• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1121-1128
• /
• 1999

A single blow, transient testing method for determining the heat transfer characteristics of heat exchanger surfaces are presented. The exponential inlet temperature variations were made using screen mesh with small time constant and frontal velocities of the test section. The system is used to investigate the usefulness of a model with exponential inlet temperature variations. A data reduction program is developed to calculate the temporally and spatially averaged heat transfer coefficient using the measured disturbance and response of the fluid temperature. The results are compared with the existing theoretical and experimental data for parallel plate stacks. It was recommended to take an average for the time greater than the 99% of the final temperature had reached in order to obtain fairly good results.

• 설비공학논문집
• /
• 제11권5호
• /
• pp.561-569
• /
• 1999

The effects of longitudinal heat conduction on the performance of heat transfer surfaces are investigated by using a single-blow method. In the transient testing method for determining the heat transfer characteristics, exponential inlet temperature variations are made by using screen-mesh heater with small time constant and low frontal velocities of the test section, and the experimentally determined inlet temperature profile is used as the inlet fluid temperature condition. The effects of longitudinal heat conduction are negligible only if $\gamma^\act<0.05\;and \;N_{tu}\le3$ and should be considered if $N_{tu}\le3$ The test results ate compared with the existing theoretical and experimental data and the validity of this technique is confirmed by the good agreement.

• Journal of Ecology and Environment
• /
• 제33권2호
• /
• pp.165-173
• /
• 2010

Soil respiration ($R_S$) is a critical component of the annual carbon balance of forests, but few studies thus far have attempted to evaluate empirical regression models in $R_S$. The principal objectives of this study were to evaluate the relationship between $R_S$ rates and soil temperature (ST) and soil water content (SWC) in soil from a cool-temperate deciduous broad-leaved forest, and to evaluate empirical regression models for the prediction of $R_S$ using ST and SWC. We have been measuring $R_S$, using an open-flow gas-exchange system with an infrared gas analyzer during the snowfree season from 1999 to 2001 at the Takayama Forest, Japan. To evaluate the empirical regression models used for the prediction of $R_S$, we compared a simple exponential regression (flux = $ae^{bt}$Eq. [1]) and two polynomial multiple-regression models (flux = $ae^{bt}{\times}({\theta}{\nu}-c){\times}(d-{\theta}{\nu})^f:$ Eq. [2] and flux = $ae^{bt}{\times}(1-(1-({\theta}{\nu}/c))^2)$: Eq. [3]) that included two variables (ST: t and SWC: ${\theta}{\nu}$) and that utilized hourly data for $R_S$. In general, daily mean $R_S$ rates were positively well-correlated with ST, but no significant correlations were observed with any significant frequency between the ST and $R_S$ rates on periods of a day based on the hourly $R_S$ data. Eq. (2) has many more site-specific parameters than Eq. (3) and resulted in some significant underestimation. The empirical regression, Eq. (3) was best explained by temporal variations, as it provided a more unbiased fit to the data compared to Eq. (2). The Eq. (3) (ST $\times$ SWC function) also increased the predictive ability as compared to Eq. (1) (only ST exponential function), increasing the $R^2$ from 0.71 to 0.78.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.762-766
• /
• 1995

The coercive field $H_{c}$ of amorphous Y-Fe alloys in the spin-glass state has been investigated. Foramorphous $Y_{10}Fe_{90}$ alloy, the thermal variations of $H_{c}$ in the maximum external field $H_{max}=300,\;600$ and 1 k Oe exhibit a maximum. Since spin-glass behavior is strongly affected by external magnetic fields, the maximum point moves to lower temperature with increasing $H_{max}$. The appearance of the maximum in $H_{c}$ has been discussed in terms of the change of the spin-glass state in the external magnetic field. When the value of $H_{max}$ is 55 kOe, the temperature dependence of $H_{c}$ has no maximum and shows an exponential decrease with increasing temperature. Similar trends have been observed over a wide concentration range. The concentration dependence of $H_{c}$ is associated with the magnetic phase diagram.

• Journal of Information Display
• /
• 제12권1호
• /
• pp.23-27
• /
• 2011

The correlation between the temporal and spatial variations of the elastic constant and temperature change was examined for a light guide plate (LGP) adopted in the edge-lit light-emitting-diode backlight for mobile applications, using the micro- Brillouin light scattering method. The velocity of sound and the elastic constant $C_{11}$ of an LGP made from bisphenol-A polycarbonate (PC) were investigated as functions of temperature, time, and position on the LGP. The temporal variation of $C_{11}$ exhibited an exponential decay, while the spatial variation of $C_{11}$ reflected the temperature distribution on the LGP. The glass transition temperature of the PC LGP was found to be located at $155^{\circ}C$. The result showed that systematic transformation between the elastic property and the temperature is possible and that the temperature distribution on the bulk LGP can be accurately probed via the present experiment method, without using any special temperature measurement equipment.

