• Journal of Korean Foot and Ankle Society
• /
• v.17 no.2
• /
• pp.79-83
• /
• 2013

Calcaneus is largest tarsal bone and the fracture of calcaneus is most common tarsal fractures. Calcaneal fractures are divided into extra-articular and intra-articular fractures. Intra-articular calcaneal fractures could be classified as tongue type and joint depression type using simple lateral radiograph (Essex-Lopresti classification), but Sanders suggested new classification according to involving the posterior facet of calcaneus using computed tomography. The involvement of posterior facet was revealed as more complicated than Essex-Lopresti classification. The principle purpose of treatment of calcaneal fractures are restoration of calcaneal height (B$\ddot{o}$hler angle), width, axis, anatomical reduction of joint and restoration of function through the stable fixation. Good visualization of joint and anatomical reduction could be achieved by extended lateral approach. But, skin problem could be occurred after of extended lateral approach.

• Journal of Trauma and Injury
• /
• v.18 no.1
• /
• pp.64-69
• /
• 2005

Purpose: We report the radiologic and the clinical results for surgical treatment of calcaneal fractures involving the subtalar joint. Methods: We evaluated the findings of radiographs and computed tomographs of 39 patients (40 cases) with intra-articular calcaneal fractures. The fractures were treated with open reduction via an extended lateral approach and internal fixation using a plate. We assessed the radiologic results, such as the $B{\ddot{o}}hler$ angle, the Gissane angle, and the height/width ratio. We assessed the clinical results based on the critieria of Salama et al. Results: According to the Essex-Lopresti classification, 9 cases were classified as tongue type and 31 cases as joint depression type. According to the Sanders classification, 10 cases were classified as type IIA, 4 cases as IIB, 16 cases as IIIAB, 4 cases as IIIAC, and 6 cases as type IV. The mean preoperative $B{\ddot{o}}hler$ angle was 7.7, the mean postoperative $B{\ddot{o}}hler$ angle was 21.1, and the mean last follow-up $B{\ddot{o}}hler$ angle was 16.8. Clinical results classified as 10 excellent, 13 good, 11 fair, and 6 poor. Conclusion: In the treatment of intra-articular fractures of the calcaneus, open reduction via an extended lateral approach seems to be a useful method in that it can provide direct exposure of the subtalar joint with little morbidity.

• Archives of Reconstructive Microsurgery
• /
• v.5 no.1
• /
• pp.62-69
• /
• 1996

Lateral arm flap has been used for the reconstruction of the various defects in hand, head and neck region. This flap is highly dependable as a free flap because of its thin flap thickness, constant vascular anatomy and possibility of osteocutaneous flap and fascial flap. Recently, many authors tried extended approach for vascular pedicle and distal flap extension for bigger defects. In this study, we review previous articles and 14 cases used lateral arm flaps for coverage of the varying defect on head and neck, upper and lower extremities succesfully. In conclusion, lateral arm flap has constant anatomical structure and can overcome the disadvantages such as short pedicle length and limited flap size, then the range of its application can be very widened.

• Archives of Plastic Surgery
• /
• v.45 no.4
• /
• pp.325-332
• /
• 2018

Background Zygomaticomaxillary complex (ZMC) fractures mostly occur in the form of tripod fractures. The surgical field is accessed using a combination of three classic approaches. However, the subciliary incision may have unfavorable aesthetic results. Herein, the authors report the advantages of the extended transconjunctival approach (ETA) combined with T-bar screw reduction in minimizing scarring and complications for the treatment of ZMC fractures. Methods A total of 26 patients underwent ZMC reduction through the ETA and intraoral approach. A skin incision measuring roughly 5 to 8 mm in length was placed following the lateral canthal skin crease. After releasing the inferior crus of the lateral canthal tendon for canthotomy, the medial periosteum of the lateral orbital rim was preserved for canthal reattachment. A limited subperiosteal dissection and partial relaxing incision of the orbicularis oculi were performed to expose the fracture line of the inferior orbital rim and zygomaticofrontal suture. Reduction was performed using a T-bar screw through the transconjunctival incision and an elevator through the intraoral incision. Results The aesthetic and functional results were excellent. Successful reduction was achieved and the skin incision was less than 8 mm in 20 cases (76.9%). Only six patients had an additional skin incision (less than 5 mm) to achieve reduction. No cases of ectropion, entropion, or excessive scarring were noted. Conclusions The ETA using a T-bar screw is a useful method for maximizing aesthetic results in ZMC fractures, with the advantages of minimal scarring, faster recovery, and maintenance of pretarsal fullness.

