• Design & Manufacturing
• /
• 제12권1호
• /
• pp.26-30
• /
• 2018

The aluminum chassis drive gear manufacturing process improvement has been very effective in both technical and economic aspects. Technology for Shear mold design technology, mold material selection and processing technology, and press molding technology has improved greatly overall. In the meantime, it is necessary to clarify the causes of defects that occur frequently due to lack of technology, Based on this, it is meaningful that it has secured the ability to respond to new product development and molding in the future. By applying these technologies, we plan to expand not only the drive gear chassis, but also various types of press forming such as frame, handle, various fastening parts of system window. In addition, the ability to develop precision products in the future is expected to become a driving force in further enhancing the competitiveness of companies.

• Applied Microscopy
• /
• 제41권1호
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• 산업기술연구
• /
• 제32권A호
• /
• pp.57-64
• /
• 2012

In order to examine the tailorability of advanced sewage treatment of a separated sewer pipe, we observed the quality of leaked water in a reactor. A2C affiliation and MBR affiliation decreased by over 78% in cases of BOD, COD, and SS. SBR affiliation decreased by 79.1% in a case of T-N. Overall, the efficiency of T-N on the above affiliations was low. SS had the high efficiency in MBR affiliation. In the end, examination of water quality improvement showed that the quality was improved from 20% to 90%; hence, it is expected that this treatment can protect the water resources of the Hongcheon River and makes it easier to use the water of the river.

• 기술사
• /
• 제30권5호
• /
• pp.82-95
• /
• 1997

A Study of Improvement in Reactor Thermal Power Measurement Method using Kalman Filter. The objectives of the safety analysis of nuclear power plants are to maintain the surface temperature of fuel and fuel cladding within limit value in case of Loss of Coolant accident (LOCA) so that it ensures the safety and reliability of nuclear power plants. The new technique evaluating the reactor power and improvement of existing plant system increase the safety margin of nuclear power plant operation, and accordingly, economic effect will be anticipated. Hereby, 1 would like to introduce reactor power measurement method using Kalman filter that enables to calculate the reactor power more precisely combining the parameters, for example, turbine output as the 1 st stage pressure of high pressure turbine, and reactor power using energy equilibrium relation. It is expected that the new technique will enhance the accuracy of measurement of reactor power and maintain the reliability of nuclear power operation by increasing operational safety margin, and gain the economic benefit

• 한국정보통신학회논문지
• /
• 제2권1호
• /
• pp.19-26
• /
• 1998

본 논문에서는 추적 성능 개선을 위해 기존의 신경망 제어기에 PID제어기를 직렬로 연결하여 시뮬레이션 결과를 고찰했다. 추적 성능을 평가하기 위해 신경망모델은 2계층으로 구성하고 Widrow-Hoff델타 규칙을 이용하여 예측 오차가 최소화되도록 정규적인 동특성을 학습하였다. 이 학습 결과, 기존의 신경망제어기의 경우보다 PID를 연결하였을 경우가 추적 성능이 다소 개선되었음을 확인했으며, 251샘플에서 추적할 플랜트 파라메터가 시변인 경우에도 빠른 속도로 수렴되는 결과를 얻었다.

• 한국실내디자인학회논문집
• /
• 제9호
• /
• pp.139-146
• /
• 1996

The purpose of this study was to examine the conditions of , and needs for improvement in the University professor`s office. To fulfill this task, the way of using office environment, attitudes for work environment intentions and features to improve, and preferred characteristics were examined and scrutinized. The data for this study were collected through a questionnaire survey and analyzed with SAS Package software. 279 professor at Yonsei University participated in the study. The detailed aspects of conditions, various ways and their priorities for improvement of the environment were described. These results are expected to be used as basis for the design of office space as it applies to facility management perspectives-which has not been implemented in Korea.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.586-592
• /
• 2004

In this study, the failure analysis of a decanter is carried out and the methods of performance improvement are presented. The decanter is a centrifugal separator that is used to separate water and solids from municipal and industrial sludge. Therefore, the decanter should be designed to improve the dewatering of sludge. Besides high performance, the decanter should guarantee its life time under a severe using condition. For theses reasons, the failure analysis and performance improvement of the decanter are studied. It is found from this study that the failure is caused by mass unbalance, wear, clogging or crack. If these failure causes are prevented, the life time as well as the performance is expected to be improved.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권4호
• /
• pp.363-370
• /
• 1996

The effect of breeding length of sire on genetic progress was examined in the Holstein dairy cattle population in Japan. Genetic progress was extimated by gene flow method. Breeding length of sires directly influences the replacement rates of sires and the selection intensity of sires because there are a fixed number of progeny tested young bulls per year. As breeding length of sires increased, rate of gene flow decreased and average proportions of genes deriving from selected animals had lower asymptotic values. When breeding length was short, average proportions of genes required a longer period to converge to asymptotic values. Changes of Rcow-sire's(sire to breed recorded cows) and Ncow-sire's(sire to breed non recorded cows) breeding length influenced not only transmission of their genes but also that of genes derived from all other selected animals. Irrespective of whether the discount rate was assumed to be 0 or 6%, longer term (${\geq}$ 20 years) expected total genetic improvement was maximized by a sire breeding length of five years. For shorter term assessment(10 years), genetic improvement was maximized by a sire breeding length of three years. There was a linear increase in the contribution of the sire to bulls pathway to the total genetic improvement, with increase in the term of assessment.

• 정보관리학회지
• /
• 제37권1호
• /
• pp.197-220
• /
• 2020

최근 한국연구재단에서는 학술지평가에 KCI 인용지수를 반영하려는 계획을 발표하였다. 원칙적으로 학술지 평가는 다양한 지표를 통해서 개별 학술지의 상황과 특성을 최대한 반영할 수 있어야 한다. 이 연구에서는 예고된 학술지 인용지수 평가방안을 검토하여 세 가지 개선안을 제안하였다. 첫 번째 개선안은 인용지수로 5년 IF를 추가로 고려하는 것이고, 두 번째 개선안은 순위를 산출하는 범주 수준을 융통성 있게 선택하게 허용하는 것이며, 세 번째 개선안은 두 방법을 함께 적용하는 것이다. 이 연구에서 제안한 개선안은 KCI 학술지 평가의 부작용을 최소화하는데 기여할 것으로 기대된다.

• 대한통합의학회지
• /
• 제2권2호
• /
• pp.1-12
• /
• 2014

Purpose : The purpose of this study was to investigate the effect that the academic achievement of the students about the evidence based learning investigates the learning utility value about and the request. Method : The agreement of college students explaining the purpose of research for 12 weeks against 17 students and investigate through a questionnaire. The level of academic achievement according to the sex and claim showed a characteristic with a percentage. An utility investigate the descriptive epidemiologic characteristic about the class of the evidence based learning. Result : The most of college students the level of academic achievement and requests the expected grade of the students about the evidence based learning wanted the 'high' grade of 9 persons, 'middle' grade of 8 persons in the part and the expectation for the class taken so much was high(p<.05). There was the significant different in the utility aspect in the need of the evidence based learning, homework solution, learning synergy effect improvement, and reference search ability improvement(p<.05). Conclusion : These finding revealed that the evidence based learning the satisfaction with class raises the improvement and utility value, and provided the need and the has to develop the educational model which the college students contentment raises an improvement after this opportunity for the new recognition.