• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.65.2-65.2
• /
• 2005

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2001

This paper presents further investigation into the effect of over-expansion cycle in a spark-ignition engine. On the basis of the results obtained in previous studies, several combinations of late-closing (LC) of intake valve and expansion ratio were tested using a single-cylinder production engine. A large volume of intake capacity was inserted into the intake manifold to simulate multi-cylinder engines. With the large capacity volume, LC can decrease the pumping loss and then increase the mechanical efficiency. Increasing the expansion ratio from 11 to 23.9 with LC application can produce about 13% improvement of thermal efficiency which was suggested to be caused by the increased cycle efficiency. The decrease of compression ratio from 11 to 5.5 gives little effect on the thermal efficiency if the expansion ratio could be kept constant. Thus, the expansion ratio is revealed to be a determining factor for cycle efficiency, while compression ratio is no more important, which suggests the usefulness of controlling the intake charge with intake valve closure timing. These were successfully explained by simple thermodynamic calculation and thus the mechanism could be verified by the estimation.

• Health Policy and Management
• /
• v.33 no.3
• /
• pp.325-337
• /
• 2023

Background: While there are many studies estimating the effects of private health insurance on various types of health care utilization, few have examined how such effects change in conjunction with important policy reforms in national health insurance (NHI). This study examined how the effect of private health insurance (supplemental and fixed cash benefit) on high-cost outpatient imaging test utilization changed following the expansion of magnetic resonance imaging (MRI) coverage in 2018, which is a key example of the NHI benefit expansion policy in recent years. Methods: Data from the 2017 and 2019 Korea Health Panel Survey, which contained information about healthcare utilization before and after the expansion of MRI coverage in 2018, were used. The incremental effect of private health insurance on high-cost outpatient imaging test utilization for each period were quantified and compared, with special attention given to the type of private health insurance. Results: While people with supplemental private health insurance were more likely to use high-cost outpatient imaging tests than those without, both before and after the expansion of MRI coverage, the incremental effect increased from 1.6% points in 2017 to 2.5% points in 2019. Conclusion: Benefit expansion in NHI does not necessarily reduce disparities in the use of health care between private health insurance subscribers and non-subscribers. The results of our study also suggest that the path through which private health insurance affects healthcare utilization may not be limited to the price mechanism alone but can be more complex.

• Korean Journal of Metals and Materials
• /
• v.48 no.12
• /
• pp.1064-1069
• /
• 2010

Thin films have been used in a large variety of technological applications such as solar cells, optical memories, photolithographic masks, protective coatings, and electronic contacts. If thin films experience frequent temperature changes, thermal stresses are generated due to the difference in the coefficient of thermal expansion between the film and substrate. Thermal stresses may lead to damage or deformation in thin film used in electronic devices and micro-machined structures. Thus, knowledge of the thermomechanical properties of thin films, such as the coefficient of thermal expansion, is an important issue in determining the stability and reliability of the thin film devices. In this study, thermal cycling of Cu and Ag thin films with various microstructures was employed to assess the coefficient of thermal expansion of the films. The result revealed that the coefficient of thermal expansion (CTE) of the Cu and Ag thin films increased with an increasing grain size. However, the effect of film thickness on the CTE did not show a remarkable difference.

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.150-160
• /
• 2019

Objective: This study aimed to analyze the effect of changing various parameters of the bone-borne rapid palatal expander (RPE) using the finite element method (FEM). Methods: In eight experimental groups, we investigated the effect of the number, position, and length of miniscrews; positional changes of the expander; and changes in the hook length on maxillary expansion. In finite element analysis, we compared the magnitude and distribution of stress, and the displacement changes following expansion of the bone-borne RPE. Results: When we compared the number and position of miniscrews, placing miniscrews in the anterior and posterior sides was advantageous for maxillary expansion in terms of stress distribution and displacement changes. Miniscrew length did not significantly affect stress distribution and displacement changes. Furthermore, anteroposterior displacement of the expander did not significantly affect transverse maxillary expansion but had various effects on vertical changes of the maxilla. The maxilla rotated clockwise when the miniscrews were placed in the anterior region. The hook length of the expander did not show consistent results in terms of changes in stress distribution and magnitude or in displacement changes. Conclusions: The findings of this study suggest that changes in the location and length of the miniscrews and displacement of the bone-borne RPE could affect the pattern of the maxillary expansion, depending on the combination of these factors.

