• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.52-59
• /
• 2004

In this paper, the automatic system generation algorithm based on the element combination algorithm discussed in the first part of this paper for designing an arbitrary type of the automatic transmissions is proposed. The powertrain design software using these algorithms is developed. This automotive powertrain design software with user-friendly graphic user interface has two main modules. The first module, the automatic power flow generation module, is already discussed in the previous paper. The second module dealing with the automatic system generation algorithm is discussed in this paper. The power-flow simulation software fur the arbitrary type of powertrain is then developed. The simulation and experimental results of the vehicle equipped with two planetary gear type automatic transmission are compared to validate the proposed algorithms and developed software. The simulation results demonstrate the good agreement with the experimental results.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.50-59
• /
• 2011

In the current very deep submicron technology era, fault tolerant mechanisms perform an essential function to cope with the effects of soft errors. To evaluate the effectiveness of the fault tolerant mechanism, reliability engineers use simulated fault injections using either saboteur modules or mutants in the simulation model. However, the two methods suffer from both inefficiency in the simulation mechanism and difficulties with the experimental setups. To overcome these inefficiencies, we propose the Verilog-based simulated fault injection (VFI) technique. VFI has the following advantages. First, modification of the design model is unnecessary. Second, the fault injection simulation procedure is simple and efficient. Third, various types of fault injection experiments can be performed. To evaluate the effectiveness of the proposed methodology, we developed a VFI environment using the ICARUS Verilog Simulator. From the experimental results, we were able to qualitatively evaluate the reliability of the target simulation models and to assess the effectiveness of the employed fault-tolerance mechanisms.

• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.195-208
• /
• 1999

A computer simulation was carried out to investigate draft characteristics of Korean paddy field for obtaining the basic reference to the selection of optimum moldboard type suitable for Korean paddy field conditions. Cylindrical, cylindroidal, semihelical moldboard plows, and one type of oriental Janggi were used for simulation. A series of soil bin experiments was conducted to compare the experimental results with the predicted drafts from computer simulation using the cylindroidal moldboard plow. The computer model predicted draft force with 1~12% error at 12~16cm plowing depth which is the most conventional plowing depth in the rural area in Korea. Thus, the computer model was considered to be good enough for simulation. Due to the different plowing width of experimental plows, specific draft was selected for comparison by computer simulations. Specific draft of cylindrical moldboard plow was ranged from 3 to 6 N/$\textrm{cm}^2$ according to the soil conditions, plowing speed and plowing depth, 2.5~3.0 N/$\textrm{cm}^2$ for semihelical moldboard plow.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.1026-1035
• /
• 2003

A computer simulation method for investigating the form generation mechanism in the centerless infeed (plunge) grinding process is described. For a 3-D simulation model of form generation, contact points are assumed to be on least squares contact lines at the grinding wheel, regulating wheel, and work-rest blade. Using force and deflection analyses, the validity of this assumption is shown. Based on the 2-D simulation model developed in the previous work and the least squares contact line assumption, a 3-D model is presented. To validate this model, simulation results were compared with the experimental works. The experiments and computer simulations were carried out using three types of cylindrical workpiece shapes with varying flat length. The experimental results agree well with the simulation. It can be seen that the effect of flat end propagated to the opposite end through workpiece reorientation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.5
• /
• pp.398-407
• /
• 2002

An experimental and analytical study was made on the heat transfer characteristics of one small (150 W), two medium (60 and 1,500 W, respectively) and two large (7,500and 100,000 W) two-phase loop thermosyphons (TLT), and the results from the experiments were used to see if a computer simulation code alone for such TLT heat transfer systems would give any meaningful quantitative results without being accompanied with some benchmark experimental verification. Two simulation methods were used for the analysis of the systems, i.e., the lumped and the sectorial thermal resistance methods. The study clearly shows that the computer simulation for the three TLTs can predict the most cases of the affecting parameters involved, provided that correct empirical correlations are used. To do so, however, the interior temperature distribution had to be verified by experiment.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.31-36
• /
• 2001

Optimal operation in chromatography is needed to save operation time and the solvent used in multiple chromatographic runs. To this end, many simulation studies of chromatography process have been performed. The relationship between the distribution coefficient and the ionic strength is important in gradient elution ion chromatography. Experimental runs and computer simulations were carried out under linear gradient elution condition in order to compare the experiments and the simulation. Experiments were performed with formic acid under isocratic conditions to determine the simulation equation parameters. Computer simulation was based on three equations which related distribution with ionic strength as follows; K=${\alpha}$I(sup)-${\beta}$, K=A+BI+Cl$^2$and K=y(sub)0+A$_1$$.$e(sup)(-I/m$_1$). The effects of gradient slope on the chromatograms are discussed, and good agreement between the experimental and the simulated results is shown.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.2
• /
• pp.135-140
• /
• 2015

It is an important thing for a designer to simulate and predict the performance of a spindle and a rotary table. In addition to the general performance such as static stiffness, the error motion performance information is beneficial to the designer in many cases. However for an aerostatic bearing the fluid film physical status should be calculated in order to simulate those performances and the calculation time is another obstacle for a simple performance simulation. In this paper the investigation on experiment and simulation is performed in order to find a more effective simulation method for the rotational error motion.

• Transactions of Materials Processing
• /
• v.10 no.5
• /
• pp.373-382
• /
• 2001

Die design by computer simulation has some advantages compared with the conventional method which has performed by designer's experiences and trials and errors. The die filling and solidification process of thixoforming process were simulated by MAGMAsoft/thixo module. Furthermore, the die design for thixoforming was performed with the various geometry shape. The effect of designed gate dimension on filling phenomenon was estimated by filling simulation. The calculated results was compared with experimental data. The free surface phenomenon obtained by experiment have good agreement with computer simulation results. The solidification effect much as prosity and shrinkage for designed semi-solid forging die had been predicted by computer simulation. The designed die for semi-solid forging had been applied to produce of the frame part which is used to airconditious system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.1
• /
• pp.30-38
• /
• 2003

The measurement on the working gas flow in the closed cycle diesel engine is insufficient to Identify its operating condition because of lack of sensors available. For this reason, the determination of optimum operating condition and controller parameters requires heavy experimental efforts. A simulation program is developed to minimize the experimental efforts. For the development of the simulation program, mathematical models are derived based on the physical laws and linear regression. The validity of the simulation program is demonstrated using the measured data of the closed cycle diesel engine.

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1606-1618
• /
• 2017

The explosion effect of computer graphics Visual Effects(VFX) used in films and animations is an important element that determines the completeness of the film, and its usage is getting extended. The realistic explosion effect of VFX should be made according to observations and analysis of various factors of actual explosion in real world. This experimental research would suggest the efficient production guideline for the technical characteristics of underwater explosion of VFX. For this research process, first, the comparison of actual explosion and VFX explosion effect, classification of actual explosion, and characteristics of underwater explosion effect will be addressed. Second, based on the literature reviews, the four steps of experimental production analysis tool will be derived. Third, the experimental research will be processed in along with technical factors four steps of the underwater explosion effect, (1)realistic creation and emission of fluid, (2)fluid expansion control by water pressure, (3)bubble effect, and (4)motion of bubble & dissipation of fluid. The effective method of fluid simulation production will be verified through experimental studies based on the characteristics of the actual explosion process. This experimental study suggested the VFX production technique is expected to be used as the basic data for related research field.