• The Mathematical Education
• /
• v.56 no.3
• /
• pp.281-300
• /
• 2017

This study analyzed the difficulties of middle school students in computer simulation of the law of large numbers through eye movement analysis. Some students did not attend to the simulation results and could not make meaningful inferences. It is observed that students keep the existing concept even though they observe the simulation results which are inconsistent with the misconceptions they have. Since probabilistic intuition influence student's thinking very strongly, it is necessary to design a task that allows students to clearly recognize the difference between their erroneous intuitions and simulation results. In addition, we could confirm through eye movements analysis that students could not make meaningful observations and inferences if too much reasoning was needed even though the simulation included a rich context. It is necessary to use visual representations such as graphs to provide immediate feedback to students, to encourage students to attend to the results in a certain intentional way to discover the underlying mathematical structure rather than simply presenting experimental data. Some students focused their attention on the visually salient feature of the experimental results and have made incorrect conclusion. The simulation should be designed so that the patterns of the experimental results that the student must discover are not visually distorted and allow the students to perform a sufficient number of simulations. Based on the results of this study, we suggested that cumulative relative frequency graph showing multiple results at the same time, and the term 'generally tends to get closer' should be used in learning of the law of large numbers. In addition, it was confirmed that eye-tracking method is a useful tool for analyzing interaction in technology-based probabilistic learning.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.18 no.1
• /
• pp.111-119
• /
• 2012

Purpose: The purpose of this study was to identify the effects on knowledge and performance confidence of nursing students in the emergency care of patients with dyspnea after simulation education using a human simulator. Method: The research design was a nonequivalent control group pretest-posttest design. For the experimental group the human simulator was used to provide simulation. Also included were base learning with audio-visual material, explanations about simulation, using SimMan for human simulation, and debriefing. Pre and post-tests were conducted to compare differences in knowledge and performance confidence. Result: The (t=3.83, p<.000) than the control group. For the experimental group, the differences in pretest-posttest scores for knowledge (t=2.30, p=.025) and performance confidence (t=4.28, p<.000) were significantly higher than the experimental group had significantly higher scores for knowledge (t=3.03, p=.004) and performance confidence (t=3.83, p<.001knowledge (t=2.30, p=.025) and performance confidence (t=4.28, p<.000) were significantly higher than the control group. Conclusion: The results of this study indicate that for student nurses, knowledge and performance confidence in emergency care of patients with dyspnea improve with human simulator simulation education. Further study is suggested to develop other scenarios for emergency care and identify the effects of critical thinking and satisfaction when using human simulator simulation education.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1055-1079
• /
• 2014

Substructure shake table testing is a class of real-time hybrid simulation (RTHS). It combines shake table tests of substructures with real-time computational simulation of the remaining part of the structure to assess dynamic response of the entire structure. Unlike in the conventional hybrid simulation, substructure shake table testing imposes acceleration compatibilities at substructure boundaries. However, acceleration tracking of shake tables is extremely challenging, and it is not possible to produce perfect acceleration tracking without time delay. If responses of the experimental substructure have high correlation with ground accelerations, response errors are inevitably induced by the erroneous input acceleration. Feeding the erroneous responses into the RTHS procedure will deteriorate the simulation results. This study presents a set of techniques to enable reliable substructure shake table testing. The developed techniques include compensation techniques for errors induced by imperfect input acceleration of shake tables, model-based actuator delay compensation with state observer, and force correction to eliminate process and measurement noises. These techniques are experimentally investigated through RTHS using a uni-axial shake table and three-story steel frame structure at the Johns Hopkins University. The simulation results showed that substructure shake table testing with the developed compensation techniques provides an accurate and reliable means to simulate the dynamic responses of the entire structure under earthquake excitations.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.232-237
• /
• 2015

Purpose: In Korea, wheat is dried using circulating cross-flow grain dryers. However, there is no research on wheat drying which can be utilized for the dryers. Therefore, this study developed and evaluated a simulation of the circulating cross-flow dryer, and examined the effects of various factors on drying performance. Methods: The simulation program was developed using drying models and was evaluated against wheat-drying experiments with a dryer having a 30-ton capacity. The influence of drying temperature, air volume, and grain falling rate on drying performance were examined through the simulation. Results: The experimental results validated the simulation program by showing the same root mean square error (RMSE) for moisture content (0.286%) and drying rate (0.056%/h) in both the experimental data and the simulation values. The appropriate wheat-drying parameter values, considering drying conditions, were determined to be $50^{\circ}C$ for drying temperature, $500m^3/min$ for air volume, and a grain falling rate of $36.0m^3/h$. Conclusions: The developed simulation program for circulating cross-flow dryers analyzed the influences of performance factors such as drying temperature, air volume, and falling rate on drying performance.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.421-427
• /
• 2020

