• Solar Energy
• /
• v.8 no.2
• /
• pp.73-76
• /
• 1988

Thick films based on the mature crystalline silicon technology are expected to exhibit eversmaller cost reduction. The thin-film-based technology is, however, expected to exhibit a much sharper drop in cost as it develops. In this report, technology and recent R & D of thin film solar cell, such as amorphous silicon, cadnium telluride, copper indium diselenide and gallium arsenide, are described. Perspectives of world photovoltaic market and solar cell price are also described.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.871-880
• /
• 1999

The main purpose of queueing theory is to find the optimal solution for maintaining systems such as service facilities. Analyzing the overfolw process provides an important information for the solution in queueing systems with finite capacity. In this thesis we approximate the expected time until the first overflow in M/G/1/K/N queueing systems. Results will be applied to approximate the expected time until the first reduction of source population system. Simulation results show that our approximation is applicable to real situations.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.574-579
• /
• 2011

In this study, we suggested a design modification method to reduce the vibration of an air conditioner for railway vehicles and increase the durability of its pipe lines. Through experimental vibrational mode analyses and structural modifications on the air conditioning system, vibration reduction scheme was suggested and evaluated its effectiveness by empirical modal analysis. The derived design idea was applied to a real air conditioning system and the expected improvement was obtained.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.8 no.1
• /
• pp.57-66
• /
• 2000

Benefit-cost analysis is one of key elements of feasibility study on a large scale investment for transportation infrastructure improvements. Benefit-cost analysis requires measuring expected benefits after the investment is completed. Reduction of delays is the major source for the benefit among other measurable benefits. Measurement methods for delays reduction have been reviewed and two methods were recommended for passenger delay and aircraft operation delay. Using these method, the effects of Cheju International Airport Improvement Projects were evaluated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.402-403
• /
• 2009

A variety of power reduction technologies is introduced and the benefits of the technologies are discussed. PenTile$^{(R)}$ DBLC (Dynamic Brightness LED Control) combined with SABC (Sensor-Based Adaptive Brightness Control) enables to achieve the average LED power consumption to one third. The panel power reduction of 25% can be achieved with low power driving technology, ALS (Active Level Shifter). MIP (Memory In Pixel) is expected to be useful in transflective display because the whole display area can be utilized in reflective mode with power consumption of 1mW.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.228-236
• /
• 2011

Since most Green House Gases (GHGs) and air pollutants are generated from the same sources, it will be cost-effective to develop a GHGs reduction plan in combination with simultaneous removal of air pollutants. However, effects on air pollutants reduction according to implementing any GHG abatement plans have been rarely studied. Reflecting simultaneous removal of air pollutants along with the GHGs emission reduction, this study investigated relative cost effectiveness among GHGs reduction action plans in Busan Metropolitan City. We employed the Data Envelopment Analysis (DEA), a methodology that evaluates relative efficiency of decision-making units (DMUs) producing multiple outputs with multiple inputs, for the investigation. Assigning each GHGs reduction action plan to a DMU, implementation cost of each GHGs reduction action plan to an input, and reduction potential of GHGs and air pollutants by each GHGs reduction action plan to an output, we calculated efficiency scores for each GHGs reduction action plan. When the simultaneous removal of air pollutants with the GHGs reduction were considered, green house supply-insulation improvement and intelligent transportation system (ITS) projects had high efficiency scores for cost-positive action plans. For cost-negative action plans, green start network formation and running, and daily car use control program had high efficiency scores. When only the GHGs reduction was considered, project priority orders based on efficiency scores were somewhat different from those when both the removal of air pollutants and GHGs reduction were considered at the same time. The expected action plan priority difference is attributed to great difference of air pollutants reduction potential according to types of energy sources to be reduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.175-180
• /
• 2007

This paper presents a case study on blasting vibration reduction in NATM(New Australian Tunnelling Method) tunnel construction carried out under a congested residential area. In NATM tunnel constructions, blasting is an essential process, thus vibration phenomenon is inevitable. Therefore, the vibration reduction was tried to avoid expected complaints from the public living in the area. Test blastings were performed to get the constants for an estimation formula of vibration velocity. Then the influence area was approximated using the estimation formula, and construction methods for the vibration reduction were sought based on the results.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.601-610
• /
• 1993

With the purpose of labour reduction in tea plucking operation with portable type machine, the influence of frame angles and tea leaves weight on the grasping forces of each finger were investigated. At the measurement of the grasping force of each finger except for thumb, grip strength dynamometers were attached at the grasping position of the frame instead of handle grips. A series of measurement was carried out changing frame angles of the tea plucking machine and the weight of tea leaves. With the obtained results of the experiments , the influences of the frame angles and the weight of the tea leaves on the grasping forces of each finger were analyzed. Some reasonable suggestions for the labour reduction in the tea plucking operation with portable type machine were obtained in the aspect of normalizing the balance of the grasping force on each finger and these suggestions are expected to contribute the labour reduction of the tea plucking operation.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.67-73
• /
• 2012

PURPOSES : This study deals with the effects on the installation of RLC(Red Light Camera). The objective is to analyze the effects of accident reduction after the installation of RLC. METHODS : In pursuing the above, the study uses the 703 accident data occurred at the 64 intersections which RLC are installed or not installed. RESULTS : The main results are as follows. First, Poisson RLC accident model developed in this study is analyzed to be statistically significant. Second, using the above developed model, 33 intersections among 40 intersections are predicted to have the decreasing effects of accidents after the installation of RLC. Finally, the reduction effects are analyzed to be affected by ADT and the number of left-turn lane. CONCLUSIONS : This study is expected to improve the efficiency of RLC and to help in decision-making of RLC installation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.17-23
• /
• 2004

The effects of refining consistency and plate gap on the specific energy consumption and physical properties of liner were investigated. Higher refining consistency and narrower plate gap brought about the reduction of specific energy consumption to decrease the freeness. Refining consistency and plate gap did not affect the bulk, Taber stiffness and compression index. The reduction of freeness and/or the increase of specific energy consumption caused the decrease of bulk and Taber stiffness, but increased the compression index. The effect of grammage on bulk was not observed, but Taber stiffness and compression index were increased with grammage. The bulk was decreased with the reduction of freeness rapidly at the above 400 mL CSF, and then levelled off. It is expected that the reduction of energy consumption could be obtained from the application of higher refining consistency and narrower plate gap during refining.