• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.503-518
• /
• 2012

Korean type of no-tillage cultivation method which was applied on this study used the ridge and the furrow and constantly recycling them as it was suitable for Korea's weather and farming conditions. This no-tillage cultivation was reported to have little negative impact such as reduction of production (Kwon et al., 1997). In addition, it was found to have a lot of benefits as it requires less agro-materials and energy costs as well as shortened working hours because tillage operation is not needed. (Yang et al., 2012). According to an analysis, no-tillage cultivation can reduce greenhouse gas emissions by $344.7kgCO^2$ (58%) in every 10a ($1,000m^2$) compared to ordinary pepper farming technique (Korea averages). Direct-indirect reduction effects from using fertilizer and using less amount of energy were 92% and 44% respectively both of which can be considered very high. Besides the direct effects of no-tillage cultivation, soil management using no-tillage technique raises carbon sequestration effect on soil as time goes on (West & Marland, 2002), that is why the technique is expected to have constant carbon emission reduction effect. For theses reasons, distribution and expansion of Korean type no-tillage cultivation are expected to play a role as major agro-green technologies for achieving our goal of reducing greenhouse gas emissions in agricultural sector.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.91-101
• /
• 2010

This paper has the purpose of suggesting a development-method on the fashion products that would secure the competitiveness in the global markets through creating supersensitive practical products on the basis of developing originative fashion-goods being made of jacquard that is fine quality of couture. This paper has collected data through the cases of the developed nations in fashion, precedent studies and all the related literature on the subject. The results of this researching are as following: The first, it is expected that the necessity of developing new fashion products would be appealed toward the prestige group of consumers who are seeking for the fine quality and super-sensitivity in female fashion in Korea, and it is the current situation that the products made of jacquard are gradually expanding not only in the area of apparel, fashion goods and interior but also another areas. The current situation of the global market suggests the necessary strategy of survival, that is, the development of supersensitive materials and creative products which would be able to keep the high quality and lower the selling price through cost reduction. The second, the suggestion of the direction in developing the products of the female fashion made of jacquard has two points - the development of the texture that would realize a unique form and the development of the material that would be able to realize planar pattern and three dimensional pattern which are woven with thin and light materials with various solidity and delicacy through various techniques of mixing and three dimensional expression. The third, the expected ripple effect and utilization generated from the development of fashion products are as followings: As material characteristics of jacquard, It needs the specialization of various techniques and specialized production system in using jacquard, and the specialized technique and system would make it possible to produce not only the higher value-added products through expressing affluent colors and delicate design but also competitive products through cutting the process and cost, eventually, it would lead to the expansion of the jacquard market of super-sensitive prestige. Therefore, it is remarkable that various development of products toward the global market and the prestige female fashion market can suggest the vision that make the national fashion industry develop into the higher value-added knowledge industry integrating technology and culture.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.3
• /
• pp.131-141
• /
• 2013

Stock identification of Todarodes pacificus collected in the East Sea, Yellow Sea and East China Sea during the period from September to December in 2011 was analyzed by morphometric characters and mitochondrial DNA (mtDNA) cytochrome oxidase subunit I (COI) gene nucleotide variations. Frequency distributions of mantle length was analyzed by morphological method with measuring size of T. pacificus. Then each stock was estimated to confirm their maturation for mean mantle length comparing with mean mature mantle length 20-22 cm. According to morphologic stock identification, it is estimated that the northern part of East Sea is categorized as summer stock and the rest parts, including mid /southern part of the East Sea, northern part of the East China Sea and northern part of the West Sea were autumn stock. For genetic analysis, a total 49 haplotypes were defined by 33 variable nucleotide sites. From the extensive haplotype diversity, limited nucleotide diversity and star-like shape of haplotype network, T. pacificus appears to have undergone rapid population expansion from an ancestral population with a small effective population size. Although pair-wise Fst estimates which represent genetic difference among groups were low, there are relatively remarkable difference of Fst between middle and southern part of the East Sea. Although middle part of the East Sea and southern part of the East Sea were situated at the East Sea, genetically separated groups were appeared.