The aim of this study was to examine the impacts of pre-briefing using structured video simulations in the pre-hospital trauma care simulation-based education on simulation immersion, simulation confidence, and simulation satisfaction. For both the experimental group and the control group, orientations were conducted on the simulation environment. Subsequently, the experimental group watched a video of about 8 minutes, similar to the scenario situation, in which the goal and result of the training were presented. The control group, on the other hand, conducted a classical way of orientation related to the scenario during the same time period. In addition, the experimental group and the control group underwent simulation practice in the same situation for 12 minutes, and debriefing was performed for 40 minutes by the same research assistant. Afterwards, we measured the simulation immersion, confidence, and satisfaction of the participants. Data were analyzed using χ² and independent t-test using the SPSS 22.0 program. It was found that the experimental group that conducted the pre-briefing using video had higher immersion and confidence than the control group. On the other hand, satisfaction was not significantly different between the two groups. The results indicate that pre-briefing using structured video was an effective educational method to increase simulation immersion and simulation confidence.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.319-320
• /
• 2002

Numerical simulation of chip formation during high speed machining requires knowing the friction at tool/chip interface. This parameter is hardly identified and generally the loadings (temperature, force) during the identification are not similar to those encountered during machining. Thus, Coulomb friction identified with pin-on-disc device is often used to conduct numerical simulation. The used of this technique cannot leads to good numerical results of chip formation compared to the experimental tests especially in the case of low uncut chip thickness. In this contribution, we propose a new method to evaluate the friction at tool/chip interface. In fact several Coulomb friction parameters are identified corresponding to several parts of the cutting tool. Experimental tests have been conducted allowed us to determinate both the level and the distribution of the Coulomb friction. Experimental results are also compared to the results of orthogonal cutting simulation. We show that this technique allows predicting accuracy results of chip formation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.379-381
• /
• 2009

The simulation model for metal-supported Solid Oxide Fuel Cell(SOFC) is developed in this study. Open circuit voltage is calculated using Nernst equation and Gibbs free energy is required by thermodynamic. The exchange current densities are compared with experimental results since exchange current density is most effective factor for the activation loss. Liu's study is used for the exchange current density of cathode, BSCF, and Koide's result is applied for the exchange current density of anode, Ni/YSZ. For the ohmic loss, ionic conductivity of YSZ is described from Kilner's mode and the data are compared with Wanzenberg's experimental data. Diffusivity is an important factor for the mass transfer through the porous medium. Both binary diffusion and Knudsen diffusion are considered as the diffusion mechanism. For validation, simulation results at this work are compared with our experimental results.

• Steel and Composite Structures
• /
• v.15 no.6
• /
• pp.645-658
• /
• 2013

The objective of the study is to predict the moment anchorage capacity of the concrete filled steel box (CFSB) as footing by using the 3D finite element program CAMUI developed by authors' laboratory. The steel box is filled with concrete and concrete filled steel tube (CFT) column is inserted in the box. Numerical simulation of the experimental specimens was carried out after introducing the new constitutive model for post peak behavior of concrete in compression under confinement. The experimental program was conducted to verify the reliability of the simulation results by the FE program. The simulated peak loads agree reasonably with the experimental ones and was controlled by concrete crushing near the column. After confirming the reliability of the FEM simulation, effects of different parameters on the moment anchorage capacity of concrete filled steel box footing were clarified by conducting numerically parametric study.

• Wind and Structures
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2004

Numerical simulation of flow past two-dimensional hill and valley is presented. Application of three turbulence models - the standard and modified (Kato-Launder) $k-{\varepsilon}$ models and standard $k-{\omega}$ model - is discussed. The computational methodology is briefly described. The mean velocity and turbulence intensity profiles, obtained from numerical simulations of flow past the hill, are compared with the experimental data acquired in a boundary-layer wind tunnel at Colorado State University. The mean velocity, turbulence kinetic energy and Reynolds shear stress profiles from numerical simulations of flow past the valley are compared with published experimental data. Overall, the results of simulations employing the standard $k-{\varepsilon}$ model were found to be in a better agreement with the experimental data than those obtained using the modified $k-{\varepsilon}$ model and the $k-{\omega}$ model.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.8
• /
• pp.664-670
• /
• 2002

A heat sink (HS) system using heat pipes for electronics systems was studied. The experimental results indicate that a cooling capacity of up to 150w at an overall temperature difference of $50^{\circ}C$ can be attainable. The heat sink design program also showed that a computer simulation can predict the most of the parameters involved. To do so, however, the interior temperature distribution had to be verified by experimental results. The current simulation results were close to the experimental results in acceptable range. The simulation study showed that the design program can be a good tool to predict the effects of various parameters involved in the optimum design of the heat sink.