• Wind and Structures
• /
• 제3권4호
• /
• pp.255-266
• /
• 2000

Wind-induced interference effects on a building are the result of one or more adjacent buildings modifying the flow of wind around it, which may result in a significant increase or decrease in wind loads on the building. Wind loading standards and codes of practice offer little guidance to the designer for assessing the effects of interference. Experimental results on interference effects indicate that code recommendations may be significantly low (unsafe) or uneconomically conservative. The paper presents results of an extensive experimental program to study the wind flow mechanisms and to quantify the extent of wind load modifications on buildings due to interference effects. These results have been simplified and presented from the point-of-view of design and codification for the case of two buildings. Based on these results, general guidelines and limiting conditions defining wind interference are formulated and discussed.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.94-100
• /
• 2003

Gel-like compounds containing flammable solvents were prepared to use fur cleaning agents in field of innovative industries and general purposes. And experiments were conducted to improve the defects of liquified flammable solvents from the view point of safety and health hazards. Flammable solvents used in this study were several single component flammable solvents(turpentine oil, N-methyl-2-pyrrolidone(NMP), d-limonene) and multi component flammable solvent(gasoline and ethanol). For gelation of flammable solvents, commercially Known as Aerosil(equation omitted) 200 fumed silica and triethanolamine(TEA) were used as gelation agent dispersant. The analyses on properties of gel-like compounds was studied by gelation and viscosity test pH test, volatility test and differential scanning calorimetry(DSC) measurement. The experimental results indicate that gel-like compounds containing flammable solvents have pH stability, high viscosity, volatile organic compounds(VOC) control by the decrease of volatility and odor component generation, fluidity control etc. From the experimental values, it can be predicted that the safety in the working place is improved by manufacturing flammable solvents into gel-like compounds.

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.192-199
• /
• 2008

This paper is mainly concerned with a high frequency soft-switching PWM inverter suitable for consumer induction heating systems. The proposed system is composed of a soft switching chopper based boost PFC converter stage with passive snubber and phase shifted PWM controlled full bridge ZVZCS high frequency inverter stage. Its fundamental operating performances are illustrated and evaluated in the experimental results. Its effectiveness is substantially proved on the basis of the experimental results from a practical point of view.

• 한국실내디자인학회논문집
• /
• 제13권3호
• /
• pp.3-10
• /
• 2004

Modern society is indefinable and constantly changes like nature changes. It uses design to create new experiments and trend within social environment and culture. In the history of interior architecture and postmodernism, the Italian design movement of Archizoom, Studio Alchimia and Memphis are very important, and Andrea Branzi was the central figure of this design movement. His experimental and defiant works throughout this design movement produced design with combination, indefiniteness, sustentation, and reiteration. Designers must recreate themselves continually and need to have constant experimental spirit and attempts. From this point of view, the study on Andrea Branzi who led Italian design revolution with various experiments and attempts is valuable, and it will help to find the direction of design in this modern social and cultural environment.

• 한국재료학회지
• /
• 제23권8호
• /
• pp.462-468
• /
• 2013

We study and describe-from the point of view of the interactions of the adsorbed particles-three types of the adsorption isotherms, namely, Langmuir type adsorption isotherms, phase transition type adsorption isotherms, and adsorption limited type adsorption isotherms, which are observed by experiments. By introducing and using a one dimensional statistical occupancy model, we derived analytical adsorption isotherms for the no force, the attractive force, and the repulsive force exerted on the other adsorbed particles. Our derived adsorption isotherms qualitatively pretty well agree with the experimental results of the adsorption isotherms. To specify each adsorption type, Langmuir type adsorption is a phenomenon that occurs with no forces between the adsorbed particles, phase transition type adsorption is a phenomenon that occurs with the strong attractive forces between the adsorbed particles, and adsorption limited type adsorption is a phenomenon that occurs with the repulsive forces between the adsorbed particles. The theoretical analysis-only using fundamental thermodynamics and occupancy statistics though-qualitatively quite well explains the experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.509-513
• /
• 2013

