• 제목/요약/키워드: Expressway driving

검색결과 84건 처리시간 0.024초

가상주행 시뮬레이터를 활용한 시선유도시설 효과평가 연구 (Evaluation of Effectiveness on Delineation System Using Virtual Driving Simulator)

  • 박제진;김덕녕;박용진;송원철
    • 한국도로학회논문집
    • /
    • 제19권5호
    • /
    • pp.163-171
    • /
    • 2017
  • PURPOSES : Traffic safety facilities are used to prevent traffic accidents before they occur by providing drivers with information on traffic situations and the geometric design of roads. However, some facilities not defined in guidelines do not meet installation criteria, yet are being installed and used in order to increase efficiency in traffic flow and prevent traffic accidents in a specific expressway zone. In this study, we have evaluated the effect of delineation system which are not defined in the guideline criteria. METHODS : Different virtual scenarios were created for roads using expressway median barrier chevron signs, with a driving simulator used to evaluate the installation and operational effect of such signs. Ten experiments were performed with left- and right-curved roads at curve radius intervals of 500 m, from 500 m to 2,500 m. RESULTS : For sections with a curve radius of more than 1,500 m, drivers had a clear tendency toward stable driving regardless of delineation system. When a chevron sign is installed on a protection fence in the road curving left, an expanded installation is recommended up to the section with a curve radius of 1,000 m. According to the analysis results for the RHB (Relative High Beta spectrum), driving concentration also improved up to a curve radius of 1,000 m. CONCLUSIONS :The experiment result indicates the extent of biasing within a lane and the manipulation amount of steering handle, were analyzed and found to be affected by curve radius and road alignment regardless of delineation system.

주행속도선택 기반 주행위험도 평가방법론 개발 (차내 교통안전정보 제공 효과 평가를 중심으로) (A Methodology for Driving Risk Evaluation Based on Driving Speed Choice (Focusing on Impacts of Providing In-vehicle Traffic Warning Information))

  • 김원철
    • 대한교통학회지
    • /
    • 제29권1호
    • /
    • pp.95-102
    • /
    • 2011
  • 본 연구에서는 Solomon이 제안한 속도편차 (주행속도와 평균속도와의 차) 개념을 이용하여 주행위험도를 정립하고, 순서프로빗모형을 이용하여 주행속도선택 기반 주행위험도평가모델을 개발한다. 제안모델을 고속도로의 차내 교통안전정보 제공효과 평가실험에 적용하여, 주행위험에 미치는 다양한 요인의 효과를 분석한 결과, 다음과 같은 연구결과가 도출되었다. 첫째, 남성이 여성보다, 경력 운전자가 초보 운전자보다, 교통사고의 경험이 적은 운전자가 고속도로를 안전하게 주행할 확률이 높다. 둘째, 고속도로를 오후에 주행하는 경우, 도로표면이 젖어있는 경우, 교통량이 한산하여 서비스수준이 너무 좋은 경우 주행위험도는 증가한다. 셋째, 경사진 회전구간을 주행하는 경우와 도로연장이 긴 곡선부 구간을 주행하는 경우 주행위험도는 증가한다. 한편, 주행위험도 증가는 차내 교통안전정보를 제공함으로써 어느 정도 감소될 수 있는 것으로 나타나 차내 교통안전정보의 제공의 중요성이 확인되었다. 본 제안 모델은 새로 도입된 교통안전시설물의 교통안전도 효과를 평가 시 교통사고 자료가 부족하거나 없는 경우 교통안전도를 평가하는데 활용할 수 있다.

