• 한국철도학회논문집
• /
• 제7권2호
• /
• pp.137-141
• /
• 2004

A series of filed tests have been performed to investigate the aerodynamic effects on platform of the railway station during the passage of train that can be unpleasant and even dangerous to the pedestrians. To assess the aerodynamic effects on the platform, two aerodynamic properties has been measured; one is the wind gust induced by the train and the other is the pressure pulses generated when the nose and the tail of train passes. To measure these aerodynamic properties during the train passage, an array of hot-wire type anemometers and several sets of pressure transducers have been used, respectively. This paper deals with the filed test on conventional railway at about 100km/h operational speed, in which total 34 measurements has been made at the Bugok station in Seoul-Busan line for Saemaul-ho and Mugungwha-ho train. The results showed dramatic differences in the aerodynamic features between the two trains that are supposed to originate from the contrasting nose shapes of the trains.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.179-189
• /
• 2006

Recently the electrostatic 2-axis MEMS stages have been fabricated f3r the purpose of an application to PSD (Probe-based Storage Device). However, all of the components (platform, comb electrodes, springs, anchors, etc.) in those stages are placed in-plane so that they have low areal efficiencies such as a few percentage, which is undesirable as data storage devices. In this paper, we present a novel structure of an electrostatic 2-axis MEMS stage that is characterized by having a large areal efficiency of about 25%. For obtaining large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. The structure and operational principle of the MEMS stage are described, followed by a design and analysis, the fabrication and measurement results. Experimental results show that the driving ranges of the fabricated stage along the x and y axis were 27$\mu$m, 38$\mu$m at the supplied voltages of 65V, 70V, respectively and the natural frequencies along x and y axis were 180Hz, 310Hz, respectively. The total size of the stage is about 5.9$\times$6.8mm$^2$ and the platform size is about 2.7$\times$3.6mm$^2$.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.495-501
• /
• 2014

본 논문에서는 IEEE 802.11p WAVE 모뎀을 위한 다이버시티 모뎀 구조를 제안하고 설계하였으며, 이를 실차에 장착하여 성능테스트를 수행하였다. 제안한 구조는 듀얼채널과 다이버시티 기능을 선택적으로 수행할 수 있으며, 선택적 안테나 다이버시티와 Maximum Ratio Combining (MRC) 다이버시티 기능 중하나를 선택하여 수신할 수 있다. 개발된 구조는 HDL로 설계되어 Xillinx Kintex7보드를 이용하여 실도로에서 실차에 장착하여 테스트를 수행하여 성능을 검증하였다. 실험결과 개발된 다이버시티 모뎀은 단일 채널 모뎀에 비하여 안정적인 통신 성공률을 유지할 수 있으며, 전송거리도 30%이상 향상됨을 확인하였다.

• Ocean Systems Engineering
• /
• 제8권3호
• /
• pp.329-343
• /
• 2018

The inclination of seabed profile (sloped seabed) is one of the known topographic features which can be observed at different seabed level in the large offshore basin. A mooring system connected between the platform and global seabed is an integral part of the floating structure which tries to keep the floating platform settled in its own position against hostile sea environment. This paper deals with an investigation of the motion responses of an FPSO platform moored on the sloped seabed under the combined action of wave, wind and current loads. A three-dimensional panel discretization method has been used to model the floating body. To introduce the connection of multi-segmented non-linear elastic catenary mooring cables with the sloped seabed, a quasi-static composite catenary model is employed. The model and analysis have been completed by using hydrodynamic diffraction code AQWA. Validation of the numerical model has been successfully carried out with an experimental work published in the latest literature. The analysis procedure in this study has been followed time domain analysis. The study involves an objective oriented investigation on platform motions, in order to identify the effects of the slopped seabed, the action of the wave, wind and current loads and the presence of riser system. In the end, an effective analysis has been performed to identify a stable mooring model in demand of reducing structural responses of the FPSO.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2006년도 Principles and Practice of Microarray for Biomedical Researchers
• /
• pp.78-78
• /
• 2006

Gene expression analysis can be performed by one-color (intensity-based) or two-color (ratio-based) microarray platforms depending on the specific applications and needs of the researcher. The traditional two-color approach is well founded from a historical and scientific standpoint, and the one-color approach, when paired with high quality microarrays and a robust workflow, offers additional flexibility in experimental design. Two of the major requirements of any microarray platform are system reproducibility, which provides the means for high confidence experiments and accurate comparison across multiple samples; and high sensitivity, for the detection of significant gene expression changes, including small fold changes across multiple gene sets. Each of these requirements is fulfilled by the Agilent One-color Gene Expression Platform as illustrated by the data included in this study. As a result, researchers have the ability to take advantage of the enhanced performance and sensitivity of Agilent's 60-mer oligonucleotide microarrays, and experience the first commercial microarray platform compatible with both one- and two-color detection.

