• Korean Journal of Social Welfare
• /
• v.66 no.3
• /
• pp.159-183
• /
• 2014

This study is to deeply investigate the process experience of making the local organization with the supervisors and the social workers-in-field with the research question, 'how is the project process of community building leaded by community welfare centers'. For this, 6 community welfare centers were selected among 22 ones participated in the public contest of Seoul Welfare Foundation, and 15 line workers including the top supervisors working there were selected as the research participants and interviewed. The interview source materials of research participants were analyzed using the method of consistent comparison of Strauss and Corbin(1996). According to the result of the research, the project process of community building leaded by community welfare centers indicated 4 phases such as 'the step of change of recognition', 'the step of mutual communication', 'the step of cooperation expansion', and 'initiative construction'. With the result of this study, I supposed political and practical tasks for promoting that local residents voluntarily build the community and the change of paradigm that is community welfare centers for local residents. Also, this study will be relevant that the result of this study is offered as base line data for extending theoretical and practical discussion about building community depending on characteristic of community and community welfare centers.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.679-686
• /
• 2014

This study analysed differences between importance and performance of 2014 forest interpreter training program through IPA with the aim to provide suggestions and improvement. First the results of a comparison of the overall average of performance and importance showed importance is higher than performance. Afterwards, the result of IPA showed that confidence of being an interpreter, active involvement, the understanding of the value of forest, expansion of the understanding of forest, the understanding of the mission of interpreter, and the understanding of the qualification of interpreter, those 6 items belong to the I quadrant. In the case of the II quadrant there were interest of the content of education and to learn a lot of things through education. Next, those how to deal with service, planning interpreter programs, clarity of the content of education, accuracy of the content of education, validity of the content of education, appropriate number of participants, and appropriate time of education involved in III quadrant. Finally, concentration in the education and the understanding of the topic of education situated in IV quadrant.

• Journal of the Korean Home Economics Association
• /
• v.27 no.2
• /
• pp.21-30
• /
• 1989

The U.S. response to increased international competition was examined in the present study in order to have more comprehensive understanding of the U.S. textile and clothing market. The method employed to conduct the study was the analysis of the written materials, interview with professionals, and the survey of the actual situations of the U.S. textile and apparel industries. The results are summarized as follows; 1. Official U.S. textile and apparel trade policy has been quite has been quite protective since 1950's. The protective trend has been embodied in Japan Cotton Textile Export Control (reciprocal trade agreement signed by the U.S. and Japan in 1957), Short Term Arrangement Regarding International Trade in Cotton Textiles, Long Term Cotton Textile Arrangement (1962∼1973), and Multi-fiber Arrangement (1974∼). Other governmental programs designed to improve the competitiveness of the U.S. textile and apparel industries include Long-term Textile and Apparel Products Export-expansion Program, and 807 Trade to take labor cost advantage. 2. Along with the quite protective governmental trade policy, the corporate responses have been made such as new sourcing mixes, investment in technology, specialization in the textile and apparel industries, and recent strategies pursued by retailer's. The apparel industry was subject to pressure from imports that increased at moderate levels, and the U.S. textile and apparel industries have made extensive efforts to adjust to the increasing competition from abroad. The textile and apparel industries have taken steps to increase labor productivity through automation, to speed management to create and introduce new products and new methods, and have lowered indirect overhead costs. Several industrywide promotion campaigns have attempted to establish a greater public awareness of international competition and to develop a preference for apparel produced in the United States. 3. Regarding these response of the U.S. and other situations of world textile and apparel trade market, much of the sense of crisis that pervades Korean textile and apparel industries has to do with the problem of adjusting government and corporate policy. Textile and apparel industry of Korea faces on going pressure to reduce costs, improve quality, increase service, develop new markets, diversify, and differentiate itself from its foreign competitors. The strategies that have been adopted in the past have generally worked in the past, but the time has come to adopt strategies that reflect present conditions. If this is not done, then we stand to lose large segments of these industries, which once lost will not easily be regenerated.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.410-416
• /
• 2015