• Korean Journal of Animal Reproduction
• /
• v.17 no.4
• /
• pp.331-337
• /
• 1994

Response of the oocytes to parthenogenetic activation is one of the indice for cytoplasmic maturation. Maturational age-dependent parthenogenetic activation was examined in bovine oocytes. Follicular oocytes recovered from the slaughter house ovaries were matured in vitro in TCM 199+15% FCS+1Oiu/ml PMSG +10 iu/ml hCG from 24 to 48 h at 6 h intervals. The in vitro matured oocytes were activated by 7% ethanol for 7 min. The nuclear maturation and the cytoplasmic maturation were analysed by the nuclear configuration and pronuclei formation stained by rapid staining method. Cumulus oophori expansion increased as the maturation time increased. Proportions of the nuclear maturation were 81, 89, 72, 60 and 60% in IVM 24, 30, 36, 42 and 48 h groups, respectively. Abnor¬mality in metaphase II chromosome increased sharply from 36 h IVM. The rates of the pronuclei formation and diploid upon ethanol activation were 67, 68, 73, 84 and 87%, and 4, 5, 10, 16 and 20% in IVM 24, 30, 36, 42 and 48 h groups, respectively. It was suggested that maturational age increased the formation of the pronuclei and diploid, and that cytoplasmic maturation require longer maturation period than normal nuclear maturation. These results should be useful for determination of an appropriate time for fertilization in mammalian eggs matured or preincubated in vitro.

• Journal of Surface Science and Engineering
• /
• v.46 no.2
• /
• pp.68-74
• /
• 2013

For the coating of diamond films on WC-Co tools, a buffer interlayer is needed because Co catalyzes diamond into graphite. W and Ti were chosen as candidate interlayer materials to prevent the diffusion of Co during diamond deposition. W or Ti interlayer of $1{\mu}m$ thickness was deposited on WC-Co substrate under Ar in a DC magnetron sputter. After seeding treatment of the interlayer-deposited specimens in an ultrasonic bath containing nanometer diamond powders, $2{\mu}m$ thick nanocrystalline diamond (NCD) films were deposited at $600^{\circ}C$ over the metal layers in a 2.45 GHz microwave plasma CVD system. The cross-sectional morphology of films was observed by FESEM. X-ray diffraction and visual Raman spectroscopy were used to confirm the NCD crystal structure. Micro hardness was measured by nano-indenter. The coefficient of friction (COF) was measured by tribology test using ball on disk method. After tribology test, wear tracks were examined by optical microscope and alpha step profiler. Rockwell C indentation test was performed to characterize the adhesion between films and substrate. Ti and W were found good interlayer materials to act as Co diffusion barriers and diamond nucleation layers. The COFs on NCD films with W or Ti interlayer were measured as less than 0.1 whereas that on bare WC-Co was 0.6~1.0. However, W interlayer exhibited better results than Ti in terms of the adhesion to WC-Co substrate and to NCD film. This result is believed to be due to smaller difference in the coefficients of thermal expansion of the related films in the case of W interlayer than Ti one. By varying the thickness of W interlayer as 1, 2, and $4{\mu}m$ with a fixed $2{\mu}m$ thick NCD film, no difference in COF and wear behavior but a significant change in adhesion was observed. It was shown that the thicker the interlayer, the stronger the adhesion. It is suggested that thicker W interlayer is more effective in relieving the residual stress of NCD film during cooling after deposition and results in stronger adhesion.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.140-140
• /
• 2018

