• Journal of Korean Society of Forest Science
• /
• v.95 no.2
• /
• pp.216-219
• /
• 2006

After long exposure to low-density $SO_2$ the five tree species showed different changes in their visible damage: Ailanthus altissima showed no visible damage; Acanthopanax sessiliflorus, Populus alba ${\times}$ Populus glandulosa, and Platanus orientalis showed typical damage of yellow spots on their leaves; and Liriodendron tulipifera showed serious damage on the end of leaf tip. The photosynthesis rate of Liriodendron tulipifera and Acanthopanax sessiliflorus was usually lower than the control group: Ailanthus altissima, Populus alba ${\times}$ Populus glandulosa, and Platanus orientalis showed no difference from the control group, while Acanthopanax sessiliflorus and Liriodendron tulipifera showed large changes. In regard to the light compensation points, Ailanthus altissima showed similar values, Populus alba ${\times}$ Populus glandulosa and Platanus orientalis exposed to $SO_2$, showed 3 to $5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ higher values than the control group, and Acanthopanax sessiliflorus and Liriodendron tulipifera exposed to $SO_2$ showed approximately twice higher light compensation points.

• The Journal of the Korean dental association
• /
• v.36 no.2 s.345
• /
• pp.135-143
• /
• 1998

Cephalogram is one of the most important tool in researching growth and development of craniofacial area, orthodontic diagnosis and treatment planning. But its inherent distortion of actual length and angles during projecting three dimensional object to two dimensional plane might cause errors in quantitative analysis of shape and size. three dimensional high quality images can be obtained using computerized tomogram and have reported in literatures. Considering its expenses and amount of exposure to radiation, limitations still remain to be solved in its application to routine practice. construction of three dimensional image using principle of orientator can be obtained by biplanar stereoradiography. Theoretically two images, lateral and P-A can be used to construct three dimensional image provided that those are taken at same time by two different focal spots. As two images(lateral and P-A) obtained by conventional cephalogram have different head posture, those need compensation to construct three dimensional images. This study introduced principle of computerized head posture compensation and showed that conventional cephalogram could be used to construct three dimensional image and could be applied to routine orthodontic practice.

• Journal of Environmental Health Sciences
• /
• v.46 no.3
• /
• pp.335-343
• /
• 2020

Objectives: The Korean Ministry of Environment has identified cases of people suspected of suffering lung disease potentially caused by polyhexamethylene guanidine (PHMG) used in humidifier disinfectants (HDs). Exposure assessment for the HDs was conducted using a questionnaire during face-to-face interview. The main purposes of this study were to develop a methodology to effectively classify levels of exposure to HDs based on a questionnaire. Methods: We first identified the overall participants' exposure characteristics by HD exposure levels; Second, we selected misclassified subjects and investigated characteristics of overestimated and underestimated subjects, focusing on exposure cases to PHMG-containing HDs. An inhalation reference concentration (RfC) for PHMG was produced on the basis of inhalation toxicity values. We made a cross-tabulation of the exposure classes (Exposure classes 1-to-4) by clinical classes based on the RfC. When the value of the exposure class minus the clinical class was 0 or 1, we assumed these were true values. When the value was ≥2 and ≤ -2, we assigned these cases to the overestimation group and underestimation group, respectively. Results: The overestimated group may have already recovered and responded excessively due to psychological anxiety or in order to receive compensation. On the other hand, relatively high mortality rates and surrogate responses for those under 10 years of age may have resulted in inaccurate exposure assessment for underestimated groups. For the characteristics of exposure, it was shown that for the underestimated group, the exposure was relatively weaker than the overestimated group, even though a high overall clinical rating was determined. Conclusions: This study may suggest ways to reduce bias and overcome the limitations of current HD exposure assessment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.73-80
• /
• 2012

Recent research efforts have focused on combining high dynamic range imaging with super-resolution reconstruction to enhance both the intensity range and resolution of images. The processes developed to date start with a set of multiple-exposure input images with low dynamic range (LDR) and low resolution (LR), and require several procedural steps: conversion from LDR to HDR, SR reconstruction, and tone mapping. Input images captured with irregular exposure steps have an impact on the quality of the output images from this process. In this paper, we present a simplified framework to replace the separate procedures of previous methods that is also robust to different sets of input images. The proposed method first calculates weight maps to determine the best visible parts of the input images. The weight maps are then applied directly to SR reconstruction, and the best visible parts for the dark and highlighted areas of each input image are preserved without LDR-to-HDR conversion, resulting in high dynamic range. A new luminance control factor (LCF) is used during SR reconstruction to adjust the luminance of input images captured during irregular exposure steps and ensure acceptable luminance of the resulting output images. Experimental results show that the proposed method produces SR images of HDR quality with luminance compensation.