• The Journal of the Korean dental association
• /
• v.56 no.3
• /
• pp.142-150
• /
• 2018

In the posterior maxillary area, due to resorption of the ridge after extraction and pneumatization of the maxillary sinus, the height of the alveolar ridge may not be sufficient for placement of implants. To solve this problem, sinus augmentation using both crestal and lateral approaches have been widely used. Jung et al. (2010) introduced the modified lateral approach technique, which is a simplified technique that combines the advantages of crestal and lateral approaches. The purpose of this case report is to report two cases in the posterior maxilla in which simultaneous implant placement with maxillary sinus augmentation has been performed using the modified lateral approach technique. In two female patients, 67 and 74 years old, respectively, simultaneous implant placement was performed using the modified lateral approach technique on the left maxillary second premolar and the first molar. In both patients, the residual bone height on the distal side of the maxillary second premolar was measured to be approximately 5 mm, and the residual bone height of the first molar was measured to be 2-3 mm. After flap elevation, osteotomy of the lateral window was performed in the form of a mesiodistally extended slot above the sinus floor and the Schneiderian membrane was elevated. Sequenced drilling was performed while protecting the membrane with a periosteal elevator. Bone graft and implant placement was performed after preparation of the implant site. Sufficient primary stability was achieved for each implant and sinus membrane was not perforated. After four and five months respectively, implant second surgery was performed. Clinically, the implants were observed to be stable. Implants and surrounding peri-implant mucosa were well maintained after prosthodontic treatment. In conclusion, the modified lateral approach could be a predictable and efficient technique for implant placement in the atrophied posterior maxilla.

• Journal of Chest Surgery
• /
• v.46 no.3
• /
• pp.216-219
• /
• 2013

There are various methods for approaching the aortic arch, such as median sternotomy or lateral thoracotomy. However, accessing the site of distal anastomosis is problematic when the distal arch is extensively involved. We report a case of extended aortic arch replacement and coronary artery bypass through the L-incision approach.

• Anatomy and Cell Biology
• /
• v.56 no.1
• /
• pp.39-45
• /
• 2023

Fixation of radial head fracture with minimally invasive posterior approach remains a significant challenge. The aim of this study was to determine the feasibility of trans-anconeus posterior elbow approach and to observe lateral ulnar collateral ligament (LUCL) in extended elbows. This cadaveric study was performed in twenty upper limbs of fresh fixed adult male cadavers. An oblique incision was made in the middle segment of anconeus until the lateral ligament complex and the joint capsule had been revealed. A deep dissection was explored to observe the anatomical relationship of the LUCL to the anconeus. Measurements of the LUCL were recorded while the elbow was fully extended. The mean distance between the edge of the radial head and the proximal insertion of the LUCL was 13.3 mm (11.5-16.2 mm); the mean distance between the edge of the radial head and the distal insertion of the LUCL was 20.9 mm (19.2-23.4 mm); the distance between the edge of the radial head and the distal edge of the annular ligament was 11.2 mm (8.22-11.7 mm). By estimate correlation of the previous measurements, the direct and accessible way to expose the posterolateral articular capsule of the elbow joint was through a window in medial 2/3 of the middle segment of anconeus muscle. These trans-anconeus approach is useful. It provides good visualization, facilitates applying the implants, and lessens the risk of radial nerve injury. Awareness of the anatomy is mandatory to avoid injury of LUCL.

