• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.87-92
• /
• 2002

By using the signal error test, model structure of total antilock braking system consisting of electromagnetic system and hydraulic system is determined as 9th order system. For determining parameters of the ABS, using time discrete model of parametric method, parameters in time discrete model are searched by least square method. By bilinear transform, we have found the model of ABS in s domain. Afterward, experimental output data is compared with simulated output data by MATLAB haying identified parameter. As the result, experimental data is agreed with simulated data very well.

• International Journal of Concrete Structures and Materials
• /
• v.5 no.1
• /
• pp.57-64
• /
• 2011

An extensive database has been constructed of reinforced concrete (RC) beam-column connection tests subjected to cyclic lateral loading. All cases within the database experienced joint shear failure, either in conjunction with or without yielding of longitudinal beam reinforcement. Using the experimental database, envelope curves of joint shear stress vs. joint shear strain behavior have been created by connecting key points such as cracking, yielding, and peak loading. Various prediction approaches for RC joint shear behavior are discussed using the constructed experimental database. RC joint shear strength and deformation models are first presented using the database in conjunction with a Bayesian parameter estimation method, and then a complete model applicable to the full range of RC joint shear behavior is suggested. An RC joint shear prediction model following a U.S. standard is next summarized and evaluated. Finally, a particular joint shear prediction model using basic joint shear resistance mechanisms is described and for the first time critically assessed.

• Computers and Concrete
• /
• v.19 no.4
• /
• pp.375-385
• /
• 2017

In the present paper experimental and numerical analysis of hook-ended steel fiber reinforced concrete is carried out. The experimental tests are performed on notched beams loaded in 3-point bending using fiber volume fractions up to 1.5%. The numerical analysis of fiber reinforced concrete beams is performed at meso scale. The concrete is discretized with 3D solid finite elements and microplane model is used as a constitutive law. The fibers are modelled by randomly generated 1D truss finite elements, which are connected with concrete matrix by discrete bond-slip relationship. It is demonstrated that the presented approach, which is based on the modelling of concrete matrix using microplane model, able to realistically replicate experimental results. In all investigated cases failure is due to the pull-out of fibers. It is shown that with increase of volume content of fibers the effective bond strength and slip capacity of fibers decreases.

• Journal of Korean Society for Quality Management
• /
• v.7 no.2
• /
• pp.22-28
• /
• 1979

The problem considered in this paper is to select the vital factor effect to the product quality through the experimental design and analysis of response surface, so as to control the quality improvement of industrial product. In this time, even through the mathematical model is unknown it could be applicable to control the quality of industrial products and to determine optimum operating condition for many technical fields, particulary, for industrial manufacturing process. When a set of data is available from an experimental design, it is often of interest 1:0 fit polynominal repression model in independent variables (eg, time, temperature, pressure, etc) the optimize the response variable (eg. yield, strength etc). This paper proposes a method known to obtain the optimum operating condition, and how to find the condition by using table of orthogonal array experiments, and optimization methodology of statistical model. A criterion can be applied determining to optimum operating conditions in manufacturing industry and improving the fit of response surface which may be used for prediction of responses and quality control of industrial products.

• Transactions of Materials Processing
• /
• v.5 no.4
• /
• pp.320-326
• /
• 1996

Based upon experimental observations the authors have shown in the previous studies that the orientations of orthotropy axes of anisotropic sheet metals are subjected to change during tensile loading at angles to the rolling direction. To predict the rotations of orthotropy axes under general plane stress conditions, a simple phenomenological model is proposed which accounts for the effect of work hardening. Predictions from the model are compared against the experiments for 0%, 3%, and 6% of 1st tensile prestrains in the rolling direction and 2nd tensile prestrains at 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$ to the 1st prestrains axis. The model showed good agreements with the experimental observations. A new interpretation of the experimental data is suggested regarding the rotations of orthotropy axes.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.137-142
• /
• 2009

One of the most important aspects of conducting this microbial risk assessment (MRA) is determining the model in microbial behaviors in food systems. However, to fully these modeling, large expenditures or newly laboratory experiments will be spent to do it. To overcome these problems, it has to be considered to develop the new strategies that can be used data in the published literatures. This study is to show whether or not the data set from the published experimental data has more value for modeling for MRA. To illustrate this suggestion, as example of data set, 4 published Salmonella survival in Cheddar cheese reports were used. Finally, using the GInaFiT tool, survival was modeled by nonlinear polynomial regression model describing the effect of temperature on Weibull model parameters. This model used data in the literatures is useful in describing behavior of Salmonella during different time and temperature conditions of cheese ripening.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.1
• /
• pp.43-51
• /
• 1987

In this paper, a state-space model of the burnthrough point control system of an industrial sintering process is derived. The model is then used in designing a self-tuning controller which consists of the receding horizon control law and a least-squares prediction algorithm with covariance resetting. By applying this controller to POSCO IV sintering process, satisfactory experimental results have been obtained. This paper presents some of these real-time experimental results and analyzes the control performance through productivity, operation indices, quality, sintered material composition, etc. From these experimental results and simulation results, the validity of the model can be observed. Moreover, the properties of the controller, e.g. stability, steady-state error, are shown based on the model.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.5
• /
• pp.116-122
• /
• 2008

In order to establish automation or optimization of the machining process, predictions of the forces in machining are often needed. A new model fur farces in milling with the experimental model based on the specific cutting pressure and the Oxley's predictive machining theory has been developed and is presented in this paper. The specific cutting pressure is calculated according to the definition of the 3 dimensional cutting forces suggested by Oxley and some preliminary milling experiments. Using the model, the average cutting forces and force variation against cutter rotation in milling can be predicted. Milling experimental tests are conducted to verify the model and the predictive results agree well with the experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.375-378
• /
• 2005

Voice Coil Motor is used linear motion actuator system that require precision positioning control. In order to control precision positioning of voice coil motor, Mathematical model of voice coil motor is needed. Mathematical model is obtained by combining voice coil motor's equation of motion with the equation of circuit and characteristic of voice coil motor. The induced model can predict output displacement according to duty ratio and amplitude. The model is verified by experimental test. Simulated results have tracking errors of less than 10 percent of experimental results.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.70-74
• /
• 2008

It is important to reduce the vibration and noise of submarines and ships. For the purpose of noise reduction, various researches are actively being conducted on the employment of complex structures. However, in the case of numerical analysis for complex structures with damping materials, substantial errors can be generated by the absence of an exact damping model. Thus experimental model analysis is necessary for the verification of a numerical analysis for complex structures. In this research, vibration experiments are conducted in order to ascertain the vibration properties of cantilever beam attached damping materials. First, an initial value is obtained by using a direct linear method. Next, based on this initial value, the exact modal parameters of the cantilever beam are obtained by using the Newton-Raphson method.