• Particle and aerosol research
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study is to assess respirable crystalline silica (RCS) exposure levels in workers who collect and dispose used coal briquette ash (CBA) in sanitation companies that are subcontracted by one medium-sized local government on the collection of municipal household waste (MHW), and to analyze the quartz content in CBA. When the CBA powder that undergone specialized pretreatment in several steps were subjected to mineral identification and quantitative analysis using X-ray diffraction (XRD), it was found that quartz represented 18%, and in addition, mullite, and plagioclase were included. For two CBA collectors, samples were collected by the personal sampling evaluation method. After respirable dust was collected in accordance with the National Institute for Occupational Safety and Health 7500 method, the concentration of quartz was analyzed using XRD. Meanwhile, a portable real-time dust monitor (Sidepak AM520, TSI Inc., USA) was also used to observe the dust exposure level for each time zone and job task. The RCS exposure level of one worker was as high as 0.024 mg/㎥, which was the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLV) level. The other worker also exhibited a concentration of 0.013 mg/㎥, which was more than half of TLV. The Sidepak results revealed that the work of collecting CBA and loading it onto a vehicle was hardly exposed to the dust of a significant level. It was found, however, that the work of transferring the collected CBA to a container through a conveyor belt was exposed to a very high average respirable dust concentration of 2.238 mg/㎥. The results of this study confirmed that quartz, which is crystalline silica and a carcinogen, is contained in CBA, one of municipal household waste (MHW), in high concentration. It was also confirmed that workers are exposed to high RCS concentrations while transferring collected CBA into a container. Although each local government in South Korea handles CBA in different ways, it is imperative to investigate the CBA exposure level of sanitation workers and improve their working conditions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.798-803
• /
• 2007

In case of minimized digital camera and mobile digital camera, it's difficult to get the high quality image by conventional AE(Auto Exposure) algorithm because of restriction of system organization. In this paper, a new algorithm that adopts a target setting, a compensation of feedback delay and a gamma correction, etc, are suggested for improving a noise increase and an output sensitivity decrease due to system minimization. We also suggest a method using fuzzy logic which can decide more effectively the ES(Electric Shutter) value and the AGC(Analog Gain Control) value than conventional system.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.134-145
• /
• 2015

Objectives: An objective of this study was to perform a risk assessment and social cost-benefit analysis for revising permissible exposure limits for seven substances: Nickel(Insoluble inorganic compounds), benzene, carbon disulfide, formaldehyde, cadmium(as compounds), trichloroethylene, touluene-2,4-diisocyanate. Materials and Methods: The research methods were divided into risk and hazard assessment and cost-benefit analysis. The risk and hazard assessment for the seven substances consists of four steps: An overview of GHS MSDS(1st), review of document of ACGIH's TLVs (2nd), comparison between international occupational exposure limits and domestic permissible exposure limits(3rd), and analysis of excess workplace and excess rate for occupational exposure limits based on previous work environment measurement data(4th). Total cost was estimated using cost of local exhaust ventilation, number of excess workplace and penalties for exceeding a permissible exposure limit. On the other hand, total benefit was calculated using the reduction rate of occupational disease, number of workplaces treating each substance and industrial accident compensation. Finally, the net benefit was calculated by subtracting total cost from total benefit. Results: All the substances investigated in this study were classified by CMR(Carcinogens, Mutagens or Reproductive toxicants) and their international occupational exposure limits were stricter than the domestic permissible exposure limits. As a result of excess rate analysis, trichloroethylene was the highest at 11%, whereas nickel was the lowest at 0.5%. The excess rates of all substances except for trichloroethylene were observed at less than 10%. Among the seven substances, the total cost was highest for trichloroethylene and lowest for carbon disulfide. The benefits for the seven substances were higher than costs estimated based on strengthening current permissible exposure limits. Thus, revising the permissible exposure limits of the seven substances was determined to be acceptable from a social perspective. Conclusions: The final revised permissible exposure limits suggested for the seven substances are as follows: $0.2mg/m^3$ for nickel, 0.5 ppm(TWA) and 2.5 ppm(STEL) for benzene, 1 ppm(TWA) for carbon disulfide, $0.01mg/m^3$(TWA) for cadmium, 10 ppm(TWA) and 25 ppm(STEL) for trichloroethylene, 0.3 ppm(TWA) for formaldehyde, and 0.005 ppm(TWA) and 0.02 ppm(STEL) for toluene diisocynate(isomers).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.416-424
• /
• 2018