• 대한토목학회논문집
• /
• 제3권4호
• /
• pp.143-148
• /
• 1983

크리이프, 건조수축(乾燥收縮), 노화현상(老化現象), 온도변형등(溫度變形等) 콘크리트구조물(構造物)의 시간의존성변형(時間依存性變形)에 대한 일반적(一般的) 수치해석법(數値解析法)을 제시(提示)하였다. 크리이프는 콘크리트의 연령(年齡)과 온도변화(溫度變化)의 함수인 중량적분(重量積分)으로 표시하였는데 특수(特殊)한 형태(形態)의 크리이프함수(凾數)를 사용함으로써 효과적(効果的)인 수치해석(數値解析)이 가능(可能)하게 되었다. 수치해석예(數値解析例)를 통하여 이 방법(方法)의 정확성(正確性)을 입증하였다.

• 대한설비공학회지:설비저널
• /
• 제16권5호
• /
• pp.504-515
• /
• 1987

This study conducts an analysis for the heat diffusion of an annular fin considering con-vection phenomena at the fin edge as well as along the fin perimeter. When the temperature of the fin base is given with an increasing exponential function, the exact series solutions of tem-perature distribution are obtained by laplace transformation in terms of dimensionless para-meters. From these solutions heat flux and fin efficiency can be obtained. These exact solu-tions converge rapidly for large values of dimensionless time, but slowly for small ones. To avoid this convergence difficulty, approximate solutions of the temperature distribution and heat flux for small values of dimensionless time are also presented. Substituting the variations of dimensionless parameters into the these exact solutions, the characteristics of these response are investigated.

• Geomechanics and Engineering
• /
• 제16권5호
• /
• pp.483-493
• /
• 2018

Experimental study of the deterioration of high-temperature rock subjected to rapid cooling is essential for thermal engineering applications. To evaluate the influence of thermal shock on heated granite with different temperatures, laboratory tests were conducted to record the changes in the physical properties of granite specimens and the dynamic mechanical characteristics of granite after rapid cooling were experimentally investigated by using a split Hopkinson pressure bar (SHPB). The results indicate that there are threshold temperatures ($500-600^{\circ}C$) for variations in density, porosity, and P-wave velocity of granite with increasing treatment temperature. The stress-strain curves of $500-1000^{\circ}C$ show the brittle-plastic transition of tested granite specimens. It was also found that in the temperature range of $200-400^{\circ}C$, the through-cracks induced by rapid cooling have a decisive influence on the failure pattern of rock specimens under dynamic load. Moreover, the increase of crack density due to higher treatment temperature will result in the dilution of thermal shock effect for the rocks at temperatures above $500^{\circ}C$. Eventually, a fitting formula was established to relate the dynamic peak strength of pretreated granite to the crack density, which is the exponential function.

• Structural Engineering and Mechanics
• /
• 제57권5호
• /
• pp.823-835
• /
• 2016

Using the Complementary Functions Method (CFM), a general solution for the one-dimensional steady-state thermal and mechanical stresses in a hollow thick sphere made of functionally graded material (FGM) is presented. The mechanical properties are assumed to obey the exponential variations in the radial direction, and the Poisson's ratio is assumed to be constant, with general thermal and mechanical boundary conditions on the inside and outside surfaces of the sphere. In the present paper, a semi-analytical iterative technique, one of the most efficient unified method, is employed to solve the heat conduction equation and the Navier equation. For different values of inhomogeneity constant, distributions of radial displacement, radial stress, circumferential stress, and effective stress, as a function of radial direction, are obtained. Various material models from the literature are used and corresponding temperature distributions and stress distributions are computed. Verification of the proposed method is done using benchmark solutions available in the literature for some special cases and virtually exact results are obtained.

• 한국농림기상학회지
• /
• 제15권3호
• /
• pp.186-190
• /
• 2013

산림생태계 토양 호흡량은 지구탄소순환에 중요한 역할을 한다. 본 연구는 금산 장기생태 연구 조사지 낙엽활엽수림을 대상으로 4년 동안 토양 이산화탄소 방출량의 연 변동을 조사하였다. 금산 장기생태 연구 조사지 월별 토양 이산화탄소 방출량은 토양온도 변화와 밀접한 관계가 있었으며 토양수분함량과는 뚜렷한 경향을 보이지 않았다(P > 0.05). 동절기(1월과 2월, 2007년의 경우 1월부터 3월)를 제외한 평균 토양 이산화탄소 방출량은 2008년 0.32 g $CO_2\;m^{-2}h^{-1}$, 2009년 0.40g $CO_2\;m^{-2}h^{-1}$, 2007년 0.41g $CO_2\;m^{-2}h^{-1}$, 2010년 0.54 g $CO_2\;m^{-2}h^{-1}$ 순이었으며, 2008년의 연 평균토양온도는 $12.0^{\circ}C$로 다른 연도의 토양 온도 $13.0-13.5^{\circ}C$에 비해 유의적으로(P<0.05) 낮았다. 토양 이산화탄소 방출량과 토양 20cm 깊이의 토양온도는 지수함수 관계가 있었으며 ($R^2$ = 0.31-0.75, P < 0.05), 토양수분함량은 토양 이산화탄소 방출량과 유의적인 관계가 없었다(P > 0.05). 본 연구 결과에 따르면 금산장기생태연구 조사지 토양 이산화탄소 방출량의 연 변동은 토양수분보다는 토양온도 변화와 관계가 있었다.