• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.50-63
• /
• 2015

Explosive bolts are one of pyrotechnic release devices, which are highly reliable and efficient for a built-in release. Among them, ridge-cut explosive bolts which utilize shock wave generated by detonation to separate bolt body produce minimal fragments, little swelling and clean breaks. In this study, separation phenomena of ridge-cut explosive bolts or ridge-cut mechanism are computationally analyzed using Hydrocodes. To analyze separation mechanism of ridge-cut explosive bolts, fluid-structure interactions with complex material modeling are essential. For modeling of high explosives (RDX and PETN), Euler elements with Jones-Wilkins-Lee E.O.S. are utilized. For Lagrange elements of bolt body structures, shock E.O.S., Johnson-Cook strength model, and principal stress failure criteria are used. From the computational analysis of the author's explosive bolt model, computational analysis framework is verified and perfected with tuned failure criteria. Practical design improvements are also suggested based on a parametric study. Some design parameters, such as explosive weights, ridge angle, and ridge position, are chosen that might affect the separation reliability; and analysis is carried out for several designs. The results of this study provide useful information to avoid unnecessary separation experiments related with design parameters.

• 한국대기환경학회지
• /
• 제33권5호
• /
• pp.521-528
• /
• 2017

In the combustion treatment of explosive gases with a high heating value such as $H_2$ and $NH_3$ used in semiconductor and chemical processes, the heat recovery modeling and exergy analysis of the process using the Aspen Plus simulator and its thermodynamic data were performed to examine the recovery of high temperature thermal energy. The heat recovery process was analyzed through this process modeling while the exergy results clearly confirmed that the rigorous reaction mainly occurs in the condenser and the chamber. In addition, the process modeling demonstrated that approximately 95% of the exergy is destructed on the basis of the exergies injected and the exergy being exhausted. Using the exergy technique, which can quantitatively analyze the energy, we could understand the energy flow in the process and confirm that our heat recovery process was efficiently designed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.532-543
• /
• 2004

The present work have been developed the interpretation processor including the behavior of material failure and the separation phenomena under transient dynamic loading (the operation of explosive bolt) using AUTODYN V4.3, SoildWork 2003 and TrueGrid V2.1 programs. It has been demonstrated that the interpretation in ridge-cut explosive bolt under dynamic loading condition should be necessary to the appropriate failure model and the basic stress of bolt failure is the principal stress. The use of this interpretation processor developing the present work could be extensively helped to design the shape and the amount of explosives in the explosive bolt having a complex geometry. It is also proved that the interpretation processor approach is an accurate and effective analysis technique to evaluate the separation mechanism in explosive bolts.

• 한국연소학회지
• /
• 제11권4호
• /
• pp.9-13
• /
• 2006

Recent advances in energetic materials modeling and high-resolution hydrocode simulation enable enhanced computational analysis of bio-medical treatments that utilize high-pressure shock waves. Of particular interest is in designing devices that use such technology in medical treatments. For example, the generated micro shock waves with peak pressure on orders of 10 GPa can be used for treatments such as kidney stone removal, transdermal micro-particle delivery, and cancer cell removal. In this work, we present a new computational methodology for applying the high explosive dynamics to bio-medical treatments by making use of high pressure shock physics and multi-material wave interactions. The preliminary calculations conducted by the in-house code, GIBBS2D, captures various features that are observed from the actual experiments under the similar test conditions. We expect to gain novel insights in applying explosive shock wave physics to the bio-medical science involving drug injection. Our forthcoming papers will illustrate the quantitative comparison of the modeled results against the experimental data.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.213-217
• /
• 2006

Recent advances in energetic materials modeling and high-resolution hydrocode simulation enable enhanced computational analysis of bio-medical treatments that utilize high-pressure shock waves. Of particular interest is in designing devices that use such technology in medical treatments. For example, the generated micro shock waves with peak pressure on orders of 10 GPa can be used for treatments such as kidney stone removal, trans-dermal micro-particle delivery. and cancer cell removal. In this work, we present a new computational methodology for applying the high explosive dynamics to bio-medical treatments by making use of high pressure shock physics and multi-material wave interactions. The preliminary calculations conducted by the in-house code, GIBBS2D, captures various features that are observed from the actual experiments under the similar test conditions. We expect to gain novel insights in applying explosive shock wave physics to the bio-medical science involving drug injection. Our forthcoming papers will illustrate the quantitative comparison of the modeled results against the experimental data.