• Archives of Plastic Surgery
• /
• v.42 no.5
• /
• pp.580-587
• /
• 2015

Background Descent of the lateral aspect of the brow is one of the earliest signs of aging. The purpose of this study was to describe an open surgical technique for lateral brow lifts, with the goal of achieving reliable, predictable, and long-lasting results. Methods An incision was made behind and parallel to the temporal hairline, and then extended deeper through the temporoparietal fascia to the level of the deep temporal fascia. Dissection was continued anteriorly on the surface of the deep temporal fascia and subperiosteally beyond the temporal crest, to the level of the superolateral orbital rim. Fixation of the lateral brow and tightening of the orbicularis oculi muscle was achieved with the placement of sutures that secured the tissue directly to the galea aponeurotica on the lateral aspect of the incision. An additional fixation was made between the temporoparietal fascia and the deep temporal fascia, as well as between the temporoparietal fascia and the galea aponeurotica. The excess skin in the temporal area was excised and the incision was closed. Results A total of 519 patients were included in the study. Satisfactory lateral brow elevation was obtained in most of the patients (94.41%). The following complications were observed: total relapse (n=8), partial relapse (n=21), neurapraxia of the frontal branch of the facial nerve (n=5), and limited alopecia in the temporal incision (n=9). Conclusions We consider this approach to be a safe and effective procedure, with long-lasting results.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.9
• /
• pp.1079-1085
• /
• 2001

Objective : We analysed various surgical approaches and surgical results of 28 middle cranial base tumors for the purpose of selecting optimal surgical approach to the middle cranial base tumor. Methods : In this retrospective review, 28 patients, including 16 meningioma, 6 trigeminal neurinoma, 2 pituitary adenoma, 2 craniopharyngioma, 1 facial neurinoma, and 1 metastatic tumor, underwent surgical treatment using skull base technique. Of theses, 16 tumors were mainly confined to middle cranial fossae, 5 tumors with extension into both anterior and middle fossa, and 7 tumors with extension into both middle and posterior fossa. Tumors that confined to the middle cranial fossa or extended into the anterior cranial fossa were operated with modified pterional, orbitozygomatic or Dolen'c approach, and tumors that extended into the posterior cranial fossa were operated with anterior, posterior or combined transpetrosal approach. Completeness of tumor resection, surgical outcome, postoperative complication, and follow up result were studied. Results : Total tumor removal was achieved in 9 tumors of 10 tumors that did not extended to the cavernous sinus, and was achieved in 7 tumors of 8 tumors that extended to the lateral wall of the cavernous sinus. Of 10 tumors that extended to the venous channel of the cavernous sinus, only 2 were removed totally. Surgical outcome was excellent in 14 patients, good in 10, fair in 2 and poor in 2. There were no death in this series. Dumbell type tumor which extended into both middle and posterior fossae showed tendency of poor prognosis as compared with tumors that confined middle cranial fossa and extended into both anterior and middle cranial fossa. Postoperative dysfunctions were trieminal hypesthesia in 3, oculomotor nerve palsy in 2, abducens nerve palsy in 2, hemiparesis in 2, cerebellar sign in 1, facial palsy in 1 and hearing impairment in 1. Conclusion : Based on our findings and a review of the literature, we conclude that, when selecting the surgical approach to the middle cranial fossa tumors, the most important factors to be considered were exact location of the tumor mass and existence of the cavernous sinus invasion by tumor mass. We recommend modified pterional or orbitozygomatic approach in cases with tumors located anterior and middle cranial base, without cavernous sinus invasion. In cases with tumors invading into cavernous sinus, we recommend Dolen'c or orbitozygomatic approach. And in lateral wall mass and the cavernous sinus, it is preferred to approach the tumor extradurally. For the tumor involing with middle fossa and posterior fossa(dumbell type) a combined petrosal approach is necessary. In cases with cavernous sinus invasion and internal carotid artery encasement, we recommend subtotal resection of the tumor and radiation therapy to prevent permanent postoperative sequele.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.72-79
• /
• 2020

To ensure the safety of Advanced Driver Assistance Systems (ADAS) or autonomous vehicles, it is important to recognize the vehicle position, and specifically, the increased accuracy of the lateral position of the vehicle is required. In recent years, the quality of GPS signals has improved a lot and the price has decreased significantly, but extreme urban environments such as tunnels still pose a critical challenge. In this study, we proposed stable and precise lane recognition and tracking methods to solve these two issues via fusion of AVM images and vehicle sensor data using an extended Kalman filter. In addition, the vehicle's lateral position recognition and the abnormal state of RTK GPS were determined using this approach. The proposed method was validated via actual vehicle experiments in urban areas reporting multipath and signal disconnections.