Objective: The objective of this study was to estimate the numbers of employees occupationally exposed to noise according to their industry and size. Methods: A Delphi panel consisting of 15 occupational health experts estimated the exposure prevalence of noise in workplace. Data on Industrial Accident Compensation Insurance provided from Occupational Safety and Health Research Institute were combined to produce the exposure population. Results: In Korea, 16.0% of employees, 2,539,890 out of 15,838,926, was estimated to exposed to noise occupationally. The rate was 32.7% and 10.3% in manufacturing sector and non-manufacturing sector, respectively. The highest rate, 52.5%, was found in manufacturing industries of wood and of products of wood and cork(except furniture) and of other transport equipment. Sorted by their size of business, the rate was higher as the number of employee was larger in manufacturing sector. Conclusions: Compared to the same rate estimated in the US, 17.2%, the result of this study seems to be in a resonable range.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.284-290
• /
• 2023

Objectives: Work environment assessments were conducted to investigate epidemiologically several cases of lung cancer and COPD (chronic obstructive pulmonary disease) among workers in domestic quarries. Methods: We visited three quarries in South Korea where an epidemiological investigation was requested and measured total dust, respirable dust, and crystalline silica on rock drilling workers (4 people) and rock chipping workers (13 people). Measurement and analysis were conducted according to NIOSH (National Institute for Occupational Safety & Health) method 0500, NIOSH method 0600 for respirable dust, and NIOSH method 7500 for crystalline silica. Results: Among rock drilling workers the AMs (arithmetic mean) of total dust concentrations, respirable dust concentrations, and crystalline silica concentrations were 3.462 mg/m³ (range: 0.764~6.085 mg/m³), 0.613 mg/m³ (range: 0.153~1.251 mg/m³), and 0.105 mg/m³ (range: 0.012~0.228 mg/m³), respectively. Among rock chipping workers, the AMs of total dust concentrations, respirable dust concentrations, and crystalline silica concentrations were 2.446 mg/m³ (range: 0.156~8.494 mg/m³), 0.488 mg/m³ (range: 0.028~1.536 mg/m³), and 0.099 mg/m³ (range: 0.004~0.274 mg/m³), respectively. Conclusions: Although it cannot be said that the dust concentrations were high for both rock drilling workers and rock chipping workers, the concentrations of crystalline silica were found to be high. If such work is performed for a long period of time, diseases such as lung cancer and COPD may occur, so the work environment needs to be improved.

• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.201-209
• /
• 2011

The incidence of asbestos-related diseases (ARD) has increased in the last four decades. In view of the historical use of asbestos in Singapore since the country started banning it in phases in 1989 and the long latency of the disease, the incidence of ARD can be expected to increase further. As occupational exposure to asbestos still occurs, preventive measures to eliminate ARD continue to be required to protect the health of both workers and the public from asbestos exposure. The majority of occupational exposures to asbestos at present occur during the removal of old buildings. Preventive measures have been utilized by different government ministries and agencies in eliminating ARD in Singapore over the past 40 years. These measures have included the enforcement of legislation, substitution with safer materials, and engineering controls during asbestos removal as well as improvements in personal hygiene and the use of personal protective equipment. The existing Workman's Compensation System for ARD should be further refined, given that is currently stipulates that claims for asbestosis and malignant mesothelioma be made within 36 and 12 months after ceasing employment.