연속주행시간과 졸음사고간 통계적 상관관계 분석 (The Statistical Correlation Between Continuous Driving Time and Drowsy Accidents)

  • 김덕녕;김수진;최재헌;조종석
    • 대한교통학회지
    • /
    • 제35권5호
    • /
    • pp.423-433
    • /
    • 2017
  • 최근 5년간 집계된 고속도로 교통사고자료에 따르면 전체 사고건수의 20%, 사망자수의 30%가 졸음운전으로 발생되고 있다. 졸음사고는 운전자의 피로도가 누적되었을 때 주행능력을 상실한 운전자의 인적 요인으로부터 발생되며, 정성적으로 체감되는 피로도는 운전자의 연속주행시간을 통해 간접적으로 분석될 수 있다. 본 연구는 2시간 이상 연속 주행한 차량의 비율과 해당 링크에서 집계된 졸음사고간의 통계적 상관관계를 규명하는데 주된 목적을 둔다. 이를 위해 네비게이션 주행 궤적 자료를 활용하여 링크별 연속주행차량의 비율을 산출하였으며, 중부내륙 고속도로의 링크별 졸음사고 건수, 교통량, 구간길이를 변수로 하는 안전성능함수를 추정하였다. 본 연구에서는 다양한 형태의 안전성능함수가 추정되었으며, 도출된 통계치의 비교를 통해 연속주행시간과 졸음사고 발생간의 통계적 상관성이 다각적으로 분석되었다. 본 연구결과는 최근 화물차 및 여객버스 운전자의 연속주행을 단속하는 제도에 학술적 근거를 제공할 수 있을 것으로 판단하며, 궤적자료의 양적 질적 확대를 통해 향후 졸음방지 시설물의 설치 위치를 결정하는 전략 수립에 활용 가능할 것으로 기대한다.

Evaluation of abutment types on highway in terms on driving comfort

  • Nam, Moon S.;Park, Min-Cheol;Do, Jong-Nam
    • Geomechanics and Engineering
    • /
    • 제13권1호
    • /
    • pp.43-61
    • /
    • 2017
  • The inverted T-type abutments are generally used in highway bridges constructed in Korea. This type of abutment is used because it has greater stability, with more pile foundations embedded in the bedrock, while simultaneously providing support for lateral earth pressure and vertical loads of superstructures. However, the cross section of inverted T-type abutments is large compared with the piers, which makes them more expensive. In addition, a differential settlement between the abutment and embankment, as well as the expansion joints, causes driving discomfort. This study evaluated the driving comfort of several types of abutments to improve driving comfort on the abutment. To achieve this objective, a traditional T-type abutment and three types of candidate abutments, namely, mechanically stabilized earth wall (MSEW) abutment supported by a shallow foundation (called "true MSEW abutment"), MSEW abutment supported by piles (called "mixed MSEW abutment"), and pile bent and integral abutment with MSEW (called "MIP abutment"), were selected to consider their design and economic feasibility. Finite element analysis was performed using the design section of the candidate abutments. Subsequently, the settlements of each candidate abutment, approach slabs, and paved surfaces of the bridges were reviewed. Finally, the driving comfort on each candidate abutment was evaluated using a vehicle dynamic simulation. The true MSEW abutment demonstrated the most excellent driving comfort. However, this abutment can cause problems with respect to serviceability and maintenance due to excessive settlements. After our overall review, we determined that the mixed MSEW and the MIP abutments are the most appropriate abutment types to improve driving comfort by taking the highway conditions in Korea into consideration.

유입·유출특성을 고려한 고속도로 연결로의 교통사고 심각도 예측모형 (Prediction Models for the Severity of Traffic Accidents on Expressway On- and Off-Ramps)

