• 한국음향학회지
• /
• 제14권1호
• /
• pp.108-114
• /
• 1995

입력단 또는 출력단이 원형 확장관 안으로 돌출되어 있는 소음기가 관내 전달 소음저감을 위해 많이 쓰이고 있다. 저주파수 영역에서의 소음저감 효과는 음파 진행 단면의 확장-축소와 입력단-출력단의 상대적 위치 등으로 발생되는 소음기의 리액티브 성분으로 설명이 된다. 본 연구에서는 입력 혹은 출력단에 동심으로 배치된 한개의 연장관이 단순 팽창형 소음기에 삽입되어 있는 경우에 대한 음향해석을 수행하였다. 해석방법으로는, 음장을 분리좌표계로 표현될 수 있는 몇개의 경계 표면으로 나누고, 각 표면에서의 음압 및 입자속도를 정규화된 음향 고유 모드로 전개하여 간단한 대수식으로 표현하였다. 제안된 해석적인 방법을 사용하여 소음기의 투과손실을 예측하였으며, 실험과도 잘 일치함을 관찰할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.536-541
• /
• 1998

Cylindrical chamber silencers with an extended inlet and outlet are widely used to reduce the propagated noise in ducts in many application fields. In this study, an acoustic analysis is carried out for concentric extended pipes inserted into a simple expansion chambers An algebraic equation is derived by using the eigenfunction expansion and orthogonality principle. Using this analytical method, transmission losses are predicted for several configurations of the concentric extended systems.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.45-53
• /
• 2004

An experimental study was carried out to obtain the fundamental data about the effects of radicals induced injection on premixture combustion. A constant volume combustor divided to the sub-chamber and the main chamber was used. The volume of the sub-chamber is set up to occupy less than 1.5％ of that of whole combustion chamber. Radial twelve narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in the sub-chamber will derive the simultaneous multi-point ignition in the main chamber. While the equivalence ratio of pre-mixture in the main chamber and the sub-chamber is uniform. We have examined the effects of the sub-chamber volume, the diameter of passage hole, and the equivalence ratio on the combustion characteristics by means of burning pressure measurement and flame visualization. In the case of radical ignition method(RI), the overall turning time including the ignition delay became very short and the maximum burning pressure was slightly increased in comparison with those of the conventional spark ignition method(SI), that is, single chamber combustion without the sub-chamber. The combustible lean limit by RI method is extended to more ER=0.25 than that by SI method. Therefore the decrease of every emission including NOx and the improvement of fuel consumption is anticipated due to lean burn.

• 한국음향학회지
• /
• 제21권5호
• /
• pp.503-509
• /
• 2002

입력단 및 출력단이 동심을 이루어 원형 확장관 안으로 연장되어 있는 소음기가 관내 전달 소음저감을 위해 널리 사용되고 있다. 이 소음기의 저주파수 영역에서의 소음저감 효과는 음파 진행 단면의 확장-축소와 입력단 및 출력단의 상대적 위치 등으로 발생되는 소음기의 리액티브 성분에 의해 설명이 된다. 본 논문에서는 입력단 및 출력단에 동심으로 배치된 연장관이 단순 팽창형 소음기 내부에 삽입되어 있는 경우에 대한 음향해석을 수행하였다. 해석방법으로는 음장을 분리좌표계로 표현될 수 있는 몇개의 경계 표면으로 나누고, 각 표면에서의 음압 및 입자속도를 정규화 된 음향 고유 모드로 전개하여 간단한 대수식으로 표현하였다. 이 해석적인 방법을 사용하여 소음기의 투과손실을 예측하였으며, 실험과도 잘 일치함을 관찰할 수 있었다.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.220-231
• /
• 1996

In this research, we use IDI type constant volume combustion chamber which may make up stratified combustion to construct the design back data of lean-burn engine. Some experiments are conducted by the passagehole angle in the adapter of main chamber and sub-chamber. The effects on the combustion characteristics according to the ignition timing are investigated. The used fuel is methanol prospective for alternative fuel. Fuel is injected under 10.78MPa using solenoid and accumulator. As the results of the experiment, combustion characteristics reveals that ignition timing, passagehole angle and shape greatly effects on. Lean inflammability limit is extended to 0.45 in equivalence ratio.

• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1652-1661
• /
• 2000

A visualization study using the schlieren method is adopted in an optically-accessible, cylindrical constant volume combustion chamber to identify the mechanism of ignition energy and ignition system interaction in spark ignited, lean gasoline-air mixture. In order to research the effects of ignition system on flame propagation, two kinds of ignition system are designed, and several kinds of spark plugs are tested and evaluated. To control the discharge energy, the dwell time is varied. The initial flame development is quantified in terms of 2-D images which provides information about the projected flame area and development velocity as a function of ignition system and discharge energy. The results show that high ignition energy and extended spark plug gap can shorten the combustion duration in lean mixtures. The material, diameter and configuration of electrodes the flame development by changing the transfer efficiency from electrical energy to chemical energy and discharge energy. However these factors do not affect of flame development as much a ignition energy or extended gap does.

• 대한기계학회논문집B
• /
• 제38권4호
• /
• pp.365-371
• /
• 2014

본 연구에서는 4단 화격자로 구성된 목재 펠릿 보일러의 연소실에 대하여 수치해석을 수행하였다. 목재 펠릿의 화염은 화격자에서 연소실 출구까지 신장되는 데 이 현상이 균질 반응에 기반한 수치해석 기법으로 잘 예측되었다. 수치해석으로 구한 유동장을 보면 연소실 상류에서 출구쪽으로 강한 재순환 유동이 형성되는데 이 유동을 따라 화염이 신장된다. 이와 같은 유동 및 연소 형태는 부분부하 조건에 대하여 수치해석을 수행하였을 때도 유지되었다. 따라서 연소실의 체적을 변경하는 것보다 연소실의 구조를 변경하는 것이 연소 효율을 개선하는 데 도움이 될 것으로 보인다. 본 연구에서는 수치해석 결과를 바탕으로 연소 효율을 높이기 위하여 연소실 출구 위치 변경하거나 화격자 개수를 늘이는 방안 또는 격벽과 같은 내부 구조물을 설치하는 방안을 제안하였다.

• 한국분무공학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2005

An experimental study was carried out to obtain the fundamental data about the effects of radical ignition on premixture combustion. A CVC(constant volume combustor) divided into the sub-chamber and the main chamber was used. Numerous narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in tile sub-chamber derives the simultaneous multi-point ignition in the main chamber. We have examined the effects of the sub-chamber volume, the diameter and number of passage holes, and the equivalence $ratio({\Phi})$ on the combustion characteristics by means of burning pressure measurement and flame visualization. In a CVC, the overall burning time including the ignition delay became very short and the maximum burning pressure was slightly increased by the radical ignition(RI) method in comparison with those by the conventional spark ignition(SI) method. Combustible lean limit by RI method is extended by ${\Phi}=0.25$ compared with that by SI method. Also, In cases of charging the number and the diameter for the fixed total cross section of the passage holes, combustion period increased significantly at a sub-chamber with a single hole, but those of the other conditions had almost a similar tendency in the sub-chamber with 4 or more holes. regardless of equivalence ratio. Therefore, it was Proved that a critical cross section exists with the number of passage holes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권2호
• /
• pp.181-191
• /
• 2002

Spray calculation has been studied to understand the behavior of the spray in a combustion chamber But the spray dispersion has not been predicted properly in a high velocity injection spray or a wall impaction spray. In this study the extended grazing collision model is applied to improve the problem. The gas phase is modelled by the Eulerian continuum conservation equations of mass, momentum, energy and fuel vapour fraction. The liquid phase is modelled following the discrete droplet model approach in Lagrangian form. The droplet distributions, penetration, width and gas flows are compared for the cases with or without extended model. The extended collision model makes the results better.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.161-165
• /
• 2007

Recently by the development of the electronic engineering technology various mobile devices are developed. But their operation time need to be extended although capacity of the batteries are limited. We focused our attention to the portable SOFC system. Because SOFC has the high efficiency and a lot of strongness in comparison with other kinds of fuel cells. In addition they can be built as a self/non-reformable system and single/dual chamber system. So We evaluated some types of SOFC theoretically, and compared the results from the fuel and performance efficiency point of view.