• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.646-652
• /
• 2009

Present study deals with a three phase flow problem of determining drag acting on spheres wetted by liquid flow by gas flow through the spheres in simple cubic (SC), body-center cubic (BCC) and face-centered cubic (FCC) array, respectively, when the inertia of gas is negligibly small. The liquid flow driven by gravity on the spheres is assumed to be unaffected by the countercurrent gas flow. A perturbation method coupled with a multipole expansion method is used to calculate the hydrodynamic interactions between spheres and hence determine the effect of liquid film and flow on the gas flow for each periodic array of spheres. An approximate method for evaluating the effect of the liquid film is also presented for simple estimations. It is found that the approximation results are in a reasonable agreement with the numerical calculations.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.843-848
• /
• 2000

BEA(Boundary Element Analysis) based on Kirchhoff-Helmholtz integral equation is widely used in the prediction of sound radiation problems of vibrating structures. Accurate estimation of sound pressure distribution by BEA can be [possible if and only if dynamic behavior of the relating structure was described correctly. Another plausible method of sound radiation phenomena could be the NAH(Nearfield Acoustic Holography) method. NAH also based on the identical governing equation with BEA could be one of the best acoustic imaging schemes but it has disadvantages of the complexity of measurement and of the need of large amount of measuring points. In this paper, modal expansion method is presented for taking accurate dynamic data of the structures efficiently. This method makes use of vibration principle an arbitrary dynamic behavior of the structure is described by the summation of that structures mode shapes which can be calculated by FEA easily and accurately. Sound pressure field from a vibration flat plate is calculated using the combination of vibration signal on that flat plate from experiment, and of the natural mode shapes form FEA. When sound pressure field from vibration signal is calculated the importance of the phase information was emphasized.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.130-134
• /
• 2013

Most electrical machines like motor, generator and transformer are symmetric in terms of magnetic field distribution and mechanical structure. In order to analyze these problems effectively, many coupling techniques have been introduced. This paper deals with a coupling scheme for open boundary problem of symmetric and periodic structure. It couples an analytical solution of Fourier series expansion with the standard finite element method. The analytical solution is derived for the magnetic field in the outside of the boundary, and the finite element method is for the magnetic field in the inside with source current and magnetic materials. The main advantage of the proposed method is that it retains sparsity and symmetry of system matrix like the standard FEM and it can also be easily applied to symmetric and periodic problems. Also, unknowns of finite elements at the boundary are coupled with Fourier series coefficients. The boundary conditions are used to derive a coupled system equation expressed in matrix form. The proposed algorithm is validated using a test model of a bush bar for the power supply. And the each result is compared with analytical solution respectively.

• Structural Engineering and Mechanics
• /
• v.83 no.1
• /
• pp.79-92
• /
• 2022

In this paper, the impact of a vernacular pozzolanic kaolinite mine on concrete alkali-silica reaction and strength has been evaluated. For making the samples, kaolinite powder with various levels has been used in the quality specification test of aggregates based on the ASTM C1260 standard in order to investigate the effect of kaolinite particles on reducing the reaction of the mortar bars. The compressive strength, X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) experiments have been performed on concrete specimens. The obtained results show that addition of kaolinite powder to concrete will cause a pozzolanic reaction and decrease the permeability of concrete samples comparing to the reference concrete specimen. Further, various machine learning methods have been used to predict ASR-induced expansion per different amounts of kaolinite. In the process of modeling methods, optimal method is considered to have the lowest mean square error (MSE) simultaneous to having the highest correlation coefficient (R). Therefore, to evaluate the efficiency of the proposed model, the results of the support vector machine (SVM) method were compared with the decision tree method, regression analysis and neural network algorithm. The results of comparison of forecasting tools showed that support vector machines have outperformed the results of other methods. Therefore, the support vector machine method can be mentioned as an effective approach to predict ASR-induced expansion.

• Steel and Composite Structures
• /
• v.43 no.2
• /
• pp.241-256
• /
• 2022

In this article, an analytical procedure is presented for static analysis of composite cylinders with the geometrically nonlinear behavior, and non-uniform thickness profiles under different loading conditions by considering moderately large deformation. The composite cylinder includes two inner and outer isotropic layers and one honeycomb core layer with adjustable Poisson's ratio. The Mirsky-Herman theory in conjunction with the von-Karman nonlinear theory is employed to extract the governing equations which are a system of nonlinear differential equations with variable coefficients. The governing equations are solved analytically using the matched asymptotic expansion (MAE) method of the perturbation technique and the effects of moderately large deformations are studied. The presented method obtains the results with fast convergence and high accuracy even in the regions near the boundaries. Highlights: • An analytical procedure based on the matched asymptotic expansion method is proposed for the static nonlinear analysis of composite cylindrical shells with a honeycomb core layer and non-uniform thickness. • The effect of moderately large deformation has been considered in the kinematic relations by assuming the nonlinear von Karman theory. • By conducting a parametric study, the effect of the honeycomb structure on the results is studied. • By adjusting the Poisson ratio, the effect of auxetic behavior on the nonlinear results is investigated.