The 3D interconnect technologies have been appeared, as the density of Integrated Circuit (IC) devices increases. Through Silicon Via (TSV) process is an important technology in the 3D interconnect technologies. And the process is used to form a vertically electrical connection through silicon dies. This TSV process has some advantages that short length of interconnection, high interconnection density, low electrical resistance, and low power consumption. Because of these advantages, TSVs could improve the device performance higher. The fabrication process of TSV has several steps such as TSV etching, insulator deposition, seed layer deposition, metallization, planarization, and assembly. Among them, TSV metallization (i.e. TSV filling) was core process in the fabrication process of TSV because TSV metallization determines the performance and reliability of the TSV interconnect. TSVs were commonly filled with metals by using the simple electrochemical deposition method. However, since the aspect ratio of TSVs was become a higher, it was easy to occur voids and copper filling of TSVs became more difficult. Using some additives like an accelerator, suppressor and leveler for the void-free filling of TSVs, deposition rate of bottom could be fast whereas deposition of side walls could be inhibited. The suppressor was adsorbed surface of via easily because of its higher molecular weight than the accelerator. However, for high aspect ratio TSV fillers, the growth of the top of via can be accelerated because the suppressor is replaced by an accelerator. The substitution of the accelerator and the suppressor caused the side wall growth and defect generation. The suppressor was used as Single additive electrodeposition of TSV to overcome the constraints. At the electrochemical deposition of high aspect ratio of TSVs, the suppressor as single additive could effectively suppress the growth of the top surface and the void-free bottom-up filling became possible. Generally, copper was used to fill TSVs since its low resistivity could reduce the RC delay of the interconnection. However, because of the large Coefficients of Thermal Expansion (CTE) mismatch between silicon and copper, stress was induced to the silicon around the TSVs at the annealing process. The Keep Out Zone (KOZ), the stressed area in the silicon, could affect carrier mobility and could cause degradation of the device performance. Cobalt can be used as an alternative material because the CTE of cobalt was lower than that of copper. Therefore, using cobalt could reduce KOZ and improve device performance. In this study, high-aspect ratio TSVs were filled with cobalt using the electrochemical deposition. And the filling performance was enhanced by using the suppressor as single additive. Electrochemical analysis explains the effect of suppressor in the cobalt filling bath and the effect of filling behavior at condition such as current type was investigated.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.333-344
• /
• 2011

The recent expansion in the number of housing construction projects has been accompanied by substantial improvements in construction quality, which can be attributed to the development of new construction technologies and materials. In apartment complex construction projects, numerous mechanization technologies have been adopted as part of the floor plastering process to counter increasing difficulties in securing labor and the pressing need to reduce lead time, but these have also triggered setbacks such as additional costs or loss of time to fix cracks in or loosening of floor. Cracks developing in the floor of an apartment housing unit, in terms of materials in use, are the products of a complex combination of material makeup, construction workmanship, concrete curing and the protection method. Controlling such elements from the perspective of materials in use may ensure partial success in reducing cracks, but fall short of eliminating them completely. Any attempt to prevent cracks from developing in the first place requires systematic analysis as to their potential causes and viable solutions to reduce them. On this backdrop, this paper aims to provide an analysis of potential causes of cracks found in floor plastering, and consider the mechanism of a crack stop-bar as a fundamental safeguard against them.

• The Korean Journal of Archival Studies
• /
• no.63
• /
• pp.145-165
• /
• 2020

, in collaboration with Mary Kelly, Kay Hunt and Margaret Harrison, tells the story of workers in the 1970s. Since the late 1960s, the world has undergone many political and social changes, and social movements have been active to protect the socially underprivileged, including women, children and workers. This phenomenon led to the diversification of the collection of the general public, the community, and the minority, and the expansion of the artist's political remarks and themes in the art world. , completed in conjunction with these social issues, surveyed and recorded the reality of workers in a factory in London and produced it as a artwork. is a collaborative work of three artists, a record of workers in the 1970s, and a record of the labor situation, factory, and even the history of the region. Therefore, this study examined the methods and features of , which dealt with the lives of women workers in the 1970s, based on social conditions.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.140-145
• /
• 2006

The mort commonly available substrate material is glass in the display fibrication process. However, glass is not desirable due to its heaviness and fragility. Recently, plastics such polysulfone (PSF), polyethesulfone (PES), polycarbonate (PC), polyethylene terephthalate (PET) and cyclic olefin polymers (COP) have been investigated to replace glass as a substrate material for display fibrication. Plastic substrates are advantageous in that they are lightweight, huh impart resistance, flexibility, and ability for roll to roll manufacturing process. But many plastics have poor chemical resistance in organic solvent. The chemica resistance is also lequired because they are exposed to solvents for various chemical treatments din the manufacturing process. So, we have an interest in the chemical modification of PSF to improve chemical resistance. We introduced crosslinkable imide moieties using chloromethylation method for the modification of PSF which could be overcome above shortcomings for display substrate based on plastic film. We prepared the cross-linked polysulfone films which were represented chemical resistance in HeOH, THF, DMSO and NMP. The thermal properties were measured by TGA, DSC and TMA. As the results, we have confirmed to enhance of the thermal property. They had low coefficient of thermal expansion (CTE) which decreased to 15% and had increased $T_g\;from\;180^{\circ}C\;to\;252^{\circ}C$. Cross-linked polysulfone films with imide side-chain had good optical properties and chemical resistance so that they could be used as flexible display substrate.