• Structural Engineering and Mechanics
• /
• 제54권5호
• /
• pp.909-922
• /
• 2015

The dynamic response and the mooring line tension of a 1/75 scale model of spar-type platform for 2.5 MW floating offshore wind turbine subject to one-dimensional regular harmonic wave are investigated numerically and verified by experiment. The upper part of wind turbine which is composed of three rotor blades, hub and nacelle is modeled as a lumped mass the scale model and three mooring lines are pre-tensioned by means of linear springs. The coupled fluid-rigid body interaction is numerically simulated by a coupled FEM-cable dynamics code, while the experiment is performed in a wave tank with the specially-designed vision and data acquisition system. The time responses of surge, heave and pitch motions of the scale platform and the mooring line tensions are obtained numerically and the frequency domain-converted RAOs are compared with the experiment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2732-2748
• /
• 2021

In post-COVID-19 pandemic era, students' learning effects and experience may sharply decrease when teaching is transferred from offline to online. Several tools suitable for online teaching have been developed to guarantee and promote students' learning effects. However, they cannot fully consider teacher-student interaction in online teaching. To figure out this issue, this paper proposes integrated media platform-based virtual office hours implementation for online teaching. Specifically, an integrated media platform (IMP) is first constructed. Then, virtual office hours (VOH) is implemented based on the IMP, aiming at increasing student-teacher interactions. For evaluating the effectiveness of this scheme, 140 undergraduate students using IMP are divided into one control group and three experimental groups that respectively contain text, voice and video modes. The experiment results indicate that applying VOH in the IMP can improve students' online presence and test scores. Furthermore, students' participating modes during VOH implementation can largely affect their degree of presence, which can be well classified by using principal component analysis. The implication of this work is that IMP-based VOH is an effective and sustainable tool to be continuously implemented even when the COVID-19 pandemic period ends.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• 한국해양공학회지
• /
• 제36권3호
• /
• pp.153-160
• /
• 2022

Moored floating platforms have great potential in ocean engineering applications because a mooring system is necessary to keep the platform in station, which is directly related to the operational efficiency and safety of the platform. This paper briefly introduces the technical and operational details of an optical sensor for measuring the tension of mooring lines of a moored platform in waves. In order to check the performance of optical sensors, an experiment with a moored floating platform in waves is carried out in the wave tank at Changwon National University. The experiment is performed in regular waves and irregular waves with a semi-submersible and triangle platform. The performance of the optical sensor is confirmed by comparing the results of the tension of the mooring lines by the optical sensor and tension gauges. The maximum tension of the mooring lines is estimated to investigate the mooring dynamics due to the effect of the wave direction and wavelength in the regular waves. The significant value of the tension of mooring lines in various wave directions is estimated in the case of irregular waves. The results show that the optical sensor is effective in measuring the tension of the mooring lines.

• Journal of Information Processing Systems
• /
• 제19권2호
• /
• pp.139-148
• /
• 2023

Current food-traceability platforms suffer from problems such as inconsistent traceability standards, a lack of public credibility, and slow access to data. In this work, a combined code and identification method was designed that can achieve more secure product traceability using the dual anti-counterfeiting technology of a QR code and a hidden code. When the QR code is blurry, the hidden code can still be used to effectively identify food information. Based on this combined code, a food-safety traceability platform was developed. The platform follows unified encoding standards and provides standardized interfaces. Based on this innovation, the platform not only can serve individual food-traceability systems development, but also connect existing traceability systems. These will help to solve the problems such as non-standard traceability content, inconsistent processes, and incompatible system software. The experimental results show that the combined code has higher accuracy. The food-safety traceability platform based on the combined code improves the safety of the traceability process and the integrity of the traceability information. The innovation of this paper is invoking the combined code united the QR code's rapidity and the hidden code's reliability, developing a platform that uses a unified coding standard and provides a standardized interface to resolve the differences between multi-food-traceability systems. Among similar systems, it is the only one that has been connected to the national QR code identification platform. The project has made profits and has significant economic and social benefits.