• Imaging Science in Dentistry
• /
• v.43 no.2
• /
• pp.85-90
• /
• 2013

Purpose: This study was performed to determine the buccal alveolar bone thickness following rapid maxillary expansion (RME) using cone-beam computed tomography (CBCT). Materials and Methods: Twenty-four individuals (15 females, 9 males; 13.9 years) that underwent RME therapy were included. Each patient had CBCT images available before (T1), after (T2), and 2 to 3 years after (T3) maxillary expansion therapy. Coronal multiplanar reconstruction images were used to measure the linear transverse dimensions, inclinations of teeth, and thickness of the buccal alveolar bone. One-way ANOVA analysis was used to compare the changes between the three times of imaging. Pairwise comparisons were made with the Bonferroni method. The level of significance was established at p<0.05. Results: The mean changes between the points in time yielded significant differences for both molar and premolar transverse measurements between T1 and T2 (p<0.05) and between T1 and T3 (p<0.05). When evaluating the effect of maxillary expansion on the amount of buccal alveolar bone, a decrease between T1 and T2 and an increase between T2 and T3 were found in the buccal bone thickness of both the maxillary first premolars and maxillary first molars. However, these changes were not significant. Similar changes were observed for the angular measurements. Conclusion: RME resulted in non-significant reduction of buccal bone between T1 and T2. These changes were reversible in the long-term with no evident deleterious effects on the alveolar buccal bone.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.3
• /
• pp.247-256
• /
• 2011

Purpose : The purpose of this study were to determine whether changes of position might effect the chest expansion and pulmonary function of the 20s men obesity. Methods : Thirty subjects with obesity(M:30, % fat>25.0) and thirty normal subjects(M:30, % fat<24.9) were participated in experiment. Subjects were assessed according to position changes(supine position, $45^{\circ}$ lean sitting position, $90^{\circ}$ sitting position) using chest length(chest length for resting, chest expansion) and pulmonary function (Tidal volume, Inspiratory capacity, Vital capacity, Inspiratory reserve volume, Expiratory reserve volume) by the CardioTouch 3000S(BIONET, USA). Repeated measure ANOVA was used to compare each region data of chest length and pulmonary function according to changes of position with obesity and normal subjects. Results : These findings suggest that the obesity can be appear to low chest expansion and pulmonary function than normal subjects on position method. In comparison of three experimental position, supine position was more low. Conclusion : This study showed position of the obesity appear low chest expansion and function of pulmonary volume than normal subjects, and thus it indicates that the pulmonary function of the obesity will be suggest objective respiratory data through the exercise program.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.473-481
• /
• 2010

Maxillary canine impaction is an anomaly often encountered in children. Although it has been reported that the incidence of palatally impacted canines is higher than that of labially impacted ones, it has been found that labial impaction of canines is more common than palatal impaction in Asian populations. In the cases presented here, maxillary canines were guided normally after rapid palatal expansion, followed by modification of root angulation of neighboring lateral incisors in 8-10-year-old children who had maxillary canines suspected of labial impaction. Consequently, the method of modifying the root angulation of the maxillary lateral incisor, combined with rapid palatal expansion, is effective in preventing impaction of an ectopically erupting maxillary canine without resorting to surgical methods.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.309-320
• /
• 2003

Since the concrete covers most structures in modern architecture and it is composed of aggregates of about 75%, the appropriate selection of aggregates is valuable for the durability of concrete. A major cause of the expansion of mortar-bar measured by ASTM C 227-90 has been accounted by the alkali-aggregate reaction. This study carried out designed experiments on some aggregates including basalt and sandstone, to classify the expansion factors into the alkali-aggregate reaction, the increase of the gel pore volume, and the interstitial water that could expand physically the cracks or foliation developed in aggregates itself. The quantitative analyses of expansion by each factor indicated that the interstitial water and/or the alkali-aggregate reaction had major roles in the concrete expansion. Thus, if the supplied aggregates have deteriorated the structural framework, it is important to investigate the exact causes through this suggested method.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.3
• /
• pp.204-213
• /
• 2016

Syndromic craniosynostosis has severe cranial stenosis and deformity, combined with hypoplastic maxillary bone and other developmental skeletal lesions. Among these various lesions, upper air way obstruction by hypoplastic maxillary bone could be the first life-threatening condition after birth. Aggressive cranial vault expansion for severely deformed cranial vaults due to multiple synostoses is necessary even in infancy, to normalize the intracranial pressure. Fronto-orbital advancement (FOA) is recommended for patients with hypoplastic anterior part of cranium induced by bicoronal and/or metopic synostoses, and posterior cranial vault expansion is recommended for those with flattening of the posterior part of the cranium by lambdoid synostosis. Although sufficient spontaneous reshaping of the cranium can be expected by expansive cranioplasty, keeping the cranial bone flap expanded sufficiently is often difficult when the initial expansion is performed during infancy. So far distraction osteogenesis (DO) is the only method to make it possible and to provide low rates of re-expansion of the cranial vault. DO is quite beneficial for both FOA and posterior cranial vault expansion, compared with the conventional methods. Associated hydrocephalus and chronic tonsillar herniation due to lambdoid synostosis can be surgically treatable. Abnormal venous drainages from the intracranial space and air way obstruction should be always considered at any surgical procedures. Neurosurgeons have to know well about the managements not only of the deformed cranial vault and the associated brain lesions but also of other multiple skeletal lesions associated with syndromic craniosynostosis, to improve treatment outcome.