• Structural Engineering and Mechanics
• /
• v.62 no.2
• /
• pp.151-162
• /
• 2017

Two $Chang-{\alpha}$ dissipative family methods and two $KR-{\alpha}$ family methods were developed for time integration recently. Although the four family methods are in the category of the dissipative structure-dependent integration methods, their performances may be drastically different due to the detrimental property of weak instability or overshoot for the two $KR-{\alpha}$ family methods. This weak instability or overshoot will result in an adverse overshooting behavior or even numerical instability. In general, the four family methods can possess very similar numerical properties, such as unconditional stability, second-order accuracy, explicit formulation and controllable numerical damping. However, the two $KR-{\alpha}$ family methods are found to possess a weak instability property or overshoot in the high frequency responses to any nonzero initial conditions and thus this property will hinder them from practical applications. Whereas, the two $Chang-{\alpha}$ dissipative family methods have no such an adverse property. As a result, the performances of the two $Chang-{\alpha}$ dissipative family methods are much better than for the two $KR-{\alpha}$ family methods. Analytical assessments of all the four family methods are conducted in this work and numerical examples are used to confirm the analytical predictions.

• Structural Engineering and Mechanics
• /
• v.62 no.4
• /
• pp.443-453
• /
• 2017

The performance of bolted side-plated (BSP) beams is affected by the degree of transverse partial interaction, which is a result of the interfacial slip caused by transverse shear transfer between the bolted steel plates and the reinforced concrete beams. However, explicit formulae for the transverse shear transfer profile have yet to be derived. In this paper, a simplified piecewise linear shear transfer model was proposed based on force superposition principle and simplification of shear transfer profiles derived from a previous numerical study. The magnitude of shear transfer was determined by force equilibrium and displacement compatibility condition. A set of design formulae for BSP beams under several basic load cases was also derived. Then the model was verified by test results. A worked example was also provided to illustrate the application of the proposed design formulae. This paper sheds some light on the shear force transfer mechanism of anchor bolts in BSP beams, and offers a practical method to evaluate the influence of transverse partial interaction in strengthening design.

• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.179-194
• /
• 2018

Reliable and accurate method of computationally aided design processes of advanced thin walled structures in automotive industries are much essential for the efficient usage of smart materials, that possess higher energy absorption in dynamic compression loading. In this paper, most versatile components i.e., thin walled crash tubes with different geometrical profiles are introduced in view of mitigating the impact of varying cross section in crash behavior and energy absorption characteristics. Apart from the geometrical parameters such as length, diameter and thickness, the non-dimensionalized parameters of average forces which control the plastic bending moment for varying thickness has explored in view of quantifying its impact on the crashworthiness of the structure. The explicit finite element code ABAQUS is utilized to conduct the numerical studies to examine the effect of parametric modifications in crash behavior and energy absorption. Also the simulation results are experimentally validated. It is evident that the circular cross-sectional tubes are preferable as high collision impact shock absorbers due to their ability in withstanding axial and oblique impact loads effectively. Furthermore, the specific energy absorption (SEA), crash force efficiency (CFE), plastic bending moment, peak force responses and its impact for optimally tailoring a design to cater the crashworthiness requirements are investigated. The primary outcome of the study is to provide sufficient information on circular tubes for the use of energy absorbers where impact oblique loading is expected.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.519-524
• /
• 2004

This study is concerned with the braking distance estimation using frictional energy rate. First, steady state rolling analysis is performed, and using this result, the braking distance is estimated. Dynamic rolling analysis during entire braking time period is impratical, so that this study divides the vehicle velocity by 10km/h to reduce the analysis time. The multiplication of the slip rate and the shear stress provides the frictional energy rate. Using frictional energy rate, total braking distance is estimated, In addition, ABS(Anti-lock Brake System) is considered, and two type of slip ratios are compared, One is 15% slip ratio for the ABS condition, and the other is 100% slip ratio which leads lo the almost same braking distance as the elementary kinematic theory. A slip ratio is controlled by angular velocity in ABAQUS/Explicit, A 15% slip ratio gives the real vehicle's braking distance when the frictional energy occurred al disk pad is included. Disk pad's frictional energy rate is calculated by the theoretical approach.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.105-112
• /
• 2010

Dual Pulse Rocket Motor is a solid rocket motor with two grains separated by a bulkhead and rupture disc. The elasto-plastic explicit dynamic analysis of rupture disc was conducted by finite element method. The effect of the slit geometry of a rupture disc was analyzed for rupture time and shape by the parametric study. The results can be used to control the rupture pressure by the change the slit geometry of a rupture disc.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2238-2249
• /
• 2020