There are so many types of construction equipment. Excavator is one of typical construction equipment which is working under the tough and severe environments. It's important for engineers to design CE components by the vibration durability point of view. Traditionally, two typical vibration durability methods to verify the durability of components. The first is experimental method which is using the vibration durability test bench. But experimental approach on vibration durability is needed a lot of cost and time. The second is analytical method which is using the vibration durability analysis such as Dirlik, Stainberg, Lalanne and others methodologies. The one of main advantages on vibration durability analysis can reduce the cost and time. We present a vibration durability analysis process and methodology on the guardrail system in excavator.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.47-55
• /
• 2012

본 논문에서는 객체의 모션 블러(motion blur)를 포함하고 있는 다중시점(multi-view) 영상을 이용하여 객체의 3차원 형상 복원시 영상을 효과적으로 디블러링(deblurring)하여 3차원 형상 복원의 정확도를 높이는 기법을 제안한다. 다중시점 영상의 디블러링 수행시 다중시점 영상 간의 기하학적 상관관계를 고려하여 보다 정확히 PSF (point spread function)를 구함으로써 결과적으로 보다 정확한 3차원 형상 복원을 수행할 있다. 제안하는 기법은 각각의 입력 영상에서 초기 2D PSF를 독립적으로 구한 후, 3차원 PSF의 후보를 각 입력 영상의 카메라 행렬에 의해 투영했을 때 이들에 전역적으로 가장 잘 부합하는 3D PSF를 탐색한다. 3D PSF는 방향과 밀도 성분으로 구성되며 이는 결국 3차원 공간에서의 물체의 움직임 궤적과 동일하다. 추정된 3D PSF는 각 영상으로 다시 투영되어 각 영상의 2D PSF로 추정되고, 이에 의해 각 영상의 디블러링을 수행한다. 본 논문에서 제안하는 기법을 이용하여 다중시점 영상 디블러링과 3차원 형상 복원을 수행한 결과, 단일 영상만을 이용하여 복원할 경우에 비하여 디블러링과 3차원 형상 복원 모두 현저히 개선된 결과를 확인할 수 있다.

• 음성과학
• /
• 제7권4호
• /
• pp.149-167
• /
• 2000

The purpose of this paper is to review the contribution made by some phoneticians including Si-gyung Chu, Du-bong Kim, Hyun-bae Choi, and Geuk-ro Lee in the early 20th century. It is known that the period can be characterized as the coexistence of traditional phonetics and modem phonetics. Si-gyung Chu well recognized the physical nature of speech sounds from the physiological point of view. Although Du-bong Kim adapted Chu's approach in some ways, he made some more detailed modifications in explaining the vocal organs. Hyun-bae Choi tried to explain the consonants and vowels systematically based on Western theories of phonetics. Finally, Geuk-ro Lee made the most significant contribution by introducing the experimental phonetics.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1562-1568
• /
• 2011

This paper is intended as an verification of moving load simulation techniques. The concern with dynamic problem of railway bridge caused by the moving train loads has been growing. Over the past few years, several studies have been made on dynamic stability of railway bridge analytically. But very few attempts have been made at experimental research. From the dynamic stability view point, the moving train loads simulation test is revolutionary idea. It can be replace restrictive filed test with new laboratory test. This study investigates minimum specifications of hardware and basic parameters. it is used 12m girder and high performance actuator for experimental verification.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.68-75
• /
• 2000

The incomplete penetration(IP) discontinuity in butt joint weld, which is detected during safety analysis of the steel bridge by nondestructive evaluation(NDE) method, is classified as unacceptable defect according to the NDE codes and standards. In fact, there are a little allowance in butt joint weld in the view point of design criterion, and also detected IP discontinuity should be classified and evaluated for the fatigue strength and residual life estimation. In this study, we performed fatigue test to evaluate the fatigue strength of high strength steel(SWS490A) containing IP discontinuities in various size, the results compared and classified according to the bridge construction standard specification which published by korea administration of construction and traffic. Experimental results could be used to evaluate and estimate the IP discontinuities considering different stress range in butt joint bridge weld during periodic safety inspection.