  • 윤일수;박성호;윤정은;최진형;한음
    • 한국도로학회논문집
    • /
    • 제14권5호
    • /
    • pp.101-111
    • /
    • 2012
  • PURPOSES: Because expressway ramps are very complex segments where diverse roadway design elements dynamically change within relatively short length, drivers on ramps are required to drive their cars carefully for safety. Especially, ramps on expressways are designed to guarantee driving at high speed so that the risk and severity of traffic accidents on expressway ramps may be higher and more deadly than other facilities on expressways. Safe deceleration maneuvers are required on off-ramps, whereas safe acceleration maneuvers are necessary on onramps. This difference in required maneuvers may contribute to dissimilar patterns and severity of traffic accidents by ramp types. Therefore, this study was aimed at developing prediction models of the severity of traffic accidents on expressway on- and off-ramps separately in order to consider dissimilar patterns and severity of traffic accidents according to types of ramps. METHODS: Four-year-long traffic accident data between 2007 and 2010 were utilized to distinguish contributing design elements in conjunction with AADT and ramp length. The prediction models were built using the negative binomial regression model consisting of the severity of traffic accident as a dependent variable and contributing design elements as in independent variables. RESULTS: The developed regression models were evaluated using the traffic accident data of the ramps which was not used in building the models by comparing actual and estimated severity of traffic accidents. Conclusively, the average prediction error rates of on-ramps and offramps were 30.5% and 30.8% respectively. CONCLUSIONS: The prediction models for the severity of traffic accidents on expressway on- and off-ramps will be useful in enhancing the safety on expressway ramps as well as developing design guidelines for expressway ramps.

SPT 에너지효율 측정 롯드를 이용한 매입말뚝의 선단지지력 예측 (Prediction of End Bearing Capacity for Pre-Bored Steel Pipe Piles Using Instrumented Spt Rods)

  • 남문석;박영호;박용석
    • 한국지반공학회논문집
    • /
    • 제29권12호
    • /
    • pp.105-111
    • /
    • 2013
  • 국내외에서 널리 사용 중인 표준관입시험(Standard Penetration Test, SPT)은 작업의 용이성, 다양한 지반정수와 강도정수를 결정방법 등의 장점을 지니고 있다. 이러한 SPT 수행시에 발생하는 해머 에너지는 N치의 산정 및 보정에 매우 중요한 영향인자가 된다. SPT시험시 해머 타격에 의하여 롯드로 응력파가 전달되는 현상이 말뚝 항타 시에 발생하는 현상과 동일하다하여 SPT에 PDA장비를 적용하여 관입에너지를 측정하는 방법이 개발되어 사용 중에 있다. 본 연구에서는 SPT 롯드를 말뚝으로 가정하여 SPT 에너지 효율 측정롯드를 SPT시험과 동적콘관입시험에 적용하여 얻어진 힘과 속도의 파형을 매칭기법(CAPWAP, CAse Pile Wave Analysis Program) 분석을 수행하여 매입말뚝에 대한 극한선단지지력을 예측하는 기법을 제안하였다. 또한, SPT 에너지 효율 측정롯드에서 예측된 선단지지력과 실물 말뚝정재하시험을 통하여 산정된 선단지지력을 비교분석하였다. 연구결과를 토대로 SPT나 동적콘관입시험을 통하여 매입말뚝의 지지력을 간편하게 예측할 수 있는 경험식을 제시하였다.

차량 주행제어를 위한 신경회로망을 사용한 주행패턴 인식 알고리즘 (Driving Pattern Recognition Algorithm using Neural Network for Vehicle Driving Control)

  • 전순일;조성태;박진호;박영일;이장무
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집A
    • /
    • pp.505-510
    • /
    • 2000
  • Vehicle performances such as fuel consumption and catalyst-out emissions are affected by a driving pattern, which is defined as a driving cycle with the grade in this study. We developed an algorithm to recognize a current driving pattern by using a neural network. And this algorithm can be used in adapting the driving control strategy to the recognized driving pattern. First, we classified the general driving patterns into 6 representative driving patterns, which are composed of 3 urban driving patterns, 2 suburban driving patterns and 1 expressway driving pattern. A total of 24 parameters such as average cycle velocity, positive acceleration kinetic energy, relative duration spent at stop, average acceleration and average grade are chosen to characterize the driving patterns. Second, we used a neural network (especially the Hamming network) to decide which representative driving pattern is closest to the current driving pattern by comparing the inner products between them. And before calculating inner product, each element of the current and representative driving patterns is transformed into 1 and -1 array as to 4 levels. In the end, we simulated the driving pattern recognition algorithm in a temporary pattern composed of 6 representative driving patterns and, verified the reliable recognition performance.