• Steel and Composite Structures
• /
• 제31권3호
• /
• pp.233-242
• /
• 2019

Early detection of damage bonding state such as insufficient bonding strength and interface partial contact defect for the explosive clad pipe is crucial in order to avoid sudden failure and even catastrophic accidents. A generalized and efficient model of the explosive clad pipe can reveal the relationship between bonding state and vibration characteristics, and provide foundations and priory knowledge for bonding state detection by signal processing technique. In this paper, the slender explosive clad pipe is regarded as two parallel elastic beams continuously joined by an elastic layer, and the elastic layer is capable to describe the non-uniform bonding state. By taking the characteristic beam modal functions as the admissible functions, the Rayleigh-Ritz method is employed to derive the dynamic model which enables one to consider inhomogeneous system and any boundary conditions. Then, the proposed model is validated by both numerical results and experiment. Parametric studies are carried out to investigate the effects of bonding strength and the length of partial contact defect on the natural frequency and forced response of the explosive clad pipe. A potential method for identifying the bonding quality of the explosive clad pipe is also discussed in this paper.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.217-225
• /
• 2010

격벽 착화 모듈은 도우너 화약이 폭발하면서 발생한 충격파가 격벽을 통해 억셉터 화약에 전달되었을 때 동작한다. 격벽 착화 모듈의 가장 중요한 설계 요소인 격벽의 최소 두께를 결정하기 위하여 구조해석을 수행한 결과 격벽의 두께가 0.1 mm 이상인 경우 구조적으로 충분한 마진이 있음을 확인하였다. 격벽의 적정 두께를 결정하기 위하여 VISAR 간섭계를 이용하여 억셉터 화약 충전면에서 자유 표면 속도를 계측하였다. 이 속도를 이용하여 충격 압력으로 환산하고 그 결과를 억셉터 화약의 반응 민감도와 비교함으로서 격벽 두께에 따른 격벽 착화 모듈의 작동 신뢰도를 계산하였다.

• 한국추진공학회지
• /
• 제14권4호
• /
• pp.16-24
• /
• 2010

격벽 착화 모듈은 도우너 화약이 폭발하면서 발생한 충격파가 격벽을 통해 억셉터 화약에 전달되었을 때 동작한다. 격벽 착화 모듈의 가장 중요한 설계 요소인 격벽의 최소 두께를 결정하기 위하여 구조해석을 수행한 결과 격벽의 두께가 0.1 mm 이상인 경우 구조적으로 충분한 마진이 있음을 확인하였다. 격벽의 적정 두께를 결정하기 위하여 VISAR 간섭계를 이용하여 억셉터 화약 충전면에서 자유 표면 속도를 계측하였다. 이 속도를 이용하여 충격 압력으로 환산하고 그 결과를 억셉터 화약의 반응 민감도와 비교함으로서 격벽 두께에 따른 격벽 착화 모듈의 작동 신뢰도를 계산하였다.

• 한국전산구조공학회논문집
• /
• 제24권2호
• /
• pp.133-140
• /
• 2011

대형 구조물에 주로 사용되는 고강도 콘크리트는 화재 시 폭렬이 발생하여 구조물의 심각한 손상을 초래한다. 최근 고강도 콘크리트의 폭렬현상을 감소시켜 구조물의 내화성능을 확보하기 위한 다양한 연구가 진행되고 있으며, 본 논문에서는 섬유를 혼입한 고강도 콘크리트에 대한 내화해석 모델을 제시하였다. 섬유의 거동 및 고온에서의 콘크리트 내부의 물리적인 현상을 고려하여 수정한 고강도 콘크리트의 재료모델을 섬유혼입 고강도 콘크리트의 재료모델로 선택하였다. 수정된 재료모델을 이용하여 얻은 섬유혼입 고강도 콘크리트의 내화해석 결과를 실험결과와 비교하였고, 섬유혼입 고강도 콘크리트 재료모델을 제안하였다.

• Computers and Concrete
• /
• 제9권4호
• /
• pp.293-310
• /
• 2012

This paper discusses a new constitutive model called the high-rate brittle microplane (HRBM) model and also presents the details of a new software package called the Virtual Materials Laboratory (VML). The VML software package was developed to address the challenges of fitting complex material models such as the HRBM model to material property test data and to study the behavior of those models under a wide variety of stress- and strain-paths. VML employs Continuous Evolutionary Algorithms (CEA) in conjunction with gradient search methods to create automatic fitting algorithms to determine constitutive model parameters. The VML code is used to fit the new HRBM model to a well-characterized conventional strength concrete called WES5000. Finally, the ability of the new HRBM model to provide high-fidelity simulations of material property experiments is demonstrated by comparing HRBM simulations to laboratory material property data.