In a seismic PSA, dependency among seismic failures of components has not been explicitly modeled in the fault tree or event tree. This dependency is separately identified and assigned with numbers that range from zero to unity that reflect the level of the mutual correlation among seismic failures. Because of complexity and difficulty in calculating combination probabilities of correlated seismic failures in complex seismic event tree and fault tree, there has been a great need of development to explicitly model seismic correlation in terms of seismic common cause failures (CCFs). If seismic correlations are converted into seismic CCFs, it is possible to calculate an accurate value of a top event probability or frequency of a complex seismic fault tree by using the same procedure as for internal, fire, and flooding PSA. This study first proposes a methodology to explicitly model seismic dependency by converting correlated seismic failures into seismic CCFs. As a result, this methodology will allow systems analysts to quantify seismic risk as what they have done with the CCF method in internal, fire, and flooding PSA.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.1
• /
• pp.65-87
• /
• 2016

The purpose of this study is to examine Korean journals related to science education in order to analyze research trends into Nature of science in Korea. The subject of the study is the level of Korean Citation Index (KCI-listed, KCI listing candidates), that can be searched by the key phrase, "Nature of science" in Korean language through the RISS service. In this study, the Descriptive Statistical Analysis Method is utilized to discover the number of research articles, classifying them by year and by journal. Also, the Sementic Network Analysis was conducted to Word Cloud Analysis the frequency of key words, Centrality Analysis, co-occurrence and Cluster Dendrogram Analysis throughout a variety of research articles. The results show that 91 research papers were published in 25 journals from 1991 to 2015. Specifically, the 2 major journals published more than 50% of the total papers. In relation to research fields., In addition, key phrases, such as 'Analysis', 'recognition', 'lessons', 'science textbook', 'History of Science' and 'influence' are the most frequently used among the research studies. Finally, there are small language networks that appear concurrently as below: [Nature of science - high school student - recognize], [Explicit - lesson - effect], [elementary school - science textbook - analysis]. Research topic have been gradually diversified. However, many studies still put their focus on analysis and research aspects, and there have been little research on the Teaching and learning methods.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.327-334
• /
• 1994

The manifold designates a pipe system discharging or absorbing water through multiple holes installed along the finite length of the pipe. The proper design of the manifold requires the pre-analysis of the hydraulic characteristics such as system head and flow rate. head loss and hole discharges, etc. On the contrary to the general pipe systems. the head loss along the pipe is hardly quantified in an explicit way since it is complicately varied by the size and arrangement of the holes. In the present study, both energy and continuity equations are employed to analyze the hydraulic characteristics, constituting nonlinear simultaneous equations which are solved by Newton method. In addition, a hydraulic experiment utilizing the manifold system equipped with an automatically controlled valve is performed to reproduce model tide. The result shows that the manifold system can be effectively used in a tidal basin where water flow should be maintained uniformly over the basin width.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.100-106
• /
• 2006

NiTi alloy known as its shape memory effect also has superelastic characteristic, which makes it possible to be elastic under large deformation. Since the tensile strength of the alloy is very high and density is low compared to carbon steel, it can be applied to lightweight structural design. In order to design structures with shape memory alloy, finite element analysis is used and a constitutive algorithm based on Aurrichio's model is added to LS-DYNA as a user subroutine. Explicit time integration and shell element formulation are used to simulate thin-walled structures. The algorithm uses Drucker-Prager type loading condition to calculate martensite volume fraction during the transformation. The implemented algorithm is verified in uni-axial loading condition and martensite phase transformation can be detected well with the algorithm. In this study, as a energy absorbing structure, thin-walled tube is modeled with finite elements and the deformation behavior is studied. Simulation results has shown that the martensite transformation was generated in loading condition. After plastic deformation reached, the load decreases linearly without reverse martensite transformation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.159-162
• /
• 2005

The milli-components for electronic and medical device etc. have been manufactured by conventional process. Forming and machining process for those milli-components need tremendous cost and time because products require higher dimensional accuracy than the conventional ones. For instance, conventional mechanical punching process has many drawbacks for applying to high accuracy products. The final radius of hole can be varied and burr which interrupting another procedure is generated. Hydro-mechanical punching process makes possible to reduce amount of burr and obtain the fine shearing surface using the operating fluid. Hydrostatic pressure retards occurrence of initial crack and induces to locate the fracture surface in the middle of sheet to thickness direction. In this paper, Hydro-mechanical punching process is analyzed using finite element method and the effect of hydrostatic pressure is evaluated during punching process. The prediction of fracture is performed adopting the various ductile fracture criteria such as Cockcroft, Brozzo and Oyane's criterion using a user subroutine in ABAQUS explicit.