  • PDF

Design criteria of wind barriers for traffic -Part 2: decision making process

  • Kim, Dong Hyawn;Kwon, Soon-Duck;Lee, Il Keun;Jo, Byung Wan
    • Wind and Structures
    • /
    • 제14권1호
    • /
    • pp.71-80
    • /
    • 2011
  • This study presents a decision making process for installation of wind barrier which is used to reduce the wind speed applied to running vehicles on expressway. To determine whether it is needed to install wind barrier or not, cost and benefit from wind barrier are calculated during lifetime. In obtaining car accidental risk, probabilistic distribution of wind speed, daily traffic volume, mixture ratio in the volume, and duration time for wind speed range are considered. It is recommended to install wind barrier if benefit from the barrier installation exceed construction cost. In the numerical examples, case studies were shown for risk and benefit calculation and main risky regions on Korean highway were all evaluated to identify the number of installation sites.

마이크로 시뮬레이션을 이용한 고속도로 화물차 전용차로 도입에 관한 연구 (A Study on The Introduction of Truck only Lane on Expressway using VISSIM)

  • 김명수
    • 대한토목학회논문집
    • /
    • 제33권4호
    • /
    • pp.1603-1610
    • /
    • 2013
  • 화물차 운송의 시간과 비용이 증가하여 물류비가 증가하게 되고 높은 물류비는 결과적으로 산업경쟁력의 저하로 이어지게 되므로 이 연구에서는 물류비 절감을 위해 고속도로에 화물차 전용차로 도입에 관한 연구를 실시하고자 한다. 연구의 대상지는 화물차의 통행이 많은 경부고속도로로 금호 JCT~남구미 IC 구간이고 이 구간에 기본차로, 버스전용차로 설치, 화물차 전용차로 설치, 두 전용차로를 설치시 그에 따른 운행속도, 밀도에 대해 도출하였다. 분석결과 화물차 전용차로 설치시 평균운행속도가 83.4km/h로 가장 높고 밀도는 22.47km/대로 가장 낮은 것으로 나타나 화물차 전용차로 도입시 긍정적인 영향을 미친다고 할 수 있다.

고속도로 터널 내 LED Digital 경관조명 디자인의 유형별 특징 비교 연구 (A Study on the Characteristics of Each Type of LED Digital Landscape Lighting in Expressway Tunnel)

  • 황예진
    • 디지털융복합연구
    • /
    • 제19권12호
    • /
    • pp.457-462
    • /
    • 2021
  • 우리나라 지형의 특성상 산지가 많아 고속도로 직선화 건설 시에는 터널 설치가 필수적인 요소이다. "2019년도 도로 교량 및 터널 현황조서" 통계에 따르면 터널은 2,682개소이고 2,077km로 전체 도로연장의 1.9%를 차지하고 있으며 10년 전에 비해 1,300개소로 94% 증가하고 있다. 국내외 연구에 따르면 고속도로 설치된 1Km이상 되는 장대터널들은 좁고 어두운 조명과 단조로운 벽면 디자인으로 인해 운전자로 하여금 집중력 저하 및 지루함을 느끼게 하여 피로와 졸음이 쉽게 발생한다. 이에 한국도로공사에서는 2020년까지 3Km 이상 터널 10곳을 대상으로 주의력 높이는 디자인 조명을 설치하였다. 본 연구는 터널 내부에서 발생할 수 있는 사고의 위험성을 개선하고자 한국고속도로에서 설치된 터널 내 LED 경관 조명 디자인을 유형별로 특징을 비교 분석하였다. 연구 결과를 바탕으로 향후 터널 내 LED 경관 조명 설치 시 운전자로 하여금 주행 안정성 확보와 피로와 졸음사고를 낮출 수 있는 효과적인 설치를 위한 기초자료 제공의 목적으로 한다.