• Korean Journal of Materials Research
• /
• v.24 no.10
• /
• pp.515-519
• /
• 2014

The aim of this paper is to consider the effect of annealing on the coefficient of thermal expansion (CTE) of electroplated Invar Fe-Ni alloy. The CTE of the as-electroplated alloy is lower than those of alloys annealed at $400^{\circ}C$ and $800^{\circ}C$. XRD peaks become sharper as the as-electroplated alloy is annealed, which means the grain growth. The average grain sizes of as-electroplated and as-annealed alloys at $400^{\circ}C$ and $800^{\circ}C$ are 10 nm, 70 nm, and $2{\mu}m$, respectively, as determined by TEM and EBSD analyses. The CTE variation for the various grain sizes after annealing may come from the magnetostriction effect, which generates strain due to changes in the magnetization state of the alloys. The thermal expansion coefficient is considered to be affected by nano grain size in electroplated Fe-Ni Invar alloys. As grain size decreases, ferromagnetic forces might change to paramagnetic forces. The effect of lattice vibration damping of nano grain boundaries could lead to the decrease of CTE.

• Asia-Pacific Journal of Business
• /
• v.9 no.1
• /
• pp.57-76
• /
• 2018

This paper studies the influence of the bilateral expansion of Korean and Chinese banks on performance. To conduct the empirical analysis, we select eleven Banks in South Korea and thirteen Banks in China over the 2000-2014 time frame. The main regression results are as followed. First, the sample bank's overseas subsidiaries have a significant effect on profitability and the profitability is somewhat deteriorates. Second, the sample bank's overseas branch and subsidiaries have a significant effect on the bank's risk. That is, the loan loss provision ratio is slightly increased but impaired loan ratio is highly decreased. Third, the sample banks' overseas branch and subsidiaries also have a significant effect on bank efficiency. The ratio of customer deposits per employee worsens somewhat but the gross loan per employee are increased. In conclusion, as time passes, bank profitability or efficiency from mutual expansion of Korean banks and Chinese banks seem to be improving somewhat, and this phenomenon is more prominent at Korean banks than at Chinese banks.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1239-1242
• /
• 1998

In television stereo system, to produce a realistic sound effect is very difficult because the distance between stereo speakers is very narrow. Many signal processing methods of widening the sound image for spatial impression have been studied. One of the methods of widening the sound image is using the Precedence Effect by reflected sound. However, this method does not work effectively in lower frequencies because of directivity of a speaker. In this paper, we propose an effective method of expanding stereo image using Precedence Effect and Phase Shifting method to produce a whole band frequency sound expansion. In experiments, we confirm the usefulness of the proposed stereo sound image expansion system.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.102-106
• /
• 1988

Generally, average invest cost is widely used for expansion planning of generation in power system. But, other cost which is followed by adding generating capacity in electric system is increased in accordance with increasing plant reasons. In this study, we represent the invest cost with quadratic function and analyze its effect on the expansion planning. It is hoped that this method is used in expansion planning of generating system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2552-2559
• /
• 2000

Most of ferrous b.c.c weld materials have martensitic transformation during rapid cooling after welding. It is well known that volume expansion due to the phase transformation could influence on the relaxation of welding residual stress. To apply this effect practically, it is necessary to establish a numerical model which is able to estimate the effect of phase transformation on residual stress relaxation quantitatively. For this purpose, the analysis is carried out in two regions, i.e., heating and cooling, because the variation of material properties following a phase transformation in cooling is different in comparison with the case in heating, even at the same temperature. The variation of material properties following phase transformation is considered by the adjustment of specific heat and thermal expansion coefficient, and the distribution of residual stress in analysis is compared with that of experiment by previous study. In this study, simplified numerical procedures considering phase transformation, which based on a commercial finite element package was established through comparing with the experimental data of residual stress distribution by other researcher. To consider the phase transformation effect on residual stress relaxation, the transition of mechanical and thermal property such as thermal expansion coefficient and specific heat capacity was found by try and error method in this analysis. In addition to, since the transformation temperature changes by the kind and control of alloying elements, the steel with many kinds of transformation temperature were selected and the effect of transformation on stress releasement was investigated by the numerical procedures considering phase transformation.