulder seam and setting the sleeve into the arm hole. In sleeve cap transformation, it is desired that starting point shoulder angle is moved closely to side neck point. In case of the sleeve with shoulder line, it needs to consider enough ease of shoulder and upper arm. For making patterns of power shoulder look jacket, it need to consider arm hole line, shoulder length, shoulder point position, sleeve cap height and sleeve width with interpretation design facts. In this study, through the analysis clothing construction method of power shoulder jacket, it is of help to pattern making for various power shoulder design items.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.431-433
• /
• 2018

This paper proposes the system that offer super-wideband speech which is made by artificial bandwidth extension technique using wideband speech signal in time-domain. wideband excitation signal and line spectrum pair(LSP) are extracted based on source-filter model in time-domain. Two parameters are extended by each bandwidth extension algorithms, and then, super-wideband speech parameters are estimated. and synthesized. Subjective test shows super-wideband speech is better speech quality than wideband speech signal.