Recently, a new $Y_2O_3$ coating deposited using the EB-PVD method has been developed for erosion resistant applications in fluorocarbon plasma environments. In this study, surface crack formation in the $Y_2O_3$ coating has been analyzed in terms of residual stress and elastic modulus. The coating, deposited on silicon substrate at temperatures higher than $600^{\circ}C$, showed itself to be sound, without surface cracks. When the residual stress of the coating was measured using the Stoney formula, it was found to be considerably lower than the value calculated using the elastic modulus and thermal expansion coefficient of bulk $Y_2O_3$. In addition, amorphous $SiO_2$ and crystalline $Al_2O_3$ coatings were similarly prepared and their residual stresses were compared to the calculated values. From nano-indentation measurement, the elastic modulus of the $Y_2O_3$ coating in the direction parallel to the coating surface was found to be lower than that in the normal direction. The lower modulus in the parallel direction was confirmed independently using the load-deflection curves of a micro-cantilever made of $Y_2O_3$ coating and from the average residual stress-temperature curve of the coated sample. The elastic modulus in these experiments was around 33 ~ 35 GPa, which is much lower than that of a sintered bulk sample. Thus, this low elastic modulus, which may come from the columnar feather-like structure of the coating, contributed to decreasing the average residual tensile stress. Finally, in terms of toughness and thermal cycling stability, the implications of the lowered elastic modulus are discussed.

• Journal of Korean Academy of Nursing
• /
• v.30 no.1
• /
• pp.84-97
• /
• 2000

The Necessity and Purpose of the Study Recently the number of patients with chronic diseases and the aged patients is increasing steadily. Furthermore, due to the expansion of health insurance system, the number of patients hospitalized in the general hospital is increasing at a surprising speed. However, hospitals urge the early discharge of the patients for the efficiencies of hospital administration, and therefore, the number of patients who must be taken care of in their home is also increasing. Homecare nursing is one of the health care service for the patients at home who require continual attention and care, and now increasing attentions are given to it as one of the professional nursing fields. However, it was almost impossible to find a study on the actual experiences of the homecare nurses written by their own language in Korea, that it also posed a great difficulty in understanding their diverse experience. Considering these situation, this study will help understanding of them, and provide the fundamental data on their experiences for making policies to develop homecare nursing. Methods of Research Phenomenological research method was employed to analyze the lived experiences of homecare nurses fundamentally. Data collection Data were collected from August 1998 to December 1998 from ten homecare nurses who worked for patients under the homecare nursing setting as model cases designated by Seoul Nurses Association and who agreed to the purpose of this study after listening to and understanding the explanation completely. The in-depth interview was carried at the time which was convenient both for the researcher and participants for one or two hours, and recovered with the approval participants. The first interview covered diverse and broad areas like the situation of homecare nursing, and their feelings and thoughts over it, and in the second and third interviews, more specific questions are asked. Data Analysis For the phenomenological analysis, contents analysis was employed. The data collected from the participants were analyzed into the following procedures according to Van Manen 's phenomenological analysis. 1) Reserve the preconception of the researcher by restricting it inside parenthesis. 2) Make a thorough observation of the lived experiences by insight process. 3) Analyze the contents (Find out the repetitive factors) 4) Interpret the essence found. 5) State the meaning of the interpretation. Results and discussion 1. Fear and expectation for the first visit. (unfamiliarity, awkwardness, anxiety, shivering) 2. Mingle with the family (feeling friendly with the family, becoming like a family member) 3. Being proud of her own know-how (learning the know-how, organizing alternatives, building up confidence) 4. Pity for the poor. (criticizing the current government, feeling ashamed, feeling anger) 5. Difficulty of constructing cooperative system with physicians (strenuousness, frustration) 6. Helplessness due to the lack of support system (difficulty to get supplies, annoyance, embarrassment by institutional restraints) 7. Anxiousness for heavy traffic and parking (annoyance, hastiness) 8. Ethical conflicts (pity for the patients and family, skepticism about lengthening life maintenance) 9. Burden for the possible accident (pressure, anxiety, conflict, physical exhaustion) 10. Establishment of identity as a professional (fulfillment, worth, joy) 11. Being distressed at other's ignorance

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.11-14
• /
• 2012

The AlGaN layer has direct wide bandgaps ranging from 3.4 to 6.2 eV. Nowadays, it is becoming more important to fabricate optical devices in an UV region for the many applications. The high quality AlGaN layer is necessary to establish the UV optical devices. However, the growth of AlGaN layer on GaN layer is difficult due to the lattice mismatch and difference thermal expansion coefficient between GaN layer and AlGaN layer. In this paper, we attempted to grow the LED structure on GaN template by mixed-source HVPE method with multi-sliding boat system. We tried to find the optical and lattice transition of active layer by control the Al content in mixed-source. For the growth of epi layer, the HCl and $NH_3$ gas were flowed over the mixed-source and the carrier gas was $N_2$. The temperature of source zone and growth zone was stabled at 900 and $1090^{\circ}C$, respectively. After the growth, we performed the x-ray diffraction (XRD) and electro luminescence (EL) measurement.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.45-50
• /
• 2014

