• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.998-1008
• /
• 2000

The continuous circular cylindrical shells are widely used for the high performance structures of aircraft, spacecraft, missile, nuclear fuel rod shell etc.. In this paper, a method for the free vibration analysis of the continuous circular cylindrical shells with the multiple simple supports is developed by using the receptance method. With this method, the vibrational characteristics of the continuous system is analyzed by considering as a combined structure. The system receptance is also derided by the application of the equilibrium of forces and the continuity of displacements at the support points. The natural frequencies and mode shapes are calculated numerically and they are compared with the FEM results to improve the reliability of analytical solution. Numerical results on the 4-equal-span continuous circular cylindrical shell are presented in this paper.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.203-206
• /
• 2003

Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.147-156
• /
• 2003

Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.97-105
• /
• 2017

In this study, we investigate how organizational learning affects corporate performance through the medium of intangible assets. And based on the relationship, we tried to empirically analyze organizational learning and intangible assets typified by purpose. Although trianing on the business performance method affects positively on product / service improvement and market dominance expansion, training on the knowledge management method has a positive effect only on product / service improvement, Respectively. As a result of analyzing the mediating effects, it was found that the training on the business performance method was mediating only to the expansion of market dominance, and trianing on the knowledge management method and the cost of organizational learning was not mediated. Therefore, it is found that the operation of organizational learning and the acquisition of intangible assets are essential to improve corporate performance.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.89-98
• /
• 1993

As the construction of nuclear power plants are increased, nuclear wastes disposal has been faced as a serious problem. If nuclear wastes are to be buried in the underground stratum, thermo-mechanical behavior of stratum must be analyzed, because high temperature distribution has a significant effect on tunnel and surrounding stratum. In this study, in order to analyze the structural behavior of the underground which is subject to concentrated heat sources, a coupling method of nonlinear finite elements and linear boundary elements is proposed. The nonlinear finite elements (NFE) are applied in the vicinity of nuclear depository where thermo-mechanical stress is concentrated. The boundary elements are also used in infinite domain where linear behavior is expected. Using the similar method as for the problem in mechanical field, the coupled nonlinear finite element-boundary element (NFEBE) is developed. It is found that NFEBE method is more efficient than NFE which considers nonlinearity in the whole domain for the nuclear wastes depository that is expected to exhibit local nonlinearity behavior. The effect of coefficients of the rock mass such as Poisson's ratio, elastic modulus, thermal diffusivity and thermal expansion coefficient is investigated through the developed method. As a result, it is revealed that the displacements around tunnel are largely dependent on the thermal expansion coefficients.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.2
• /
• pp.83-91
• /
• 2004

The performance of wave control by a surface-mounted horizontal membrane is analyzed in the frame of linear potential theory. To employ the eigenfunction expansion method, the fluid domain is divided into two regions i.e. region without membrane and membrane-covered region. By matching the each solutions at boundaries of adjacent regions, the complete solution is obtained. The present analytical method solving the scattering problem directly gives the same results as Cho and Kim(1998)'s method solving the diffraction and the radiation problem separately. To verify the developed model, the model test with a surface-mounted horizontal membrane is conducted at the wave tank(36m${\times}$0.91m${\times}$l.22m). The analytic results are in good agreement with the experimental results. The reflection and transmission coefficients are investigated according to the change of membrane tension, length and incident frequencies.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.75-82
• /
• 2017

We propose a novel method for modeling emotional dimensions using expansion of Russell's (1980) emotional dimensions (Circumplex Model). The Circumplex Model represents emotional words in two axes (Arousal, Valence). However, other researchers have insisted that location of word in Russell's model which is expressed by single point could not represent exact position. Consequently, it is difficult to apply this model in engineering fields (such as Science of Emotion & Sensibility, Human-Computer-Interaction, Ergonomics, etc.). Therefore, we propose a new modeling method which expresses emotional word not as a single point but as a region. We conducted survey to obtain actual data and derived equations using ellipse formula to represent emotional region. Furthermore, we applied ANEW and IAPS which are commonly used in many studies to our emotional model using pattern recognition algorithm. Using our method, we could solve problems with Russell's model and our model is easily applicable to the field of engineering.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.202-209
• /
• 2005

The rapid development of digital media and communication network urgently brings about the need of data certification technology to protect IPR (Intellectual property right). This paper proposed a new watermarking method for embedding owner's audio signal. Because this method uses an audio signal as a watermark to be embedded, it is very useful to claim the ownership aurally. And it has the advantage of restoring audio signal modified and especially removed by image removing attacks by applying our LBX(Linear Bit-expansion) interleaving. Three basic stages of our watermarking include: 1) Encode . analogue owner's audio signal by PCM and create new digital audio watermark, 2) Interleave an audio watermark by our LBX; and 3) Embed the interleaved audio watermark in the low frequency band on DTn (Discrete Haar Wavelet Transform) of image. The experimental results prove that this method is resistant to lossy JPEG compression as standard image compression and especially to cropping and rotation which remove a part of Image.

• Korean Journal of Materials Research
• /
• v.27 no.4
• /
• pp.179-183
• /
• 2017

$2ZrO_2{\cdot}P_2O_5$ powder, which is not synthesized by solid reaction method, was successfully synthesized through PVA solution method. In this process, the firing temperature and the PVA content strongly affected the crystallization behavior and final particle size. A stable ${\alpha}$-phase $2ZrO_2{\cdot}P_2O_5$ was synthesized at a firing temperature of $1200^{\circ}C$ and holding time of 4 h. ${\beta}$-phase $2ZrO_2{\cdot}P_2O_5$ was observed, with un-reacted $ZrO_2$ phases, for firing temperatures lower than $1200^{\circ}C$. In terms of the PVA content effect, the powder prepared with a PVA mixing ratio of 12:1 showed stable ${\alpha}$-phase $2ZrO_2{\cdot}P_2O_5$; however, the ${\beta}$-phase was found to co-exist at relatively higher PVA content. The synthesized ${\alpha}$-phase $2ZrO_2{\cdot}P_2O_5$ powder showed an average particle size of 100~250 nm and an average thermal expansion coefficient of $-2.5{\times}10^{-6}/^{\circ}C$ in the range of room temp. ${\sim}800^{\circ}C$.

• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.83-101
• /
• 2021

The high-density polyurethane method uses the instantaneous expansion pressure of injected material to stabilize soft ground, allowing reinforcement, restoration, and construction to be carried out in suboptimal ground conditions. Under normal and, even poor conditions, the method is easily applied because the working time is very short. The method is environmentally friendly and results have excellent durability. The purpose of this study was to verify the physical and mechanical properties of high-density polyurethane in the ground. Initial testing of strength, direct shear, and soil environment stability was followed by testing for permeability in order to address environmental concerns. The results of the experiments showed that the internal friction angle was about twice as high and the adhesion was about 2.5 to 3.5 times higher than for dense and hard clay, and that the permeability factor was significantly lower compared with the existing grouting method, within the range of 1.0 × 10-5.