Effects of wet chemical treatment and thermal cycle conditions on the quantitative interfacial adhesion energy of $Cu/SiN_x$ thin film interfaces were evaluated by 4-point bending test method. The test samples were cleaned by chemical treatment after Cu chemical-mechanical polishing (CMP). The thermal cycle test between Cu and $SiN_x$ capping layer was experimented at the temperature, -45 to $175^{\circ}C$ for 250 cycles. The measured interfacial adhesion energy increased from 10.57 to $14.87J/m^2$ after surface chemical treatment. After 250 thermal cycles, the interfacial adhesion energy decreased to $5.64J/m^2$ and $7.34J/m^2$ for without chemical treatment and with chemical treatment, respectively. The delaminated interfaces were confirmed as $Cu/SiN_x$ interface by using the scanning electron microscope and energy dispersive spectroscopy. From X-ray photoelectron spectroscopy analysis results, the relative Cu oxide amounts between $SiN_x$ and Cu decreased by chemical treatment and increased after thermal cycle. The thermal stress due to the mismatch of thermal expansion coefficient during thermal cycle seemed to weaken the $Cu/SiN_x$ interface adhesion, which led to increased CuO amounts at Cu film surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.7-15
• /
• 2011

The travel time value is important factor for the evaluation of feasibility the transportation facility investment. The existing method for calculation of the travel time for each mode uses daily average trip purpose. So the value of travel time is constant because it is estimated with only daily average proportion. This daily constant time value can distort the results of future demands of toll roads or economic appraisals for the projects. The proportion of the trip purpose varies by time periods. Accordingly the value of travel time also varies by time periods. In this study, times periods are classified as morning peak, evening peak, business time off-peak, and non-business time off-peak. And trip purpose proportions are sorted by each time period from raw data of Seoul household trip study, then the value of travel time for each time period is estimated with these sorted purpose proportions. A case study of Seoul Jung-gu and Yongsan-gu performed with newly estimated time value by time periods. The result of benefit calculation with the daily constant time value is overestimated approximately annual 2.5 billion Won compared by time values by time periods. The demands of toll roads are also overestimated with the existing daily constant time value by daily 3,500 vehicles and total revenue of toll roads are overestimated by annually 1 billion Won. In conclusion, the value of travel time by each time period enables the more precise economic evaluation of the transportation facility investment projects, mode choice behavior, and route choice behavior especially for toll roads.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.119-124
• /
• 2009

Stents are frequently used throughout the human body. They keep pathways open in vascular or nonvascular duct for a long time. Therefore its stability is very important factor. In recent years, aconsiderable amount of research has been carried out in order to estimate mechanical properties of the stent such as expansion pressure behavior, radial recoil and longitudinal recoil using FEM (Finite element analyses). However, published works on simulation of stent fatigue behavior using FEM are relatively rare. In this paper, a nonlinear finite-element methodwas employed to analyses the compression of a stent using external pressure and fatigue behavior. Finite element analyses for the stent system were performed using NASTRAN FX. In conclusion this paper shows how the stent is behaved in the body, and its fatigue behavior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.437-447
• /
• 2016

In a nuclear power plant, the fuel assembly, which is composed of fuel rods, burns, and the high temperature can generate power. The fuel rod consists of pellets and a cladding that covers the pellets. It is important to understand the pellet-cladding mechanical interaction with regard to nuclear safety. This paper proposes simulation of the PCMI. The gap between the pellets and the cladding, and the contact pressure are very important for conducting thermal analysis. Since the gap conductance is not known, it has to be determined by a suitable method. This paper suggests a solution. In this study, finite element (FE) contact analysis is conducted considering thermal expansion of the pellets. As the contact causes plastic deformation, this aspect is considered in the analysis. A 3D FE module is developed to analyze the PCMI using FORTRAN 90. The plastic deformation due to the contact between the pellets and the cladding is the major physical phenomenon. The simple analytical solution of a cylinder is proposed and compared with the fuel rod performance code results.